Hitachi Command Suite Global Link Manager Messages Document Organization Product Version Getting Help Contents MK-95HC108-14
© 2014 Hitachi, Ltd. All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or stored in a database or retrieval system for any purpose without the express written permission of Hitachi, Ltd. Hitachi, Ltd., reserves the right to make changes to this document at any time without notice and assumes no responsibility for its use.
Contents Preface...................................................................................................v Intended audience.................................................................................................... vi Product version......................................................................................................... vi Release notes........................................................................................................... vi Document revision level..
5 Messages with IDs Beginning with KAPM................................................ 5-1 KAPM00000 - KAPM09999....................................................................................... 5-2 KAPM10000 - KAPM19999....................................................................................5-275 KAPM40000 - KAPM49999....................................................................................5-359 6 Messages with IDs Beginning with KDJE............................................
Preface This manual describes the messages output by Global Link Manager.
Intended audience This document is intended for storage administrators who use Global Link Manager to operate and manage storage systems, and assumes that readers have: • For building a Global Link Manager system: Knowledge of the server OS (Windows) • For managing paths by using the Global Link Manager GUI: Knowledge of Global Link Manager GUI operations and the HDLM management functionality Product version This document revision applies to Hitachi Global Link Manager version 8.0.0 or later.
Chapter Description Chapter 1, Global Link Manager Messages on page 1-1 Describes the format and types of messages. Chapter 2, Messages with IDs Beginning with HGLM on page 2-1 Lists and describes messages related to Global Link Manager. Chapter 3, Messages with IDs Beginning with KAIE on page 3-1 Lists and describes messages related to Hitachi Command Suite Common Agent Component.
Convention Description Bold Indicates text on a window, other than the window title, including menus, menu options, buttons, fields, and labels. Example: Click OK. Italic Indicates a variable, which is a placeholder for actual text provided by the user or system. Example: copy source-file target-file Note: Angled brackets (< >) are also used to indicate variables. Monospace Indicates text that is displayed on screen or entered by the user.
Logical capacity unit 1 EB Value 1,024 PB or 1,0246 bytes Accessing product documentation The Global Link Manager user documentation is available on the Hitachi Data Systems Portal: https://portal.hds.com. Check this site for the most current documentation, including important updates that may have been made after the release of the product.
x Preface Hitachi Global Link Manager Messages
1 Global Link Manager Messages This chapter describes the message syntax as well as the format and types of message IDs, and provides an overview of Global Link Manager messages.
Message Syntax Global Link Manager is output to the GUI, CLI, and log files. An output message consists of a message ID and message text. Note that some components also output a date, time, and program name to messages. Format and Types of Message IDs Message IDs have the following format: PREFIXnnnnn-Z The message ID consists of the following components: PREFIX Indicates the component that outputs the message.
Prefix Descriptions of Message IDs The following shows message numbers and corresponding functions: KAIF10000 - KAIF29999: Global Link Manager Server messages KAIF30000 - KAIF39999: Global Link Manager GUI messages KAIF40000 - KAIF49999: Global Link Manager Installer messages KAIF50000 - KAIF59999: Global Link Manager audit log messages KAIF60000 - KAIF61999: Global Link Manager Agent messages KAIF62000 - KAIF62999: Global Link Manager Agent Installer messages KAPM Messages related to Hitachi Command Sui
Type (File Name) Output Destination (HGLAM_Trace*.log) Global Link Manager Server Installer Trace Log (HGLAM_TL_Install_yyyy-mm-dd_hhmm-ss.log) system-drive-root-folder or Global-Link-Manager-server-installation-folder \inst Global Link Manager Server Removal Function Trace Log (HGLAM_TL_Remove_yyyy-mm-dd_hhmm-ss.log) Integrated Trace Log C:\Program Files\Hitachi\HNTRLib2\spool (hntr2*.log) InstallShield Log C:\Program Files\InstallShield Installation Information\{ID} (Setup.
2 Messages with IDs Beginning with HGLM This chapter describes messages related to Global Link Manager.
HGLM0000 - HGLM9999 The following table describes messages HGLM0000 to HGLM9999, which are related to Global Link Manager. Table 2-1 HGLM0000 - HGLM9999 (Messages Related to Global Link Manager) Message ID HGLM0000 Message Text An unexpected parse error has occurred. Description The XML-API request is invalid. 1. Invalid request 2. The element does not exist. 3. The attribute does not exist. 4. The attribute value is invalid. HGLM0001 An unexpected error has occurred.
Message ID Message Text Description HGLM0006 An unexpected error occurred while stopping the SNMP process. An attempt to stop the SNMP daemon of Global Link Manager has failed. HGLM0007 The path does not exist. The path does not exist. HGLM0008 The VXVM License is expired The VxVM DMP license has expired. HGLM0009 The state of the path was not updated as expected. The Online or Offline operation produced unexpected results due to reasons such as an error occurred.
2-4 Messages with IDs Beginning with HGLM Hitachi Global Link Manager Messages
3 Messages with IDs Beginning with KAIE This chapter describes messages related to Device Manager Agent.
KAIE10000 - KAIE19999 The following table describes messages KAIE10000 to KAIE19999, which are related to Device Manager Agent. Table 3-1 KAIE10000 - KAIE19999 (Messages Related to Device Manager Agent) Message ID KAIE10401-E Message Text An unexpected exception occurred while calling the addon-module.
Message ID Message Text Description to access these files or directories. If the user does not have permission, grant permission, or change to a user who has permission. KAIE10502-E An attempt to acquire the installation ID has failed. Cause The environment is invalid. An attempt to read the product information file (Device-Manager-agent-installationdirectory/etc/amc_iid) has failed. The installation might not have finished correctly. Action Re-install.
Message ID Message Text Description There are no registered add-on modules or there are no usable registered add-on modules. Action No additional action is required. KAIE16606-I A specified add-on module was not found. Cause The specified add-on module is not registered, or it is registered but is currently disabled. Action When using a specified add-on module, make sure that the specified add-on module is installed and is supported on this platform.
Message ID Message Text Description information and contact the support center. KAIE20101-E An unexpected error occurred during processing of the request. (messageID = messageID) Cause An unexpected error occurred during processing of the request. There might be a memory shortage or an internal error. Action Make sure that there are no memory shortages, and then restart the service. If this does not resolve the problem, collect maintenance information and contact the support center.
Message ID KAIE20403-E Message Text An I/O error occurred during the HTTP service. Description Cause An I/O error occurred while communicating with the remote host. The remote host might have severed the connection, or there might be a network error or memory shortage. Action If it was not a normal disconnection by the remote host, make sure that there are no network errors or memory shortages, and then restart the service.
Message ID KAIE20703-E Message Text The log output destination directory directoryName is not writable. Description Cause The log output destination directory (Device-Manager-agent-installationdirectory/agent/logs) is read-only. Action Make the log output destination directory writable. KAIE20704-E An I/O error occurred during processing of the log settings. Cause An attempt to access the log property file (Device-Manager-agentinstallation-directory/agent/config/ logger.properties) has failed.
Message ID Message Text Description Delete the directory which has the same name as the log output file. KAIE20706-E The file is not writable. (file path = filePath) Cause One of the following log output files is not writable because the user who is executing the service does not have write permissions for that file: • Device-Manager-agentinstallation-directory/agent/logs/ trace.log • Device-Manager-agentinstallation-directory/agent/logs/ access.
Message ID Message Text Description maintenance information and contact the support center. KAIE20902-E An I/O error occurred during server execution. Cause A network error occurred while waiting for a connection. There might be a network error or a memory shortage. Action Make sure that there are no network errors or memory shortages. If the problem occurs frequently, collect maintenance information and contact the support center. KAIE20903-E An unexpected error occurred during server execution.
Message ID Message Text Description Action Correct the value for logger.MaxFileSize, and then restart the service. KAIE21703-W The property "propertyName" of value in the server configuration file is not valid. The default value will be used. Cause There is an error in the settings of the property file (server.properties). Action Check each value of the server.properties property and correct them if necessary.
Message ID Message Text Description be a memory shortage or an internal error. Action Make sure that there are no memory shortages, and then retry a forced termination of the service. If this does not resolve the problem, collect maintenance information and contact the support center. KAIE30505-E An error occurred during processing to start the service execution process. Cause The service execution process could not start because the environment is invalid.
KAIE60000 - KAIE69999 The following table describes messages KAIE60000 to KAIE69999, which are related to Device Manager Agent. Table 3-4 KAIE60000 - KAIE69999 (Messages Related to Device Manager Agent) Message ID KAIE62001-I Message Text HBsA Service is already running. Description Cause An attempt was made to start two or more HBsA services. Action Only one instance of HBsA Service can run on a system at any given time. KAIE62601-E Permission of HBsA Service was denied.
Message ID Message Text Description commands for network monitoring (such as netstat or ping). If there is no problem, restart the system and then re-install the program. If the problem persists, collect the maintenance information and contact the Support Center. KAIE62606-E An error occurred while starting Cause HBsA Service. An attempt to access the HBsA service registered in the Windows services has failed. Action Re-install the program.
Message ID Message Text Description Correct the value for server.agent.maxMemorySize, and then restart the HBsA service. KAIE65601-E The command was executed by Cause a user other than the The command was executed by a user administrator. Execute this other than the administrator. command as the administrator. Action Execute this command as the administrator. KAIE66007-I The Java path path was set in server.properties. Cause Action - KAIE66010-I The command ended successfully.
Message ID KAIE66605-E Message Text Setup of the firewall failed. [property-key] Description Cause The port number failed to be registered as a firewall exception. Action Manually register the port number as a firewall exception. KAIE66606-E Acquisition of the installation path failed. Cause Acquisition of the installation path failed. Action Reinstall the Device Manager agent. KAIE66607-E An internal error occurred. Cause Internal error.
Message ID Message Text Description Make sure that the file indicated in the message exists. If necessary, reinstall the Device Manager agent.
4 Messages with IDs Beginning with KAIF This chapter describes messages related to Global Link Manager.
KAIF10000 - KAIF29999 The following table describes messages KAIF10000 to KAIF29999, which are related to Global Link Manager Server. Table 4-1 KAIF10000 - KAIF29999 (Messages Output by Global Link Manager Server) Message ID 4-2 Message Text Cause Solution KAIF10000-I Startup processing for Hitachi Global Link Manager will now start. - - KAIF10001-I Hitachi Global Link Manager has started. - - KAIF10002-E An attempt to start Hitachi Global Link Manager has failed.
Message ID KAIF10007-E Message Text Cause Solution An attempt to stop the alert management function has failed. Another application might be using the SNMP port. KAIF10008-I : Begin. Parameter name. - - KAIF10009-I : End. Parameter name. - - KAIF10010-I Parameter name has been set. - KAIF10011-E An exception occurred. (details = Cause of Failure) This message shows error information. No action is required. KAIF10012-I The stack trace details for the exception was output.
Message ID Message Text Cause Solution in progress. Please wait a while, and then retry. KAIF10017-E An attempt to initialize Hitachi Global Link Manager has failed. An attempt to initialize Hitachi Collect the diagnostic Global Link Manager has failed. information and contact the Support Center. KAIF10018-E The initialization thread was interrupted. The initialization thread was interrupted. Collect the diagnostic information and contact the Support Center.
Message ID Message Text Cause The same value used for server.snmp.trap_ip_address was specified for the IP address. Solution KAIF10024-E The same value used for server.snmp.tr ap_ip_address was specified for the IP address. KAIF10025-E A multicast IP A multicast IP address was address was specified for the IP address. specified for the IP address. Specify a valid IP address. KAIF10026-E A broadcast IP A broadcast IP address was address was specified for the IP address.
Message ID 4-6 Message Text Cause Solution KAIF11002-E This platform is The command was executed on Contact the Support not supported. an platform not supported by Center. HGLM. KAIF11003-E I/O error: The error message returned from the I/O function An error occurred during I/O processing. KAIF11004-I File name was not found. The file you attempted to copy does not exist. KAIF11005-W The property There is no property file. file (server.propert ies) was not found.
Message ID Message Text Cause Solution KAIF11012-I Processing of the (Command name) command has started. (Time = Time, Directory = Directory) Processing of the command has started. - KAIF11013-I Processing of Processing of the command the (Command has ended. name) command has ended. (Time = Time) - KAIF11014-E I/O error: log file path = Log file path An error occurred during I/O processing. Make sure that the parent directory exists and that the user has write permission for the directory.
Message ID Message Text Cause Solution database version) 4-8 KAIF11106-I The database version has been updated to database version. The database version has been updated. KAIF11107-I Database update information = database update information The database has been updated. KAIF11108-I Database The update conditions of the processing will database could not be be skipped. satisfied. (cause = Cause of skipping) KAIF11109-E The invalid parameter is specified Error information.
Message ID Message Text Cause Solution KAIF11116-E The user does A user without administrator not have the permissions executed the permission utility. required to execute the utility for collecting HGLM CSV export information(hgl amexportcsv). Re-execute the utility as a member of the Administrators group. Re-execute the utility as a member of the Administrators group. KAIF11117-E The services of Hitachi Global Link Manager are stopped. Start the services and retry the operation.
Message ID Message Text Cause Solution = Cause of Failure) 4-10 KAIF20029-I Property Property Name which is not set is not set, Default value : Default Value to be set is set. - KAIF20030-I JavaVM total memory = total memory, available memory = available memory. - KAIF20031-E The path The path defined by the user is Make sure the settings specified in the not an absolute path. in the property file is server.properties file not an absolute are correct. path.
Message ID Message Text Cause Solution or is being refreshed automatically. Wait a while, and then reexecute the operation. KAIF20103-E The configuration information of Hitachi Global Link Manager does not match the host configuration information about the host on the HDLM agent. Refresh the target host, check the information, and then retry the operation. The configuration information of Hitachi Global Link Manager does not match the host configuration information about the host on the HDLM agent.
Message ID Message Text Cause Solution Please see the HDLM manual if the HDLM version is 5.8 or later and if the return code shows 1000-1999. KAIF20113-E An attempt to An error occurred while acquire path acquiring path information. information has failed. Make sure that HDLM and Hitachi Command Suite Common Agent Component are operating properly on the host. If the problem still persists, collect the diagnostic information and contact the Support Center.
Message ID Message Text Cause Solution version is 5.8 or later and if the return code shows 1000-1999. KAIF20117-E An attempt to An error occurred while acquire HDLM acquiring HDLM manager manager information. information has failed. Make sure that HDLM and Hitachi Command Suite Common Agent Component are operating properly on the host. If the problem still persists, collect the diagnostic information and contact the Support Center.
Message ID Message Text changed. Please refresh the window. Cause • Solution An attempt was made to delete a host not registered in the server. KAIF20122-E There is no The logged-in user does not access have permissions for the permission for specified host. the logged-in user for host (Not authenticated Host name) for operation. Check the permissions of the logged-in user.
Message ID Message Text Cause Solution information is invalid. KAIF20127-I The path status log was successfully stopped. (stopped host name = (Hostname),IP address of the stopped host = IP Address) - KAIF20128-E An attempt to An attempt to stop the path stop the path status log failed because of status log interrupt processing. failed. (stopped host name = Hostname, IP address of the stopped host = IP Address) To stop managing the host, remove the agent.
Message ID Message Text Cause Solution Agent Service Port) KAIF20134-E An attempt to add a host failed. (host = Host, remote port = Remote Port, agent service port = Agent Service Port, details = Cause of Failure) The host discovery processing failed for one or more of the following reasons. Perform the following action depending on the cause: 1. The logged-in user has no permissions for the specified operation. 1. Check the permissions of the logged-in user. 2.
Message ID Message Text Cause Solution KAIF20137-I The host was successfully deleted. - - KAIF20138-E An attempt to delete the host has failed. (details = Cause of Failure) An attempt to delete the host failed due to one of the following reasons: Perform the following action depending on the cause: 1. The logged-in user has no permissions for the specified operation. 1. Check the permissions of the logged-in user. 2. The host has already been deleted from Hitachi Global Link Manager. 2.
Message ID KAIF20144-E KAIF20145-E KAIF20146-E Cause Solution An attempt to acquire the host and information related to the host has failed. (details = Cause of Failure) Retrieval of host information failed due to the following reason: An attempt to acquire the multipath LU and related information has failed. (details = Cause of Failure) The attempt to acquire the multipath LU information failed because the host has already been deleted from Hitachi Global Link Manager. Refresh the window.
Message ID Message Text Cause Solution the entered host name is correct. (entered host name = entered host name ) KAIF20151-E When the name was resolved, an invalid IP address was acquired. (host name = Entered host name, IP address = Resolved IP address) The resolved IP address is Please check the IP invalid. The results of resolving address of the host. the specified host name was a following IP address: 127.0.0.1 or 0.0.0.0 KAIF20152-I Automatic refreshing of host information has started.
Message ID Message Text host, details = Cause of Failure) 2. Cause Solution An attempt to communicate with the agent failed. selected next time.) 2. Make sure that HDLM and Hitachi Command Suite Common Agent Component are operating properly on the host. If the problem still persists, collect the diagnostic information and contact the Support Center. 4-20 KAIF20156-I Automatic host refreshing ended.
Message ID Message Text Cause could not be updated. (host name = Host name, IP address = IP address of the host) Solution contact the Support Center. KAIF20161-E An attempt to delete the host has failed. Part of the host information could not be deleted. An error occurred during database processing. Re-execute the same operation. If the problem still persists, collect the diagnostic information and contact the Support Center.
Message ID Message Text Cause Solution ended. The hosts that sent alerts are subject to automatic refreshing. KAIF20168-E The hosts The number of managed hosts cannot be exceeds the maximum added because number. the number of managed hosts exceeds the maximum. KAIF20169-W The IP address used for the connection and the IP address acquired from Multipath software name are different.
Message ID KAIF20172-E Message Text Cause Solution information. (return code = Return code from Agent component) operating properly on the host. If the problem still persists, collect the diagnostic information and contact the Support Center. An attempt to When the acquisition of Path acquire path information from the Host is information has failed. failed.
Message ID Message Text Cause Solution please try again later. • Make sure that HDLM and Hitachi Command Suite Common Agent Component are operating properly on the host. If the problem still persists, collect the diagnostic information and contact the Support Center. 4-24 KAIF20175-W The IP address used for the connection and the IP address acquired from DMP are different.
Message ID Message Text Cause Solution KAIF20178-E An attempt to When the acquisition of HBA acquire HBA Controller information from the controller Host is failed. information has failed. (details = Cause of Failure) Make sure that HDLM and Hitachi Command Suite Common Agent Component are operating properly on the host. If the problem still persists, collect the diagnostic information and contact the Support Center.
Message ID Message Text KAIF20182-W The result of the host refresh and other processing, or the results of the host refresh Result of LDEV label acquisition: An attempt to acquire LDEV Labels partially succeeded. The HDvM IP addresses for which labels could not be acquired are: (The list of HDvM IP addresses for which LDEV information could not be acquired) Some LDEVs managed by HGLM could not be referenced from HDvM.
Message ID Message Text Cause Acquisition: The LDEV Labels could not be acquired. The HDvM IP address that could not accrued: (The list of HDvM IP addresses for which LDEV information could not be acquired) KAIF20185-W KAIF20186-E Solution • Using the HGLM account registered in HDvM, make sure that all the LDEVs managed by HGLM are included in the LDEVs that can be displayed from HDvM. After the above checks, if the host was being refreshed manually, refresh the host again.
Message ID Message Text Cause Solution After the above checks, wait for the acquisition of the LDEV labels to be performed at the next scheduled time. KAIF20187-E The LDEV Labels could not be acquired. Some LDEVs managed by HGLM could not be referenced from HDvM. Take the following action: • Using the HGLM account registered in HDvM, make sure that all the LDEVs managed by HGLM are included in the LDEVs that can be displayed from HDvM.
Message ID Message Text Cause Solution performed at the next scheduled time. KAIF20190-W An attempt to acquire LDEV Labels has partially succeeded. Some LDEVs managed by HGLM could not be referenced from HDvM. Take the following action: • Using the HGLM account registered in HDvM, make sure that all the LDEVs managed by HGLM are included in the LDEVs that can be displayed from HDvM. After the above checks, wait for the acquisition of the LDEV labels to be performed at the next scheduled time.
Message ID Message Text Cause database processing. 4-30 Solution collect the diagnostic information and contact the Support Center. KAIF20194-I An attempt to acquire LDEV labels was not executed because no LDEV needs a LDEV label. - - KAIF20195-W The result of the host refresh and other processing, or the results of the host refresh Result of LDEV label acquisition: The LDEV labels were acquired successfully. Refreshing the host caused a warning to occur.
Message ID Message Text Cause Hitachi Global Link Manager has stopped. Solution KAIF20198-W Processing will be aborted because an interruption occurred. KAIF20199-I HGLM SNMP HGLM SNMP Daemon stop Daemon is not processing has failed because stopped for the an interruption occurred. hosts : Hostname KAIF20200-E The license installed in the host is invalid. Install a valid license and try again.
Message ID Message Text Cause of the information of the path. (host name = Host name, IP address = IP address, path name = Pass name) 4-32 Solution manually and then retry the operation. KAIF20205-W Part of the path information is updated. (host name = Host name, IP address = IP address, path name = Pass name) Hitachi Global Link Manager Agent failed to retrieve some of path information because Multipath Software is not returning the information.
Message ID Message Text Cause • Setting up the HDLM environment • Configuring a multipath LU • Configuring an alert • Switching a path • Resetting I/O Count and I/O Errors The logged-in user does not have permissions for the specified host. Solution KAIF20211-E The logged-in user does not have permission for accessing the specified host. KAIF20212-E Value of The parameter specified specified exceeds the specified range. parameter (Parameter name) exceeds the range (Threshold) specified.
Message ID Message Text Cause Solution IP address or host name) Change their status alive. If the problem still persists, collect the diagnostic information and contact the Support Center. KAIF20216-I HDLM was successfully set up. (host name = Host name, IP address = IP address of the host) - KAIF20217-E An attempt to set up HDLM has failed.
Message ID Message Text Cause Solution KAIF20219-I The path(s) were successfully placed offline. (path info = Management ID for the path info, host name = Host name) - KAIF20220-E A significant error occurred in the previous multipath LU operation. A significant error occurred in the previous multipath LU operation. Retry the operation. KAIF20221-I Multipath LU configuration was successfully set.
Message ID Message Text Cause details = Cause 3. of Failure) Solution HDLM or Hitachi Command 3. Suite Common Agent Component may not be running properly on the host. Make sure that HDLM and Hitachi Command Suite Common Agent Component are operating properly on the host. If the problem still persists, collect the diagnostic information and contact the Support Center. KAIF20224-E An attempt to place the path(s) offline has failed.
Message ID Message Text Cause Solution information after the path was set to Online or Offline has failed. KAIF20228-W Path status was not changed to Online. It was changed to Online(S) or Online(D). (path info = Path info, host name = Host name, details = Details) - - KAIF20230-I Alert notification was successfully set. (host name = Host name, IP address = IP address of the Host) - KAIF20231-E An attempt to set alert notification has failed.
Message ID Message Text Cause Solution Host name, storage system = storage system) KAIF20233-E An attempt to configure the storage system failed. (host name = Host name , storage system = Storage system, details = Cause of failure) An attempt to configure the storage system failed because of one of the following reasons: Take the action given below that has the same number as the cause of the problem: 1. The host has already been deleted from Hitachi Global Link Manager. 1. Refresh the window.
Message ID Message Text Cause Solution KAIF20240-I The values for I/O Count and I/O Errors on the host have been successfully reset. (host name = Host name) - - KAIF20241-E An attempt to reset the values for I/O Count and I/O Errors has failed. (host name = Host name, details = Cause of Failure) I/O Count and I/O Errors failed Make sure that HDLM to be reset. and Hitachi Command Suite Common Agent Component are operating properly on the host.
Message ID Cause Solution KAIF20245-I The path(s) The Path Disable operation were ends in success. successfully placed Disabled. (path info = The name of the path, host name = Host name) - KAIF20246-E An attempt to An error occurred during acquire wizard database processing. information has failed. (details = details) Re-execute the same operation. An attempt to An error occurred during delete the database processing. wizard information has failed.
Message ID KAIF20251-E Message Text Acquisition of HP-UX multipath information failed. (return code = Return code from Agent component) Cause An error occurred while acquiring HP-UX multipath information. Solution Make sure that HDLM and Hitachi Command Suite Common Agent Component are operating properly on the host. If the problem still persists,To determine the cause and resolve the problem, detailed investigation is required.
Message ID KAIF20302-E KAIF20303-E KAIF20304-E KAIF20305-E KAIF20307-W 4-42 Message Text Cause Solution code from Agent component) version is 5.8 or later and if the return code shows 1000-1999. The load Since MSCS is installed in the balancing operation-target host, load setting is not balancing cannot be set. supported in an environment where MSCS is installed.
Message ID Message Text Cause information. See the HDLM manual if the HDLM version is 7.6 or later and the return code shows 1000-1999. To determine the cause and resolve the problem, detailed investigation is required. Contact the Support Center, who may ask you to collect troubleshooting information. (host name = Host name, return code = Return code from the agent) Solution problem, detailed investigation is required. Contact the Support Center, who may ask you to collect troubleshooting information.
Message ID Message Text Cause from Agent component) KAIF20321-E Please see the HDLM manual if the HDLM version is 5.8 or later and if the return code shows 1000-1999. A path cannot be found on the host. (return code = Return code from Agent component) There is no path specified on the host. KAIF20322-E The information does not match because the configuration information of the path on the host is not up to date.
Message ID Message Text Cause Solution Please see the HDLM manual if the HDLM version is 5.8 or later and if the return code shows 1000-1999. KAIF20341-E An attempt to place a path online has failed. (return code = Return code from Agent component) A failure occurred during online Check path status and processing of the path. re-execute the same operation. If the problem still persists, collect the diagnostic information and contact the Support Center.
Message ID KAIF20345-E KAIF20346-E KAIF20347-E KAIF20348-E 4-46 Message Text Cause An attempt to An error occurred while recover the accessing SCSI driver. path failed because an error occurred while accessing the SCSI driver. (return code = Return code from Agent component) Solution Please re-execute process. If the problem still persists, collect the diagnostic information and contact the Support Center. Please see the HDLM manual if the HDLM version is 5.
Message ID Message Text Cause (return code = Return code from Agent component) Solution and then retry the operation. If the problem still persists, collect the diagnostic information and contact the Support Center. Please see the HDLM manual if the HDLM version is 5.8 or later and if the return code shows 1000-1999. KAIF20349-W Path status was not changed to Online. It was changed to Online(S). (return code = Return code from Agent component) - - KAIF20350-W Path status was not changed to Online.
Message ID KAIF20362-W Message Text Cause Solution Offline(C). (return code = Return code from Agent component) diagnostic information and contact the Support Center. HDLM returned The batch that executes online a response processing has been during registered. execution of the offline processing for a path. Refresh the information for the specified object, and then check the status. (return code = Return code from Agent component) Refresh the host, and check the status of the path.
Message ID Message Text Cause Solution KAIF20380-E An internal error occurred in the HDLM agent. If the version of HDLM is 5.8 or later and the return code is 1000-1999, see the HDLM manual. (return code = Return code from Agent Component) An internal error occurred in the HDLM agent. To determine the cause and resolve the problem, detailed investigation is required. Collect maintenance information, and then contact the customer support center. KAIF20381-E An error occurred in the HDLM agent.
Message ID Message Text Cause HDLM agent. The HDLM manager is not running. Check whether the HDLM manager has started. (return code = Return code from Agent Component) KAIF20386-E KAIF20387-E 4-50 Solution return code is 1000-1999, see the HDLM manual. To determine the cause and resolve the problem, detailed investigation is required. Collect maintenance information, and then contact the customer support center. An error occurred in HDLM while setting load balancing for LUs.
Message ID Message Text Cause host, return code = Return code from Agent component) Solution If the problem still persists, collect the diagnostic information and contact the Support Center. Please see the HDLM manual if the HDLM version is 5.8 or later and if the return code shows 1000-1999. KAIF20391-E KAIF20392-E KAIF20393-E An error was detected while setting the alert.
Message ID KAIF20394-E Cause Solution An attempt to An attempt to disable the path disable the failed as it is the last Enabled path has failed, path for disk/LUN. as it is the last path to the disk/LUN (return code = Return code from Agent component) Check the path status and re-execute the same operation. An error An error occurred during occurred enable processing of the path. during the path enable operation.
Message ID Message Text Cause setting the alert. (IP address = IP address of the host, return code = Return code from Agent component) Solution Suite Common Agent Component are operating properly on the host. If the problem still persists, collect the diagnostic information and contact the Support Center. Please see the HDLM manual if the HDLM version is 5.8 or later and if the return code shows 1000-1999. KAIF20401-E KAIF20402-E An error was detected while setting the alert.
Message ID Message Text Cause notification has 1. failed. (host name = Host name, IP 2. address = IP address of the Host, details = 3. Cause of Failure) Solution The logged-in user has no permissions for the specified operation. 1. Check the permissions of the logged-in user. The host has already been deleted from Hitachi Global Link Manager. 2. Refresh the window. 3. Make sure that HDLM and Hitachi Command Suite Common Agent Component are operating properly on the host.
Message ID Message Text Cause Solution KAIF20408-E The default values for the alert notification settings could not be registered. (details = Cause of Failure) An error occurred when registering the default values for the alert notification. Restart Hitachi Global Link Manager. If the problem still persists, collect the diagnostic information and contact the Support Center. KAIF20409-E An attempt to acquire default values for the alert notification settings has failed.
Message ID KAIF20414-E Message Text An error occurred while registering the default alert settings information. Cause An error occurred when registering the default alert settings information. Solution Restart Hitachi Global Link Manager, and check whether the default alert settings information has been registered. If the problem still persists, collect the diagnostic information and contact the Support Center. KAIF20415-E The default alert settings information does not exist.
Message ID Message Text Cause Solution KAIF20420-E An error occurred during SNMP trap reception processing. (details = Cause) An error occurred during SNMP Contact the Support trap reception processing. Center. KAIF20421-I Actionable SNMP trap information was received. (details = Received SNMP trap) - KAIF20422-W Processing will now stop because an interruption occurred. (details = Cause) An interruption was detected during reception of SNMP trap information.
Message ID Message Text Cause Solution received. (SNMP trap information = Received SNMP trap) 4-58 KAIF20428-W Invalid alert information was received. (enterprise = Enterprise) The format of the acquired information is invalid. - KAIF20429-E An attempt to acquire the specified alert information has failed. (details = Cause of Failure) An attempt to acquire the alert information has failed. The logged-in user does not have permission to execute the operation.
Message ID Message Text Cause Solution after the path status was changed to Enabled (or) Disabled has failed. acquiring the host information from agent side has failed. re-execute the Path Enable/Path Disable operation again. KAIF20437-E The configuration of the E-mail address list has been changed. Please refresh the window. Processing using old information cannot continue because the E-mail address list has been changed.
Message ID KAIF20442-E KAIF20443-E KAIF20444-E KAIF20445-E 4-60 Message Text Cause An attempt to Processing failed because of add a resource one of the following reasons: group to E-mail 1. A problem occurred during address has HGLM server database failed. processing. An attempt to update the Email address has failed. An attempt to update the alert type of resource group(s) has failed. An attempt to delete the Email address has failed. 2. An E-mail address was deleted by another Web client. 3.
Message ID KAIF20446-E Message Text An attempt to delete the resource group(s) from E-mail address has failed. Cause 1. A problem occurred during HGLM server database processing. 2. An E-mail address was deleted by another Web client. Processing failed because of one of the following reasons: 1. A problem occurred during HGLM server database processing. 2. An E-mail address was deleted by another Web client. 3. A resource group was deleted by another Web client. Solution 1.
Message ID Message Text Cause KAIF20449-E An attempt to acquire E-mail summary information has failed. KAIF20450-E An attempt to Processing failed because of acquire E-mail one of the following reasons: resource group 1. A problem occurred during information has Hitachi Global Link failed. Manager server database processing. KAIF20451-E KAIF20452-E An attempt to acquire add resource group for E-mail has failed.
Message ID Message Text Cause Solution customer Support Center. 2. Update the information in the window. KAIF20453-E An attempt to acquire SMTP server configuration has failed. (details = details) Processing failed because a problem occurred during Hitachi Global Link Manager server database processing. Execute the same operation again. If the problem persists, collect maintenance information, and then contact the Support Center.
Message ID Message Text Cause sent time of E- • mail has failed. KAIF20459-E KAIF20460-I KAIF20461-E KAIF20462-E KAIF20463-E 4-64 The problem occurred while executing the processing of the data base of the Hitachi Global Link Manager server. An attempt to The factor that processing fails acquire the is shown below. modify E-mail • E-mail information was information has deleted by another Web failed. client. The size of the alert gathering queue is Number of alert queue entries.
Message ID Message Text Cause • KAIF20464-E KAIF20465-E KAIF20466-E The problem occurred while executing the processing of the data base of the Hitachi Global Link Manager server. Send E-mail The factor that processing fails process is shown below. interrupted • When the format of the Ebecause the mail address is invalid mailing address format is wrong. Send E-mail process interrupted, problem occurred during messaging the mail details. An exception occurred during E-mail send process.
Message ID Message Text Cause Solution • KAIF20467-E 4-66 Update information on the screen. An attempt to acquire E-mail address has failed. The factor that processing fails is shown below. KAIF20510-E The logged-in user does not have permission for accessing the specified resource. The logged-in user does not have permissions for the specified resource. Check the permissions of the logged-in user. KAIF20511-E The specified resources cannot be found in the list of managed resources.
Message ID Message Text Cause Solution KAIF20608-E An error occurred during license registration. The system environment, necessary for execution of license management, is invalid. An attempt to create a temporary file has failed. KAIF20609-E An error occurred while parsing license information. An error occurred while parsing Collect the diagnostic the file. information and contact the Support Center. KAIF20610-E This license key is either invalid or may be for another product.
Message ID 4-68 Message Text Cause Solution resource group has failed. (resource group name = Resource group name) persists, collect the diagnostic information and contact the Support Center. KAIF20706-E An attempt to The edited resource group register user could not be assigned to the information to logged-in user. the resource group has failed. (resource group name = Resource group name) Check the access permission of the logged-in user.
Message ID Message Text Cause Solution (user name = User name) KAIF20713-I createToken method was called. (value = Parameter) - - KAIF20714-I The createToken method was called back. (value = Parameter) - - KAIF20715-I The addResourceGr oup method was called. - KAIF20716-I The addResourceGr oup method was called back. - KAIF20717-I The assignResource Group method was called. - KAIF20718-I The assignResource Group method was called back.
Message ID Message Text Cause Solution oups method was called. 4-70 KAIF20724-I The getResourceGr oups method was called back. - - KAIF20725-I The getAccounts method was called. - - KAIF20726-I The getAccounts method was called back. - - KAIF20727-I The getUniqueKey method was called. - - KAIF20728-I The getUniqueKey method was called back. (return value = Parameter) - KAIF20729-I The getHSSOResou rceGroups method was called.
Message ID Message Text Cause Solution server administrator. KAIF20800-E KAIF20801-E KAIF20802-E KAIF20803-E An attempt to add a host group has failed. (details = Cause of Failure) Host group addition failed due to one of the following reasons: Perform the following action depending on the cause: 1. The host group has already been added. 1. Refresh the window. 2. The logged-in user has no permissions for the specified operation. 2. Check the permissions of the logged-in user.
Message ID Message Text Cause Solution The host information has already been deleted from the host group. 2. 4-72 The logged-in user has no permissions for the specified operation. KAIF20805-E The The host group has already configuration of been deleted. the host group list has been changed. Please refresh the window. Refresh the window. KAIF20806-E The host group name is invalid.
Message ID Message Text Cause Solution already existed. KAIF20811-E The The host group has already configuration of been deleted. the host group list has been changed. Please refresh the window. Refresh the window. KAIF20812-E The A host(s) might have already configuration of been deleted. the Resource name list has been changed. Please refresh the window. Refresh the window. KAIF20813-E The host group The host group name was not name length is specified, or exceeds 50 invalid. characters.
Message ID 4-74 Message Text Cause Solution has failed. (details = Cause of Failure) 1. The resource group may 1. have already been deleted. Refresh the window. 2. The logged-in user has no permissions for the specified operation. Check the permissions of the logged-in user. KAIF20903-W One or more host(s) are already registered in another resource group. One or more host(s) are already registered in another resource group. Refresh the window. KAIF20904-E The resource group name is invalid.
Message ID Message Text Cause Solution KAIF20910-E The The resource group no longer configuration of exists. the resource group list has been changed. Please refresh the window. Refresh the window. KAIF21002-I The report was created successfully. (host name = host name, report type = report type, start date = start date, end date = end date) - - KAIF21003-E An attempt to create the report has failed.
Message ID Message Text Cause Solution logs are not sequential. (host name = host name, start log ID of blank period = start log ID of blank period, end log ID of blank period = end log ID of blank period) 4-76 KAIF21007-W Inconsistent path availability information was acquired from HDLM. (host name = host name, status of last path = status of last path, path status log file = path status log) - - KAIF21008-W The size of the directory for the host exceeds the recommended limit.
Message ID Message Text created. (directory path = directory path) Cause permission, or a file with the same name already exists. Solution the file, and then move or delete the file. KAIF21012-E The path status The user does not have write log file cannot permission for the path status be deleted. log file. (file name = file name) Make sure the user has write permission for the path status log file. KAIF21013-E The time data The time data acquired from acquired from HDLM is invalid. HDLM is invalid.
Message ID Message Text Cause Solution path availability information acquired from HDLM. (Path Info = Path information, Event occurrence time = Event occurrence time, Log ID = Log ID) KAIF21020-E An error occurred during the creation of a path status log file. (details = path status log) An error occurred during the creation of a path status log file. Collect the diagnostic information and contact the Support Center.
Message ID Message Text Cause Solution deleted. (host name = host name, IP address = IP address, file name or directory name = file or directory name) • The user does not have write permission for the path status log file or its directory. • The path status log file is being accessed by another process. KAIF21025-W The path availability ratio could not be calculated because the path status log data is invalid. Please set the correct time on the Hitachi Global Link Manager server and the host.
Message ID Message Text Cause Solution invalid. (Path Info = Path information, Time = Time data acquired from HDLM) 4-80 KAIF21029-W The time the event occurred is invalid. This time was included in the path availability information acquired from HDLM. The time the event occurred is invalid. - KAIF21100-I The scheduled network scan will now start.
Message ID Message Text Cause Solution number of hosts registered = number of hosts registered, number of hosts where an error occurred = number of hosts where an error occurred, number of hosts where a warning occurred = number of hosts where a warning occurred, scan ID = scan ID) KAIF21102-I The network scan will now start.
Message ID Message Text Cause Solution hosts registered = number of hosts registered, number of hosts where an error occurred = number of hosts where an error occurred, number of hosts where a warning occurred = number of hosts where a warning occurred, scan ID = scan ID) KAIF21104-E The entered information for performing the network scan is invalid. The entered information is invalid. The possible causes are as follows: • The scan ID is not specified.
Message ID Message Text Cause KAIF21106-E The network scan cannot be performed. The server is busy. Please wait a while, and then try again. KAIF21107-E A network scan is already being performed for the same IP address range and port numbers. A network scan is already being performed for the same IP address range and port numbers. - KAIF21108-E An attempt to An attempt to acquire the acquire the operation information has operation failed. information has failed.
Message ID 4-84 Message Text Cause Solution KAIF21111-E The same schedule is already registered. The same schedule is already registered. Make sure the schedule value is correct, and then try again. KAIF21112-E The specified schedule cannot be found. The schedule might have been deleted. Refresh the window, and then try again. KAIF21113-I The specified host is already registered. (IP address = IP address) - - KAIF21114-I An attempt to connect to the hosts has failed.
Message ID Message Text Cause details = details) Solution the host. If the problem still persists, collect the diagnostic information and contact the Support Center. KAIF21118-W Processing has stopped because an interruption occurred. Hitachi Global Link Manager might have stopped. - KAIF21119-I The scheduled network scan has stopped. Hitachi Global Link Manager might have stopped. - KAIF21120-I Initial synchronous processing has failed.
Message ID Message Text Cause Solution port = agent service port, scan ID = scan ID) 4-86 KAIF21123-I The history of scheduled network scans was deleted. (scheduled time = scheduled time, starting IP address = starting IP address, ending IP address = ending IP address, remote port = remote port, agent service port = agent service port, scan ID = scan ID) - - KAIF21124-I The history of user's network scans was deleted.
Message ID Message Text Cause Solution errors error(s) occurred. KAIF21127-W The network Hitachi Global Link Manager scan was might have stopped. aborted and no hosts were added. - KAIF21128-W The network Hitachi Global Link Manager scan was might have stopped. aborted. number of the added hosts host(s) were added. number of the warnings warning(s) occurred. number of the errors error(s) occurred.
Message ID Message Text Cause Solution scan was exceeded. (scheduled time = scheduled time, starting IP address = starting IP address, ending IP address = ending IP address, remote port = remote port, agent service port = agent service port, scan ID = scan ID) 4-88 KAIF21133-E The network scan was aborted because the maximum number of hosts that can be processed by the network scan was exceeded.
Message ID Message Text Cause Solution (scheduled time = scheduled time, starting IP address = starting IP address, ending IP address = ending IP address, remote port = remote port, agent service port = agent service port, scan ID = scan ID) KAIF21136-E The scheduled network scan was aborted because an error occurred.
Message ID Message Text Cause Solution remote port = remote port, agent service port = agent service port, scan ID = scan ID, details = details) KAIF21138-E An attempt to add the schedule has failed. (details = Cause of Failure) An attempt to add the schedule Perform the following failed due to one of the action depending on following reasons: the cause: 1. The maximum number of schedules that can be registered was exceeded. 2. The same schedule is already registered. 3.
Message ID Message Text Cause Solution and contact the Support Center. KAIF21140-E KAIF21141-E An attempt to delete the schedule has failed. (details = Cause of Failure) An attempt to get the schedule has failed. (details = Cause of Failure) An attempt to delete the schedule failed due to one of the following reasons: Perform the following action depending on the cause: 1. The specified schedule cannot be found. The schedule might have been deleted. 1. Refresh the window, and then try again.
Message ID Message Text Cause Solution exceeds the maximum. KAIF21145-E A network scan The number of managed hosts was aborted exceeds the maximum because the number. number of managed hosts exceeds the maximum. Delete unnecessary hosts. KAIF21146-E A network scan The number of managed hosts was aborted exceeds the maximum because the number. number of managed hosts exceeds the maximum. Delete unnecessary hosts, and then try again.
Message ID Message Text Cause Solution Number of lost paths) KAIF21400-I Automatic acquisition of the LDEV label was not performed, because manual acquisition of the LDEV label was in progress. - - KAIF21401-W An attempt to manually acquire LDEV labels was not executed because automatic acquisition is in progress. An attempt to manually acquire LDEV labels was not executed because automatic acquisition is in progress.
Message ID Message Text Cause Solution obtained from HDvM(Storage Array,LogicalU nit,LDEV ID) does not match with the information in HGLM-DB. 4-94 KAIF21406-W Invalid value The user entered an invalid input value value for the property. specified for property property value. LDEV Label acquisition will not be performed from this target. Enter a valid IP Address for the property and re-start the HGLM services.
Message ID Message Text Cause Solution acquisition will not be performed. KAIF21411-E The version of the HDvM server to do the LDEV label acquisition is invalid. - KAIF22100-E An agent operation timed out. Change the configuration file of HGLM server by referring to the manual. - KAIF22101-E An error occurred while accessing the agent. Make sure that HDLM and Hitachi Command Suite Common Agent Component are operating properly on the host. Then retry the operation.
Message ID Message Text Cause Solution operating properly on the host. Then, retry the operation. If the problem still persists, collect the diagnostic information and contact the Support Center. KAIF22105-E The information acquired from the agent is invalid. The information acquired from the agent is invalid. Make sure that HDLM and Hitachi Command Suite Common Agent Component are operating properly on the host. Then, retry the operation.
Message ID Message Text Cause Solution operating properly on the host. If the problem still persists, collect the diagnostic information and contact the Support Center. KAIF22109-E An error occurred while connecting to the agent. (details = Cause of Failure) HDLM or Hitachi Command Suite Common Agent Component may not be running properly on the host. Make sure that HDLM and Hitachi Command Suite Common Agent Component are operating properly on the host.
Message ID Message Text Cause has failed. Retry the operation. 4-98 Solution If the problem still persists, collect the diagnostic information and contact the Support Center. KAIF22117-I An XML response was received from the agent. (XML response = XML response) - - KAIF22118-I The HDvM API (The name of the API that was called) was called. - - KAIF22119-I The HDvM API (he name of the API that was called back.) was called back. - - KAIF22120-I An XML request was sent to the HDvM server.
Message ID Message Text Cause Solution Management Client) KAIF22130-E An attempt to communicate with the Hitachi Command Suite Common Agent Component has failed. Open processing failed due to a If the Hitachi protocol of the Hitachi Command Suite Command Suite Common Common Agent Agent Component. Component is being used on the target host, make sure that the agent is operating properly. If the problem still persists, collect the diagnostic information and contact the Support Center.
Message ID Message Text Cause Solution and contact the Support Center. KAIF22134-E An attempt to An error occurred while obtain host acquiring host information. information has failed. (return code = Return code from Agent component) Make sure that HDLM and Hitachi Command Suite Common Agent Component are operating properly on the host. If the problem still persists, collect the diagnostic information and contact the Support Center. Please see the HDLM manual if the HDLM version is 5.
Message ID Message Text Cause failed. (return code = Return code from Agent component) Solution operating properly on the host. If the problem still persists, collect the diagnostic information and contact the Support Center. Please see the HDLM manual if the HDLM version is 5.8 or later and if the return code shows 1000-1999. KAIF22138-E An attempt to An error occurred while obtain HDLM acquiring HDLM information. information has failed.
Message ID Message Text Cause address for the Agent service port. If using a Device Manager agent, specify the correct connection port. Solution target host, make sure that the agent is operating properly. If the problem still persists, collect the diagnostic information and contact the Support Center. KAIF22141-I An attempt to open the specified port failed. An attempt will now be made to connect using the default port. (port number = default port) Processing to open the specified port failed.
Message ID Message Text Cause Solution KAIF22144-E HTTP An error occurred while Check the Username authentication communicating with the Device and Password used for failed. The Manager. Device Manager username/ communication and password perform the LDEV provided for Label acquisition again HDvM refreshing host or wait communication for the LDEV Label was invalid. acquisition to be (HDvM : IP performed at the next address of the scheduled time.
Message ID Message Text Cause Solution added, delete it once. 4-104 KAIF22149-E An attempt to connect to the VMware host from the Agent failed. Check whether connection to the VMware host is possible from the Remote Management Client. (return code = Return code from Agent Component) To determine the cause and resolve the problem, detailed investigation is required. Collect maintenance information, and then contact the customer support center. If the return code is 1000-1999, see the HDLM manual.
Message ID KAIF22153-I Message Text Cause Solution Agent Remote Management Client Component of host. the Remote Management Client failed. To add a VMware host, specify the IP address or host name of the Remote Management Client for the Agent service port. If the VMware host has already been added, delete it once. If using a Device Manager agent, specify the correct connection port.
Message ID Message Text Cause Solution Client host = IP address or host name of the Remote Management Client) 4-106 KAIF22200-E An attempt to initialize Hitachi Global Link Manager has failed. (details = Cause of Failure) An attempt to initialize Hitachi Collect the diagnostic Global Link Manager has failed. information and contact the Support Center. KAIF22201-E An attempt to initialize Hitachi Global Link Manager has failed.
Message ID Message Text Cause Solution list has been changed. Please refresh the window. KAIF22300-E An attempt to connect the database has failed. An attempt to connect to the database has failed. The processing to stop Hitachi Global Link Manager might be in progress. Retry will only be attempted for the specified number of retries. If the processing to stop Hitachi Global Link Manager is in progress, no action is required. KAIF22301-E The database could not be connected.
Message ID Cause Solution KAIF22306-E An attempt to A time-out occurred while execute the waiting for lock acquisition. transaction has failed. Retry will only be attempted for the specified number of transaction retries. KAIF22307-E An error occurred during database processing. If the processing to stop Hitachi Global Link Manager is in progress, no action is required. In other cases, retry the operation.
Message ID Message Text Cause Solution contact the Support Center. KAIF22314-E The The resource has already been configuration of deleted. the Resource name list has been changed. Please refresh the window. Refresh the window, and then check whether the information exists. KAIF22315-E The Another user might have configuration of already deleted the resource. the Resource name list has been changed. Please refresh the window.
Message ID 4-110 Message Text Cause Solution during sort processing. problem still persists, collect the diagnostic information and contact the Support Center. KAIF22322-E An error The database is not operating occurred by correctly. reconnecting to the database. Collect the diagnostic information and contact the Support Center. KAIF22323-E An error An error occurred while occurred in reading the file of the reconnecting to database. the database.
Message ID Message Text Cause Solution KAIF22407-E An error occurred in the blank page collection thread while accessing user information. (details = Cause of Failure) Blank page recovery ended abnormally due to an error. Collect the diagnostic information and contact the Support Center. KAIF22500-I Maximum value of the queue was set for the maximum value of the queue. - - KAIF22501-I The size of the current queue is Queue size.
Message ID Message Text Cause Solution acquire the task. 4-112 KAIF22508-I The thread (Thread management number) will now execute the task. - - KAIF22509-E An unrecoverable error occurred in the thread (Thread management number). An internal error occurred. Collect the diagnostic information and contact the Support Center. KAIF22510-I The thread (Thread management number) will now release the task. - - KAIF22511-I The queue size was set to Queue size.
Message ID Message Text Cause Solution KAIF22604-I The lock for the host (Name of the host for which the lock will be acquired) will now be acquired. - KAIF22605-I Operation available period is set to Operation available period minutes. - KAIF22606-I The operation that has the command ID (Command ID) is currently executing.
Message ID Message Text Cause Solution in this operation. 4-114 KAIF22610-I A total of Number of finished operations tasks have finished for operation (operation name). Another number of unfinished tasks tasks are yet to be finished for this operation. - KAIF22611-I The lock for the host (Name of the host for which the lock will be released) will now be released. - KAIF22613-E The operation cannot find the command ID (Command ID). The server is busy. Wait a while, and then try again.
Message ID Message Text Cause information has failed. (details = Cause of Failure) Solution collect the diagnostic information and contact the Support Center. KAIF22617-E An attempt to restore the message failed while the operation results information was being acquired. (message ID = message ID) An attempt to restore the message failed while the operation results information was being acquired.
Message ID Message Text Cause Solution = command ID) 4-116 KAIF22624-E Invalid Invalid operation information operation has been registered. information has been registered. (task type = task type) Collect the diagnostic information and contact the Support Center. KAIF22625-E Invalid Invalid operation information operation has been registered. information has been registered. (parameter type = parameter type) Collect the diagnostic information and contact the Support Center.
Message ID Message Text Cause Solution KAIF24100-W The property file (Properties filename) could not be opened. KAIF24101-E The value for An error occurred while loading Correct the value of the property a property. the property according (Property to the detailed name) is information. invalid. (details = Cause of Failure) KAIF24102-E Startup processing failed while loading a property. An error occurred while loading Correct the value of a property. the property and then retry.
Message ID Message Text Cause Solution Suite-CommonComponent \template Recover to: installation-folder-forHitachi-CommandSuite-CommonComponent \inst KAIF24201-W The file is not found. (filename) A File-Name file not found. If you do not need to display the LDEV label information, no action is required. To display the LDEV labels, recover the StorageArray.csv file from the following location and restart Global Link Manager.
Message ID Message Text Cause Solution node(s) may be deleted or modified. KAIF30006-E An error occurred in the tree. An internal error has occurred. Refresh the screen. KAIF30007-E An error occurred in encoding. An internal error has occurred. Refresh the screen. KAIF30008-E An error occurred during writing in the file. A file write operation failed or was interrupted. Please try again. KAIF30009-E An error occurred during redirecting to help file. An internal error has occurred.
Message ID Message Text Cause Solution KAIF30103-E Enter the password. The password is not entered. Enter the password. KAIF30104-E Communication with an external authentication server has failed. A communication error occurred during an attempt to authenticate a user on an external authentication server. Perform one of the following procedures: For LDAP: • By using the host, port, and protocol set in "exauth.
Message ID Message Text Cause Solution status of the network. • By using the hcmdsradiussecret command, check that the information for the server names specified in the "auth.server.name " attribute in "exauth.properties " is registered. • If you cannot resolve the problem, collect maintenance information, and then contact the Support Center. KAIF30200-I The emergency license will expire in Remaining days to expire days on Expiration date. Register a permanent license before the license expires.
Message ID Message Text Cause Solution or a product license key file. 4-122 KAIF30206-E The temporary license has expired. The temporary license expired. Register a permanent license. KAIF30207-E The temporary license has expired. Enter a product license key or a product license key file. The temporary license expired. Register a permanent license. KAIF30208-E The number of registered hosts exceeds the number of hosts specified by the license.
Message ID Message Text Cause - Solution KAIF30605-E Alert settings cannot be configured because a path is not connected to the host. Connect a path, and then refresh the host. KAIF30606-E Host(s) addition failed. The specified host(s) The specified host(s) already added. are already added. KAIF30607-E Value Value which is incorrect is not in the valid integer format at the location.
Message ID Message Text Cause Solution configure HDLM settings. 4-124 KAIF30617-E The selected hosts include both VMware hosts and non-VMware hosts. Select only one type of host, and then retry the operation. The selected hosts include both VMware hosts and non-VMware hosts. Select only HDLM hosts or only VMware hosts, and then retry the operation. KAIF30618-E The value Specified value is not in the correct format.
Message ID Message Text Cause Solution KAIF30900-E One or more resource group(s) out of the selected may be already deleted. Refresh the screen. One or more resource group(s) out of the selected may be already deleted. Refresh the screen and then try again. KAIF30901-E The selected resource group may be already deleted. Refresh the screen. The selected resource group may be already deleted. Refresh the screen and then try again.
Message ID 4-126 Message Text Cause Solution KAIF31201-E A file I/O error An I/O error occurred occurred during writing during writing of the in the path status log path status log file. file. (detailed info = Cause of Failure) Please confirm the path status log save directory set in the properties file. KAIF31202-I Path availability information for the specified period does not exist.
Message ID Message Text Cause Solution KAIF31304-E The required license key is missing from the license key file. This license key file may be for a different product. The required license key is missing from the license key file. This license key file may be for a different product. Specify a valid license key or file. KAIF32000-E Line feed codes, tab codes, and the following characters cannot be used in the name:\\ / , ; : ? * " < >|. The name contains an invalid character.
Message ID 4-128 Message Text Cause Solution KAIF32009-E Specify the start IP address and the end IP address that are same IP address version. - KAIF32010-E The value entered for the Agent service port is invalid. Enter a port number by using numerical digits. To add a VMware host, perform a scan immediately. - See the entry window or the Help, and enter an appropriate value. KAIF32011-E The value entered for the Agent service port is invalid. Enter a port number by using numerical digits.
Message ID Message Text Cause The specified storage system name is too long. Solution KAIF32117-E The storage system name must be from 1 to 52 characters in length. KAIF32118-E The CHA must be from The specified CHA port 1 to 2 characters in is too long. length. KAIF32119-E The multipath LU must The specified multipath Specify a multipath LU be from 1 to 256 LU is too long. from 1 to 256 characters in length. characters in length. KAIF32120-E The HBA must be from 1 to 10 characters in length.
Message ID 4-130 Message Text Cause Solution KAIF32132-E Enter the user ID. The User ID was not entered. Enter the user ID. KAIF32134-E All the available resource groups are already added to this E-mail address. All the available resource groups are already added to this E-mail address. Create new resource groups. KAIF32135-E One or more E-mail address(es) out of the selected may be already deleted. Refresh the screen.
Message ID Message Text Cause Solution when-monitoringintermittent-errors. KAIF32605-E The specified log file The log file size has size is outside the valid not been entered range. correctly. Specify a log file size within the range displayed in the window. KAIF32606-E The specified number of log files is outside the valid range. KAIF32607-E The specified trace file The trace file size has size is outside the valid not been entered range. correctly.
Message ID Message Text Cause Solution execute the report again. KAIF32704-E The end date must be set to before the last update time of every HDLM host version 5.9 or later. An invalid report date was specified. Specify a valid report date. KAIF40000 - KAIF49999 The following table describes messages KAIF40000 to KAIF49999, which are related to Global Link Manager Installer.
Message ID Message Text Cause Solution KAIF40006-E Removal cannot be performed because not all of the Hitachi Command Suite Common Component services have stopped. A Hitachi Command Suite Common Component service is running. Stop all of the Hitachi Command Suite Common Component services, and then try again. KAIF40007-E Installation cannot be performed because the Hitachi Command Suite Common Component version is too old.
Message ID Message Text Cause 2. The storage media 2. might be defective. 3. A disk error might have occurred while generating the property file. 3. Replace the storage media of the installation package. Make sure that the installation target disk is normal. KAIF40011-E An attempt to install Hitachi Command Suite Common Component has failed. An attempt to install Hitachi Command Suite Common Component has failed. Restart the system, and then re-install Hitachi Global Link Manager.
Message ID Message Text Cause Solution setup destination of the start menu. 2. The OS might have a problem. the setup destination of the start menu. 2. Acquire the diagnostic information of Hitachi Global Link Manager, and then contact the Support Center. KAIF40016-E An attempt to register the log collection command has failed. Hitachi Command Suite Common Component might not have been installed correctly.
Message ID 4-136 Message Text Cause Solution Command Suite Common Component process. Suite Common Component, and then contact the Support Center. The list of registered services can be acquired by selecting [Control Panel], [Management Tools], [Services], and then executing [Export list] from the [Operations] menu. KAIF40021-E An attempt to register the Web application has failed. Hitachi Command Suite Common Component might not have been installed correctly.
Message ID KAIF40025-E Message Text Cause An attempt to delete a Possible causes are as Hitachi Global Link follows: Manager file has failed. 1. Access permissions might be lacking for the installation destination disk. 2. An error might have occurred on the disk. Solution Perform the following action depending on the cause: 1. Make sure that you have access permissions for the installation destination disk. 2. Make sure that the installation target disk is normal.
Message ID Cause Solution KAIF40030-E An attempt to delete the alias for the storage location of the manual contents has failed. Hitachi Command Suite Common Component might not have been installed correctly. Acquire the diagnostic information of Hitachi Global Link Manager and Hitachi Command Suite Common Component, and then contact the Support Center. KAIF40031-E An attempt to unregister the Web application has failed.
Message ID Message Text Cause Solution KAIF40035-E An attempt to unregister use of Hitachi Command Suite Common Component has failed. Hitachi Command Suite Common Component might not have been installed correctly. KAIF40036-E An attempt to delete the installation folder has failed. The installation folder, Restart the system, or a folder or file in the and then delete the installation folder, is folder. being used by another application.
Message ID Message Text Cause 2. An error might have occurred on the disk. Solution the installation destination. 2. Make sure that the installation target disk is normal. If installation or removal ended normally, no action is required. KAIF40042-W KAIF40043-E KAIF40044-E An attempt to delete service pack information has failed. An attempt to back up the property files has failed. An attempt to merge the property files has failed.
Message ID KAIF40046-E Message Text Cause Solution An attempt to initialize the Hitachi Global Link Manager database file has failed. Possible causes are as follows: Acquire the diagnostic information of Hitachi Global Link Manager and Hitachi Command Suite Common Component, and then contact the Support Center. • An error might have occurred on the database file. • Hitachi Command Suite Common Component might not have been installed correctly.
Message ID Message Text Cause KAIF40052-E The specification of the installation folder is mandatory. Please specify the installation folder. In the window for setting the installation folder, nothing has been entered in the field. Enter a valid installation folder. KAIF40053-E Hitachi Global Link Manager installation requires at least 1.5 GB of free space. The current free space is insufficient. The specified path does not have the free space required for installation.
Message ID Message Text Cause and the space character. Solution reserved by the OS. KAIF40058-E The path name for storing the Hitachi Global Link Manager database file is mandatory. Please specify the path name. In the window for setting the storage location of the Hitachi Global Link Manager database file, there is no entry for the path name. Enter a valid path name for storing the database file.
Message ID Message Text Cause Solution space character was entered for the first or last character. KAIF40063-E An invalid character or a reserved word is specified in the path name of the Hitachi Global Link Manager database file. Possible causes are as follows: 1. Only the following characters can be used: A to Z, a to z, 0 to 9, period (.), underscore (_), and the space character. KAIF40064-E The HiRDB/ EmbeddedEdition _HD0 service is not operating. 2. A field in the window used to 1.
Message ID Message Text Cause Solution Installation will now stop. To install Hitachi Global Link Manager, change Hitachi Tuning Manager to another configuration or remove it. KAIF40067-W The file name file was not found. The information on the property file cannot be inherited, because the file name file was not found. After installation, recover the file name file information by referring to the "Global Link Manager Installation and Configuration Guide". KAIF40068-E The IP address is invalid.
Message ID KAIF40075-I Message Text You have changed the port number for receiving SNMP traps to a value other than the default value. Are you sure you want to set the following value? Cause Solution The port number for receiving SNMP traps was changed to a value other than the default value. Make sure the port number is the one you want to use for receiving SNMP traps, and then follow the instructions given in the message.
Message ID Message Text Cause Solution contact the Support Center. KAIF40080-E Preparation for database creation has failed. Preparation for database creation has failed. Acquire the diagnostic information of Hitachi Global Link Manager, and then contact the Support Center. KAIF40081-E Preparation for a database update has failed. Preparation for a database update has failed. Acquire the diagnostic information of Hitachi Global Link Manager, and then contact the Support Center.
Message ID 4-148 Message Text Cause Solution KAIF40089-E The path name of the Hitachi Global Link Manager database file contains an invalid period character. A period character has been entered at the beginning or end of the installation folder name specified in the path. Delete any period characters from the beginning or end of the installation folder name. KAIF40090-E The IP address or host name is invalid.
Message ID Message Text Cause Solution KAIF40093-E Only the drive letter is specified for the path name of the Hitachi Global Link Manager database file. The Hitachi Global Link Enter an absolute path Manager database file including the folder cannot be created in a name. drive's root directory. KAIF40094-E An attempt to update the Hitachi Global Link Manager database file has failed. An attempt to update the Hitachi Global Link Manager database file failed during the upgrade installation.
Message ID KAIF40100-E Message Text Cause The services of Hitachi Command Suite products are not stopped. The services of Hitachi Command Suite products are not stopped. Stop the services according to the procedure used to build an environment for a cluster configuration, and then click the Next button again. An attempt to stop the services of Hitachi Command Suite products has failed. Click the Next button again, or stop the services manually.
Message ID Message Text Cause Solution KAIF40105-E You cannot select this destination folder. You cannot select this destination folder. Specify another folder. KAIF40106-E An error occurred while processing the command. (Return Code) An error occurred while processing the command. Acquire the diagnostic information of Hitachi Global Link Manager and Hitachi Command Suite Common Component, and then contact the Support Center. KAIF40110-I HGLM installation will now start.
Message ID 4-152 Message Text Cause Solution KAIF40122-W An installation information settings file of an unsupported product version is specified. (hglmversion= The HGLM version of the specified installation information settings file(character string)) The specified installation information settings file is not supported by this version of HGLM. Specify the installation information settings file of this version or an earlier version of HGLM, and then try again.
Message ID Message Text Cause Solution Specify a path on another disk for the folder where the database files are to be stored, or change the folder where the program is to be installed. KAIF40131-W An attempt to delete the removal information from the registry failed. The OS might have a problem. Acquire the diagnostic information of Hitachi Global Link Manager, and then contact the Support Center. KAIF40140-E The following paths cannot be specified. Specify a different path.
Message ID Message Text Cause contains an invalid space character. backup storage folder, a space character was entered for the first or last character in the field. 2. 4-154 A space character was entered as the first or last character of a folder name in the entered path. Solution 1. Delete any space characters from the beginning or end of the path name. 2. Delete any space characters from the beginning or end of the path name.
Message ID Message Text Cause Solution contact customer support. KAIF40148-E The path name ofthe data backup storage folder contains an invalid period character. A period character has been entered at the beginning or end of the data backup storage folder name specified in the path. Delete any period characters from the beginning or end of the data backup storage folder. KAIF40149-E The specified folder cannot be used. The drive does not exist. Specify a valid drive path.
Message ID Message Text • Tiered Storage Manager • Replication Manager • Tuning Manager • Compute Systems Manager Cause Solution KAIF40160-E The HiRDB/ EmbeddedEdition _HD1 service is not operating. Start it, and then try again. The HiRDB/ EmbeddedEdition _HD1 service has stopped. After HiRDB/ EmbeddedEdition _HD1 starts and the Hitachi Command Suite Common Component service stops, try again. KAIF40161-E An attempt to check the status of the HiRDB/ EmbeddedEdition _HD1 service has failed.
Message ID Message Text Meaning (command ID = Command ID, message = Details) KAIF50202-I The operation (Operation name) was successful. (command ID = Command ID) The processing of Operation name was successful. KAIF50203-W The operation (Operation name) ended partially in failure. (command ID = Command ID, number of failures = Number of operation result failures) Some of the processing for Operation name failed. KAIF50204-E The operation (Operation name) failed.
Message ID 4-158 Message Text KAIF60011-I HGLM SNMP Daemon has already started. KAIF60012-I HGLM SNMP Daemon has stopped successfully. KAIF60013-I HGLM SNMP Daemon has already stopped. KAIF60016-E An attempt to acquire install directory of HBsA has failed. Check if HBsA is installed. KAIF60017-I Install directory of HGLM Agent was acquired successfully. install directory = installation-directory KAIF60018-E An attempt to acquire install directory of HGLM Agent has failed.
Message ID Message Text KAIF60033-I Processing to parse the result of the command of Multipath Software will now start. Multipath Software = Multipath-Software-name, command = command-name KAIF60034-I Processing to parse the result of the command of Multipath Software was succeeded. Multipath Software = Multipath-Software-name, command = command-name KAIF60035-E A necessary property does not exist at the result of the command of Multipath Software.
Message ID 4-160 Message Text KAIF60053-W Invalid argument is passed as last parameter for the command, which resulted in command execution error. Process is continued by acquiring information of other disks. KAIF60054-W There is no array name in the command output. Check if the environment is proper or not. KAIF60055-W Failed to acquire path I/O performance information. Check if the environment is correct and the paths are connected. KAIF60056-I Execution of command Command-Name has started.
Message ID Message Text KAIF60106-I Startup processing for HGLM SNMP Daemon will now start. KAIF60107-I HGLM SNMP Daemon has started successfully. pid = pid-of-HGLMSNMP-daemon KAIF60108-I HGLM SNMP Daemon has already started. pid = pid-of-HGLM-SNMPdaemon KAIF60109-I The processing to stop HGLM SNMP Daemon will now start. pid = pidof-the-HGLM-SNMP-daemon KAIF60110-I HGLM SNMP Daemon has stopped successfully. pid = pid-of-the-HGLMSNMP-daemon KAIF60111-W HGLM SNMP Daemon has already stopped.
Message ID 4-162 Message Text KAIF60131-E An error for which processing cannot continue occurred. Details = (details) KAIF60132-I Alert information was received from Multipath Software. Multipath Software = Multipath-Software-name, alert information = receivedalert-information KAIF60133-I Processing to parse the alert information will now start.
Message ID Message Text KAIF60158-W The multipath command output a warning. (command = Commandname, message = warning) KAIF60159-E An unexpected error occurred. Details = Details KAIF60160-I method-name method begin. KAIF60161-I method-name method end. KAIF60162-E API-name API failed with the return code = error-code. Please refer the MSDN site for the detailed cause and description of the error. KAIF60163-E An attempt to read registry for obtaining Registry-Key path failed.
Message ID Message Text KAIF60512-I Process to collect information of HBsA will start now. KAIF60513-I Process to collect information of HBsA was executed. KAIF60514-I Process to collect information of VxVM will start now. KAIF60515-I Process to collect information of VxVM was executed. KAIF60516-E No archive files were created because no files were collected by HGLM command (hglmagtgetras).
Message ID Message Text number Delete the description of the root directory in the file-namespecified-in-the-"-f"-parameter file. HGLM command (hglmagtgetras) continues the processing without collecting the root directory. KAIF60530-W Two or more file/directory are specified in one line in the file for defining the information to be collected.
Message ID Message Text KAIF60540-I Collection of diagnostic information from the HGLM Agent will now start. KAIF60541-I Collection of diagnostic information from the HGLM Agent will now end. KAIF60542-E Collection of diagnostic information from the HGLM Agent failed. (Reason : Internal Error Occurred) KAIF60543-E Too many parameter has been specified. KAIF60544-E User does not have sufficient privilege to execute the command. KAIF60545-W The directory that specified is already exist.
Table 4-6 KAIF62000 - KAIF62999 (Messages Output by Global Link Manager Agent Installer) Message ID Message Text Cause Solution KAIF62000-I HGLM Agent Hitachi Global Link Installation-or-removal Manager Agent has started. installation or removal has started. - KAIF62001-W An error occurred during The Installation-orremoval, but the Installation-or-removal still completed. An error occurred during the installation or removal, but the installation or removal still finished.
Message ID KAIF62010-I Message Text Cause specified-duringinstallation-orremoval2... during installation or removal. Windows: System information is displayed. Execution-resultof-systeminfo.exe Solution - Solaris/HP-UX: Execution-resultof-"uname -a" 4-168 KAIF62011-E The processing The processing ended (function-name) ended abnormally. abnormally. Please confirm the error message that was output before this message, and follow the action of the error message.
Message ID Message Text Cause Solution parameter of the installation command. KAIF62106-E An invalid directory was specified for the A-parameter-name parameter. An invalid directory was specified for the A-parameter-name parameter of the installation command. Make sure that the specified folder name or directory name satisfies the following conditions: • The absolute path length is within 64 characters.
Message ID Message Text Cause Solution be installed in a nonglobal zone. KAIF62203-E A prerequisite program, JDK and JRE, is not installed in the system. A prerequisite program, JDK or JRE, is not installed in the system. Please install the required JDK or JRE, and then retry the operation. KAIF62204-E HGLM Agent cannot be Installation-or-removal because there is not enough space.
Message ID Message Text Cause Solution installation-folderfor-HitachiCommand-SuiteCommon-AgentComponent\agent \bin \amc_registpp.bat -add • For "Error Code = 6" installation-folderfor-HitachiCommand-SuiteCommon-AgentComponent\agent \bin \amc_registpp.bat -del GlobalLinkManage r • For "Error Code = 7 and RC=1-15" installation-folderfor-HitachiCommand-SuiteCommon-AgentComponent\agent \bin \amc_activate.
Message ID Message Text Cause Solution /opt/HDVM/ HBaseAgent/bin/ amc_activate -a hglm If an error code other than the above was output, please contact the company from which you purchased HGLM or the maintenance company if you have a maintenance contract for HGLM. 4-172 KAIF62208-E An attempt to Installation-or-removal an HGLM Agent component failed.
Message ID Message Text Cause Solution KAIF62213-E An attempt to create File-Name file has failed. An attempt to create File-Name file has failed. Please confirm that drive having specified free space and the user have permission to execute the installer. Then reexecute installation. KAIF62214-I An attempt to create File-Name file ends successfully. An attempt to create File-Name file ends successfully. - KAIF62215-E An attempt to remove Registry-Key-Name registry has failed.
Message ID 4-174 Message Text Cause Solution KAIF62224-I An attempt to copy the File-name file from Source-directory-name directory to Targetdirectory-name directory ends successfully. An attempt to copy the File-name file from Source-directory-name directory to Targetdirectory-name directory ends successfully. KAIF62225-E An attempt to copy the Directory-name directory from Sourcedirectory-name directory to Targetdirectory-name directory has failed.
Message ID Message Text Cause Solution for Hitachi Global Link Manager. KAIF62230-I An attempt to delete An attempt to delete the Folder-Name folder the Folder-Name folder ends successfully. ends successfully. KAIF62231-E An attempt to backup the Property-FileName property files has failed. An attempt to backup the Property-FileName property files has failed. Please confirm that user have permission to execute the installer. Then reexecute installation.
Message ID Message Text Cause Solution • 4-176 Delete any space or period characters from the beginning or end of a folder name. KAIF62239-E An invalid character or a reserved word is specified in the installation folder name. Only the following characters can be used: A to Z, a to z, 0 to 9, hash mark (#), plus sign (+), hyphen (-), period (.), at mark (@), underscore (_) and the space character. An invalid character or a reserved word is specified in the installation folder name.
Message ID Message Text Cause Solution Registry-Key-Name registry has failed. Registry-Key-Name registry has failed. installer. Then reexecute installation. KAIF62246-I An attempt to get Value value from Registry-Key-Name registry ends successfully. An attempt to get Value value into Registry-Key-Name registry ends successfully. - KAIF62247-I Command-Name executed successfully with parameter =Parameter-names Parameter-names Parameter-names...
Message ID KAIF62253-W Message Text Cause Solution An attempt to register into Firewall exceptions list failed. (rc = return-code) An attempt to register into Firewall exceptions list failed. (rc = return-code) Please confirm if the following service ports for the property file "server.properties" for Hitachi Command Suite Common Agent Component are registered in the Windows Firewall exceptions list. • server.agent.port • server.http.port • server.http.
Message ID Message Text Cause Solution contact the company from which you purchased Hitachi Global Link Manager or the maintenance company if you have a maintenance contract for Hitachi Global Link Manager. KAIF62255-E HGLM Agent only supports IPF platforms. HGLM Agent only supports IPF platforms. Please execute installation on a supported OS. KAIF62256-W File-Name file not found. File-Name file not found. Please confirm that corresponding file exists in the respective path.
Message ID Message Text Cause Solution free space is 10 KB or more.) 4-180 KAIF62921-E The installgetras cannot be executed because the current user does not have the appropriate admin permissions. The installgetras utility cannot be executed because the current user does not have the appropriate administrator permissions. Please re-execute as a user with the Administrator permissions or root permission. KAIF62922-E A parameter is invalid.
5 Messages with IDs Beginning with KAPM This chapter describes messages related to Hitachi Command Suite Common Component.
KAPM00000 - KAPM09999 The following table describes messages KAPM00000 to KAPM09999, which are related to Hitachi Command Suite Common Component. Table 5-1 KAPM00000 - KAPM09999 (Messages Output by Hitachi Command Suite Common Component) Message ID KAPM00001-E Message Text ID=aa...aa,LogTraceLibrary error. Trace START failed. bb...bb aa...aa: ID of the program using the log bb...bb: Error message output by the log trace library when the system failed to start the trace KAPM00002-E ID=aa...
Message ID Message Text Description may ask you to collect troubleshooting information. KAPM00012-E ID=aa...aa,PP version is null. aa...aa: ID of the program using the log KAPM00013-E KAPM00014-E The name of the individual log trace has not been specified. aa...aa: ID of the program using the log To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. ID=aa...aa,Class name is null.
Message ID Message Text Description required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM00019-E KAPM00020-E ID=aa...aa,SyslogID size error:idEnt=bb...bb The ID (bb...bb) length attached to Eventlog is too long. aa...aa: ID of the program using the log bb...bb: Eventlog ID To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. ID=aa...
Message ID Message Text Description bb...bb: Encoding required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM00090-I The SSO server started successfully. The SSO server started successfully. KAPM00091-E An attempt to start the SSO server has failed. An attempt to start the SSO server has failed. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information.
Message ID Message Text Description may ask you to collect troubleshooting information. KAPM00107-E An attempt to delete the authentication data has failed. An attempt to delete the authentication data has failed. Retry execution. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information. KAPM00108-E An attempt to print the authentication data has failed.
Message ID Message Text Description Remove the cause of the HiRDB blockage, and then try again. KAPM00119-E Deletion of the license event data has failed. Deletion of the license event data has failed. Confirm that the DBMS is running, and then retry the operation. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
Message ID Message Text Description required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM00139-I Deletion of authentication data for all products will now start. Deletion of authentication data for all products will now start. KAPM00140-I Deletion of authentication data will now start. Deletion of authentication data will now start. Application name: aa...aa Service name: bb...bb aa...aa: Application name bb...
Message ID KAPM00204-E KAPM00205-E Message Text Description The RD area of HBase is blocked. The RD area of HBase is blocked. An error occurred during access to the DBMS. An error occurred during access to the DBMS. Remove the cause of the HiRDB blockage, and then try again. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information.
Message ID KAPM00212-E Message Text Description aa...aa: Application type To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. An event management object cannot be deleted because the specified parameter is invalid. (application type = aa...aa, event type = bb...bb, event code = cc...cc) An event management object cannot be deleted because the specified parameter is invalid. aa...
Message ID KAPM00218-W Message Text The relation between the license warning window and the version window is not registered. (application type = aa...aa) Description The relation between the license warning window and the version window is not registered. (application type = aa...aa) aa...aa: Application type KAPM00252-E The license information file does not exist. (license information file = aa...aa) The license information file does not exist. The license information file might be corrupted.
Message ID KAPM00258-E Message Text The length of the license information in the license information file is invalid. (format ID = aa...aa, number of characters = bb...bb) The length of license information in the license information file is invalid. bb...bb: Number of characters To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. Valid license information does not exist.
Message ID Message Text Description may ask you to collect troubleshooting information. KAPM00265-E The serial number in the license information file contains non-alphanumeric characters. (serial number = aa...aa) aa...aa: Serial number KAPM00266-E The subscription license capacity in the license information file contains nonalphanumeric characters. (capacity of subscription license = aa...aa) aa...
Message ID Message Text Description To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM00273-E KAPM00274-E The capacity after reduction falls below the minimum of -99,999,999 TB. The capacity after reduction falls below the minimum of -99,999,999 TB. The specified license information is invalid. (attribute = aa...aa) The specified license information is invalid. aa...
Message ID KAPM00280-E Message Text A time out occurred during exclusive control. Description A timeout occurred during exclusive control. Retry execution. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information. KAPM00281-E The meter-based term licensed capacity cannot be reduced because aa...aa day(s) passed since the usable license capacity became negative.
Message ID KAPM00287-E Message Text Information related to the exclusion control failure will be output. (function name = aa...aa, detailed error code = bb...bb, processing time = cc...cc) Description Information related to the exclusion control failure will be output. Take action according to the previous message. aa...aa: Function name bb...bb: Detailed error code cc...cc: Processing time KAPM00288-E An attempt to release the lock failed. An attempt to release the lock failed.
Message ID KAPM01008-I KAPM01010-E Message Text HTTP:POST from aa...aa Description aa...aa: IP address The IP address of the requesting client. Can't get InputStream from Request. An attempt to acquire an InputStream from a client's request has failed. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM01013-E Unsupported command was requested. The requested command name is invalid.
Message ID KAPM01028-E Message Text The file "aa...aa" could not be read. Path = bb...bb aa...aa: File name bb...bb: File path name KAPM01034-E KAPM01036-E KAPM01042-E The file "aa...aa" could not be read. Check the specified file path and the permission for reading the specified file. Can't get the required information from request. Request is invalid. The request format is invalid (analysis was successful). Request XML can't parse to DOM. - aa...aa The format of the request is invalid. aa...
Message ID Message Text Description To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM01055-E KAPM01056-E KAPM01057-E The system property specified in hcmds.home cannot be found. The system property specified in hcmds.home cannot be found. HDVM.user not found at hcmds.home. HDVM.user not found at hcmds.home. HDVM.password not found at hcmds.home. HDVM.password not found at hcmds.
Message ID Message Text Description Windows: Hitachi-Command-SuiteCommon-Component-installationfolder\conf\user.conf Solaris SPARC : /opt/HiCommand/ Base/conf/user.conf Solaris10(x64) or Linux: HitachiCommand-Suite-Common-Componentinstallation-folder/Base/conf/ user.conf KAPM01063-I HSSO configuration: Virtual Host Name = aa...aa The set virtual host name will now be displayed. aa...aa: Virtual host name KAPM01065-E KAPM01066-E Can't create DOM tree. aa...
Message ID KAPM01073-E KAPM01081-E Message Text aa...aa: Protocol version An error might have occurred in an HSSO operation requested by a secondary server. Check whether an HSSO error has occurred by referring to the log data output by the secondary server. If an error has occurred, upgrade the Suite product installed on the primary server. The format of the response from Device Manager was invalid. The format of the response from Device Manager was invalid. Authentication has failed. User ID = aa..
Message ID KAPM01090-E Message Text An attempt to create the instance of the class for authorization failed. Class = aa...aa aa...aa: Class name Description An attempt to create the instance of the class for authorization failed. Check the value of HSSO.authorization.module in the configuration file. Windows: Hitachi-Command-SuiteCommon-Component-installationfolder\conf\user.conf Solaris SPARC : /opt/HiCommand/ Base/conf/user.
Message ID KAPM01097-E KAPM01098-E KAPM01099-E KAPM01103-I Message Text Description An exception occurred during internal authentication module processing. An exception occurred during internal authentication module processing. An exception occurred during authentication module processing. An exception occurred during authentication module processing. An exception occurred during authorization module processing. An exception occurred during authorization module processing.
Message ID Message Text aa...aa: Function code bb...bb: Result code KAPM01114-E An attempt to acquire the link and launch information failed. Description To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. An attempt to acquire the link and launch information failed. Take action according to the proceeding message. KAPM01115-E Exception in DeviceManager.
Message ID KAPM01168-E Message Text The RD area of HBase is blocked. Description The RD area of HBase is blocked. Remove the cause of the HiRDB blockage, and then try again. KAPM01169-E Authentication of the JP1 token Authentication of the JP1 token failed. failed. To determine the cause and resolve the problem, detailed investigation is required. Contact the support center, who may ask you to collect troubleshooting information. KAPM01170-I The JP1 token will now be authenticated.
Message ID Message Text Description 2. Use the hcmds64radiussecret command to verify whether information is registered about the server whose name is set for the auth.server.name attribute in exauth.properties. 3. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the support center, who may ask you to collect troubleshooting information. For Kerberos: 1. Verify that the realm name and KDC set in exauth.properties are correct.
Message ID KAPM01205-E Message Text No instance of Service associated with ServiceAccessPoint. Description An attempt to acquire the service associated with ServiceAccessPoint has failed. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM01206-E No instance of SoftwareFeature An attempt to acquire the associated with Service. SoftwareFeature associated with the Service has failed.
Message ID Message Text Description to collect troubleshooting information. For RADIUS: 1. Confirm whether the authentication server can be accessed by using the host, port, and protocol set in exauth.properties, and check the settings of the external authentication server and the status of the network. 2. Use the hcmds64radiussecret command to confirm that the information for the server names specified for the auth.server.name attribute in exauth.properties is registered. 3.
Message ID Message Text Description Confirm that the value of the properties HDVM.host and HDVM.port are set in init.conf. KAPM01308-E An attempt to communicate with Device Manager failed. URL = aa...aa aa...aa: URL An attempt to communicate with Device Manager failed. Check the status of Device Manager, and check the values of HDVM.protocol, HDVM.host and HDVM.port in the configuration file. Windows: Hitachi-Command-SuiteCommon-Component-installationfolder\conf\user.
Message ID KAPM01353-E Message Text Can not map aa...aa. aa...aa: User permissions Description User permissions could not be mapped. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM01401-I Creating CIMClient. CIMClient creation is starting. KAPM01402-E Can't create CIMClient. aa...aa An attempt to create CIMClient has failed. aa...
Message ID Message Text Description Check the value of DATABASE.type in the following file. Windows: Hitachi-Command-SuiteCommon-Component-installationfolder\conf\user.conf Solaris or Linux: /opt/HiCommand/ Base/conf/user.conf KAPM02005-E A socket exception occurred while trying to establish a socket connection to server. A socket exception occurred while trying to establish a socket connection to server. Make sure that InterClient is running.
Message ID Message Text Description required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM02013-E Exception happened when some CIM class was used. An error occurred while reading or using the value specified in CIM. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM02014-E An attempt to load the definition for a class has failed.
Message ID KAPM02027-E Message Text The key property could not be changed. Description The key property could not be changed. Take action according to the proceeding message. KAPM02029-E The initialize parameter is invalid. The initialize parameter in init.conf is invalid. Take action according to the proceeding message. KAPM02030-E KAPM02031-E An unsupported data type was used. An unsupported data type was used. The CIMClass is invalid. A KEY property is required. The CIMClass is invalid.
Message ID Message Text Description This message provides additional information. Check the other messages that were output around the same time, and then follow the instructions given in those messages. KAPM02042-E KAPM02044-E KAPM02045-E The name of property is invalid. The name of property is invalid. A DBNotFoundException occurred. A DBNotFoundException occurred. The CIMClass is invalid. The CIMClass is invalid. Take action according to the proceeding message.
Message ID KAPM02056-E Message Text Description aa...aa: Description This message provides additional information. Check the other messages that were output around the same time, and then follow the instructions given in those messages. A CIMClassNotFoundException occurred. A CIMClassNotFoundException occurred. Take action according to the proceeding message. KAPM02057-E IOException occurred. Description = aa...aa aa...aa: Description KAPM02058-E InterruptedException occurred. Description = aa...
Message ID KAPM02072-E Message Text The password of a user connected to HiRDB is invalid. (user name = aa...aa) aa...aa: User name KAPM02073-E The user name of a user connected to HiRDB is invalid. (user name = aa...aa) aa...aa: User name KAPM02074-W The table name registered into DBMS is changed. Before= aa...aa After = bb...bb Description The password of a user connected to HiRDB is invalid. Check the value of HiRDB.password in the user.conf file.
Message ID KAPM02077-E Message Text An attempt to release the connection of the connection pool has failed. Description This message is displayed when an attempt to release the connection of the connection pool fails. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM02078-E KAPM02079-E A RepositoryException occurred. (details = aa...
Message ID KAPM02213-E Message Text An attempt to read the password file has failed. Description An attempt to read the password file has failed. Confirm that you have read permissions for the following file. In Windows: Hitachi-Command-SuiteCommon-Component-installationfolder\conf\.hbaspass In Solaris or Linux: /opt/HiCommand/ Base/conf/.hbaspass If you do not have read permissions, detailed investigation is required to determine the cause and resolve the problem.
Message ID Message Text Description Confirm that the DBMS, HBase Storage Mgmt Web service, and HBase Storage Mgmt Common service are running. If they are running, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information. KAPM02223-E KAPM02224-E The specified mode is unsupported. A fatal error occurred. The specified mode is unsupported.
Message ID Message Text Description may ask you to collect troubleshooting information. KAPM02232-E KAPM02233-E The resource group ID is not set. The resource group ID is not set. The specified application is not registered. The specified application is not registered. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information.
Message ID KAPM02242-I Message Text The allocation status of the resource group will now be changed. (aa...aa) Description The allocation status of the resource group will now be changed. aa...aa: Allocation status before the change KAPM02243-I The allocation status of the resource group was changed. (aa...aa) The allocation status of the resource group was changed. aa...aa: Allocation status after the change KAPM02244-I The password will now be changed. (User ID = aa...
Message ID Message Text Description registered. (group ID = aa...aa) aa...aa: Group ID KAPM02254-I Request information: (API version = aa...aa, Command name = bb...bb, User ID or session ID = cc...cc) Request information. aa...aa: API version bb...bb: Command name cc...cc: User ID or session ID KAPM02255-E The specified version is not supported. (version = aa...aa) aa...aa: API version KAPM02256-E The specified command is not supported. (command = aa...aa) aa...
Message ID Message Text Description To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM02262-E KAPM02263-E The request parameter is invalid. This user does not have execution permissions. (ID = aa...aa) aa...aa: Session ID KAPM02269-E The specified user was not found. The request parameter is invalid. To determine the cause and resolve the problem, detailed investigation is required.
Message ID Message Text Description aa...aa: Session ID bb...bb: User ID KAPM02276-I The password was changed successfully. (ID = aa...aa, user ID = bb...bb) The password was changed successfully. aa...aa: Session ID bb...bb: User ID KAPM02277-I The user profile will now be changed. (ID = aa...aa, user ID = bb...bb) The user profile will now be changed. aa...aa: Session ID bb...bb: User ID KAPM02278-I The user profile was changed successfully. (ID = aa...aa, user ID = bb...
Message ID Message Text Description aa...aa: Session ID bb...bb: User ID KAPM02284-I The user will now be locked. (ID = aa...aa, user ID = bb...bb) The user will now be locked. aa...aa: Session ID bb...bb: User ID KAPM02285-I The user was locked successfully. (ID = aa...aa, user ID = bb...bb) The user was locked successfully. aa...aa: Session ID bb...bb: User ID KAPM02286-E An attempt to lock the user has An attempt to lock the user has failed. failed. aa...aa See the message that follows. aa...
Message ID Message Text Description To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM02296-E KAPM02297-E A domain name has not been set. A domain name has not been set. The specified distinguished name already exists. (distinguished name = aa...aa) The specified distinguished name already exists. aa...
Message ID Message Text Description may ask you to collect troubleshooting information. KAPM02305-E Attempts to set the system environment variables PDDIR and PATH have failed. error code = aa...aa aa...aa: Error code KAPM02306-E An attempt to clear an HiRDB system environment variable has failed. error code = aa...aa aa...aa: Error code KAPM02307-E The application type is required, but is not set. Attempts to set the system environment variables PDDIR and PATH have failed.
Message ID Message Text Description 5. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information. For RADIUS: KAPM02410-W Authentication with an external authentication server has failed. (user ID = aa...aa, host = bb...bb, port = cc...cc, protocol = dd...dd) aa...aa: User ID 1.
Message ID Message Text cc...cc: Protocol Description 1. By using the host, port, and protocol set in "exauth.properties", check whether the authentication server can be accessed, the settings of the external authentication server, and the status of the network. 2. By using the hcmds64ldapuser command, check that the information for the server names specified in the "auth.server.name" attribute in "exauth.properties" is registered. 3. If StartTLS is used, check the SSL settings. 4.
Message ID Message Text Description exauth.properties, and check the settings of the external authentication server and the status of the network. 2. Use the hcmds64ldapuser command to confirm that the information for the server names specified for the auth.server.name attribute in exauth.properties is registered. 3. If StartTLS is used, check the SSL settings. 4. If an OCSP is enabled, make sure that the certificate is valid. 5.
Message ID Message Text KAPM02416-E A communication error occurred in an external authentication server. Description A communication error occurred in an external authentication server. Perform one of the following procedures: For LDAP: 1. By using the host, port, and protocol set in "exauth.properties", check whether the authentication server can be accessed, the settings of the external authentication server, and the status of the network. 2.
Message ID Message Text Description aa...aa: Host For LDAP: bb...bb: Port 1. Confirm whether the authentication server can be accessed by using the host, port, and protocol set in exauth.properties, and check the settings of the external authentication server and the status of the network. 2. Use the hcmds64ldapuser command to confirm that the information for the server names specified for the auth.server.name attribute in exauth.properties is registered. 3.
Message ID Message Text bb...bb: Port Description 1. Confirm whether the authentication server can be accessed by using the host, port, and protocol set in exauth.properties, and check the settings of the external authentication server and the status of the network. 2. Use the hcmds64ldapuser command to confirm that the information for the server names specified for the auth.server.name attribute in exauth.properties is registered. 3. If StartTLS is used, check the SSL settings. 4.
Message ID Message Text Description Review the settings in the configuration file for the external authentication server. KAPM02422-W A parameter in the exauth.properties file contains an invalid value (aa...aa = bb...bb). The default value (cc...cc) will be used. aa...aa: Parameter name bb...bb: Parameter value The exauth.properties file (configuration file for the external authentication server) contains an invalid parameter file.
Message ID KAPM02430-E Message Text Description Verification of a RADIUS packet Verification of a RADIUS packet has has failed. (host = aa...aa, port failed. = bb...bb, protocol = cc...cc, cause = dd...dd) aa...aa: Host bb...bb: Port cc...cc: Protocol dd...dd: Cause of failure KAPM02431-E The connection to an external authentication server has timed out. (host = aa...aa, port = bb...bb, protocol = cc...cc) The connection to an external authentication server has timed out. aa...
Message ID Message Text Description auth.server.name attribute in exauth.properties is registered. 3. KAPM02432-E If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information. SSL-encrypted communication with the external authentication server has failed. (host = aa...aa, port = bb...bb, protocol = cc...
Message ID Message Text Description information for the server names specified for the auth.server.name attribute in exauth.properties is registered. 3. KAPM02434-W KAPM02435-W KAPM02436-E KAPM02450-I If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information. The lock processing was interrupted. The lock processing was interrupted.
Message ID Message Text Description failed. (authentication method = aa...aa, user ID = bb...bb) aa...aa: Authentication method bb...bb: User ID KAPM02454-E Acquisition of SRV records failed. (domain name = aa...aa, protocol = bb...bb) aa...aa: Domain name Acquisition of SRV records failed. Make sure that SRV records have been defined on the DNS server. bb...bb: Protocol KAPM02455-E A domain has been removed from the domain list because the acquisition of SRV records failed. (domain name = aa...
Message ID Message Text Description KAPM02462-E The specified device type is too The specified device type is too long. long. (device type = aa...aa) To determine the cause and resolve aa...aa: Device type the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM02463-E The specified device type includes non-alphanumeric characters. (device type = aa...aa) aa...
Message ID Message Text Description required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM02470-E KAPM02471-E No application has been specified. No authorization information is specified for the user group. No application has been specified. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information.
Message ID Message Text bb...bb: Device type cc...cc: Device number KAPM02477-E A user group with the same ID is already registered. (user group ID = aa...aa, device type = bb...bb, device number = cc...cc) aa...aa: Resource group ID bb...bb: Device type Description may ask you to collect troubleshooting information. A user group with the same ID is already registered. To determine the cause and resolve the problem, detailed investigation is required.
Message ID KAPM02484-E Message Text The specified user account is not registered. (user ID = aa...aa) aa...aa: User ID KAPM02485-E The specified role was not found. (role ID = aa...aa, device type = bb...bb, device number = cc...cc) aa...aa: Role ID bb...bb: Device type Description The specified user account is not registered. Make sure that a user account is registered. The specified role was not found. To determine the cause and resolve the problem, detailed investigation is required.
Message ID KAPM02491-E Message Text A user group with the same name is already registered. (user group name = aa...aa) aa...aa: User group name KAPM02492-E The specified user group was not found. (user group name = aa...aa, device type = bb...bb, device number = cc...cc) aa...aa: User group name bb...bb: Device type cc...cc: Device number Description A user group with the same name is already registered. To determine the cause and resolve the problem, detailed investigation is required.
Message ID KAPM02503-E KAPM02504-E KAPM02505-E Message Text A minimum of aa...aa uppercase characters. A minimum of aa...aa upper-case characters. aa...aa:the minimum number of characters Enter an appropriate value according to the error message. A minimum of aa...aa lowercase characters. A minimum of aa...aa lower-case characters. aa...aa:the minimum number of characters Enter an appropriate value according to the error message. A minimum of aa...aa numerals. A minimum of aa...aa numerals. aa.
Message ID Message Text Description • KAPM02513-W Authentication by using a KDC failed. (Kerberos principal = aa...aa, KDC = bb...bb) Make sure the specified host name in the KDC is registered in the DNS server. Authentication by using a KDC failed. aa...aa: Kerberos principal name bb...bb: KDC KAPM02514-I The krb5.conf file, used for The krb5.conf file, used for internal internal processing, was processing, was successfully deleted. successfully deleted. (file name = aa...aa) aa...
Message ID Message Text Description Check and, if necessary, revise the exauth.properties file realm or the KDC definition. KAPM02522-W The SRV records are undefined. The SRV records are undefined. (record key = aa...aa) aa...aa: SRV record key KAPM02523-I Acquisition of the SRV records was successful. (SRV record = aa...aa) Acquisition of the SRV records was successful. aa...aa: SRV record KAPM02524-E Acquisition of the SRV records failed. (record key = aa...aa) aa...
Message ID Message Text Description Enter an appropriate value according to the error message. KAPM02552-W An invalid permission is registered. (application type = aa...aa) aa...aa: Application type An invalid permission is registered. Use the hcmds64intg command to delete the invalid authentication data. KAPM02603-E The resource group already The resource group aa...aa already exists. (resource group name = exists. aa...aa) Check the resource group name, and aa...
Message ID Message Text Description determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information. KAPM02618-E A A CIMUnavailableDatabaseException CIMUnavailableDatabaseExcept occurred. ion occurred. Make sure that the connection to the repository is correct. If you cannot, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
Message ID Message Text Description cc...cc: Module name KAPM02634-I A resource group property has been edited. (login ID = aa...aa, resource group ID = bb...bb, module name = cc...cc) A resource group property has been edited. (login ID = aa...aa, resource group ID = bb...bb, module name = cc...cc) aa...aa: Login ID bb...bb: Resource group ID cc...cc: Module name KAPM02635-E Creation of a resource group has failed. (login ID = aa...aa, resource group name = bb...bb, module name = cc...
Message ID KAPM02650-I Message Text A parameter has been sent. (HSSO token = aa...aa, application name = bb...bb) Description A parameter has been sent. (HSSO token = aa...aa, application name = bb...bb) aa...aa: HSSO token bb...bb: Application name KAPM02651-I KAPM02652-I The software definition aa...aa does not exist. aa...aa: Application name The specified software definition aa...aa does not exist in the repository. aa...aa is not associated with a resource bundle. aa...
Message ID Message Text Description KAPM02674-I A resource group property has been edited. A resource group property has been edited. KAPM02675-E Creation of a resource group has failed. Creation of a resource group has failed. KAPM02676-E Deletion of a resource group has failed. Deletion of a resource group has failed. KAPM02677-E Addition of a resource has failed. Addition of a resource has failed. KAPM02679-E An attempt to edit a resource group property has failed.
Message ID KAPM02804-E KAPM02805-E KAPM02806-E KAPM02807-E Message Text A Exception occurred. Message=aa...aa Description A Exception occurred. aa...aa: Message Take action according to the proceeding message. [Stack Trace]:aa...aa A stack trace will be output. aa...aa: Stack trace Take action according to the proceeding message. A FileNotFoundException occurred. A FileNotFoundException occurred. A IOException occurred. A IOException occurred.
Message ID KAPM02818-I Message Text aa...aa: bb...bb Description Displays the column name and value. aa...aa: Column name bb...bb: Value KAPM02891-E DB is not found. Database is not found. Check the value of DATABASE.path in the configuration file. Windows: Hitachi-Command-SuiteCommon-Component-installationfolder\conf\user.conf Solaris or Linux: /opt/HiCommand/ Base/conf/user.conf KAPM02892-E User name or password is invalid. User name or password is invalid. Check the value of DATABASE.
Message ID KAPM02899-E Message Text Fatal error. Description Processing continuation is impossible. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM02901-I KAPM02902-E KAPM02903-E [Trace]: aa...aa A trace message will be output. aa...aa: Trace message • Read legacy record. • Order of hcmdsID change from x to 0. • Change legacy record. • Update CIMClient From 01-00 to 01-01.
Message ID Message Text Description may ask you to collect troubleshooting information. KAPM02906-E KAPM02907-E [Stack Trace]: aa...aa A stack trace is output. aa...aa: Stack trace To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. A SQLException occurred. Message = aa...aa A SQLException occurred. aa...aa: Message KAPM02910-E A SELECT statement failed. Table name = aa...aa aa...
Message ID Message Text Description KAPM02982-I The database was successfully updated. The database was successfully updated. KAPM02991-E DB is not found. Database is not found. Check the value of DATABASE.path in the configuration file. Windows: Hitachi-Command-SuiteCommon-Component-installationfolder\conf\user.conf Solaris or Linux: /opt/HiCommand/ Base/conf/user.conf KAPM02992-E User name or password is invalid. User name or password is invalid. Check the value of DATABASE.user and DATABASE.
Message ID Message Text Description Take action according to the proceeding message. KAPM03001-E KAPM03004-E KAPM03005-E Illegal parameters have been specified to create HSSO Context. Illegal parameters have been specified to create HSSO Context. An error occurred on the HSSO Server. An error occurred on the HSSO server. An error occurred when CIM Client was created. Specify the correct user ID and password. To determine the cause and resolve the problem, detailed investigation is required.
Message ID KAPM03055-E Message Text A JavaScript-enabled browser is required. Description A JavaScript-enabled browser is required. Use a browser that can use JavaScript. Alternatively, change the setting of the browser to use JavaScript if the use of script is disabled. KAPM03080-E KAPM03081-E KAPM03082-E HSSOIllegalArgumentException :Illegal parameters have been specified to create HSSO Context. HSSOIllegalArgumentException:Illegal parameters have been specified to create HSSO Context.
Message ID KAPM03086-E KAPM03087-E Message Text HSSOIllegalStateException: An unsupported version is specified. An error occurred while accessing the DBMS. Description HSSOIllegalStateException: An unsupported version is specified. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. An error occurred while accessing the DBMS.
Message ID Message Text Description To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM03110-E KAPM03111-E KAPM03112-E KAPM03113-E A CIMProviderException was generated during subwindow display processing. A CIMProviderException was generated during subwindow display processing. An exception was generated during menu bar display processing.
Message ID Message Text Description required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information. KAPM03123-E KAPM03124-E KAPM03125-E Could not acquire the required The required parameter could not be parameter. ParmName=aa...aa acquired. aa...aa: Parameter name Retry execution. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem.
Message ID KAPM03361-E Message Text An attempt to get the root element data has failed. Description An attempt to get the root element data has failed. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM03362-E An attempt to get the common repository has failed. An attempt to get the common repository has failed.
Message ID Message Text Description bb...bb: Related class name cc...cc: Class name of a relation place dd...dd: Class name of a related agency ee...ee: Attribute of a relation place ff...ff: Attribute of a related agency KAPM03371-W A tree element relation (TNB_AllInstanceNavigationDef ) is invalid. name=aa...aa, fromName=bb...bb, toClassName=cc...cc A tree element relation (TNB_AllInstanceNavigationDef) is invalid. aa...aa: Related name bb...bb: Class name of a relation place cc...
Message ID Message Text Description Support Center, who may ask you to collect troubleshooting information. KAPM03382-E KAPM03383-E An internal error occurred. If you click the Refresh button, the initial object tree will be displayed. If you cannot display the tree, collect maintenance information, and then contact customer support. An internal error occurred. An internal error has occurred. Retry the operation. If the problem still cannot be solved, log in again and then retry.
Message ID Message Text KAPM03504-W A resource is not found, so the localization object acquisition failed. A resource is not found, so the localization object acquisition failed. The selected object is already deleted. The selected object is already deleted. A HSSOIllegalStateException occurred during launch. A HSSOIllegalStateException occurred during launch. KAPM03505-W KAPM03702-E Description To determine the cause and resolve the problem, detailed investigation is required.
Message ID Message Text Description To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM03716-E The format of the URL bb...bb The format of the URL bb...bb for the for the object aa...aa is invalid. object aa...aa is invalid. aa...aa: Object name bb...bb: URL KAPM03717-W The resource bb...bb for object aa...aa cannot be accessed.
Message ID KAPM03951-E KAPM03952-E Message Text An internal server error has occurred. An attempt to get the Session has failed. Description An internal server error has occurred. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. An attempt to get the Session has failed. To determine the cause and resolve the problem, detailed investigation is required.
Message ID Message Text Description required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM03962-E An attempt to get the application name has failed. An attempt to get the application name has failed. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM03963-E Authentication has failed. Authentication has failed. Log in again.
Message ID Message Text Description again. If it is running, restart the Single Sign On Server, and log in again. KAPM03966-E Communications of the Single Sign On server have failed. 2. If you are using Device Manager, make sure its services are running. 3. Make sure that the settings and statuses of the Single Sign On Server are appropriate. 4. If the problem cannot be solved, collect maintenance information, and then contact the Support Center.
Message ID Message Text Description collect troubleshooting information. Restore the data from the backup file. KAPM03971-E The application is not registered. The name of application=aa...aa. aa...aa: Name of application The application is not registered. Log in again. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
Message ID Message Text Description To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM04011-E aa...aa aa...aa: NullPointerException message KAPM04012-E aa...aa aa...aa: IndexOutOfBounds exception message A NullPointerException occurred during the creation of an object, such as a file object. To determine the cause and resolve the problem, detailed investigation is required.
Message ID KAPM04027-E Message Text Description The SSL port number is invalid. The SSL port number is invalid. Specify a port number with a value from 1 to 65535. KAPM04028-E The SSL port number is invalid. The SSL port number is invalid. The type of the port number is not an integer. Check the specified value. KAPM04034-E An attempt to read the file hsso.conf has failed. An attempt to read the file hsso.conf has failed. Make sure that the hsso.
Message ID KAPM04042-E Message Text The specified SSL port number is invalid. Description The specified SSL port number is invalid. Specify a valid option, and then reexecute the command. KAPM04050-I The command hcmds64prmset ended successfully. The command ended successfully. KAPM04051-E The command hcmds64prmset has failed. The command failed. An option is invalid. The specified command line input was invalid. KAPM04052-E Specify a valid option, and then reexecute the command.
Message ID Message Text KAPM04069-W An attempt to set the port number failed because the host name is not set. Change the port number together with the host name. If you change the connection port of the secondary server, you must also change the host name. Container server name is invalid. Server= aa...aa Container server name is invalid. Archive file is not found. file=aa...aa Archive file is not found. KAPM04101-E Description Change the connection port number together with the host name.
Message ID Message Text Description may ask you to collect troubleshooting information. KAPM04109-E Cannot set JavaVM option. Cannot set JavaVM option. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM04110-E Cannot set Java options. Cannot set Java options. To determine the cause and resolve the problem, detailed investigation is required.
Message ID Message Text Description KAPM04117-I Starting web application deletion... Web application deletion is now starting. KAPM04118-E Program type is not registered. type=aa...aa Program type is not registered. aa...aa: Program type KAPM04119-E KAPM04120-E Cannot delete service and folder. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. Cannot delete service and folder.
Message ID KAPM04126-E KAPM04127-E Message Text Cannot insert new line character. An attempt to exchange hcmdswebpp.ini with tmphcmdswebpp.ini has failed. Description Cannot insert new line character. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. An attempt to exchange hcmdswebpp.ini with tmphcmdswebpp.ini has failed.
Message ID Message Text Description may ask you to collect troubleshooting information. KAPM04135-E An unexpected error occurred. Error code = aa...aa aa...aa: Error code KAPM04136-E RegOpenKeyEx command error.ErrorCode(aa...aa) aa...aa: Error code KAPM04137-E A duplicate name exists on the network. An unexpected error occurred. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information.
Message ID Message Text Description To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM04143-E The specified service has been marked for deletion. The specified service has been marked for deletion. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information.
Message ID KAPM04150-E Message Text The directory cannot be removed. directory=aa...aa aa...aa: Directory name KAPM04151-E The directory is not empty. directory=aa...aa aa...aa: Directory name KAPM04152-E The directory name is invalid. directory=aa...aa aa...aa: Directory name KAPM04153-E QueryServiceStatus command error. code=aa...aa aa...aa: Error code KAPM04154-E KAPM04155-E The directory is not empty. To determine the cause and resolve the problem, detailed investigation is required.
Message ID Message Text Description To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM04159-E Failed to delete specified file. file=aa...aa aa...aa: File name KAPM04160-E Failed to rename aa...aa to bb...bb. KAPM04162-E To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information.
Message ID KAPM04167-E Message Text aa...aa: Service name To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. Failed to get service folder. service-folder=aa...aa Failed to get service folder. aa...aa: Service folder name KAPM04168-W Failed to delete service folder. service-folder=aa...aa aa...
Message ID Message Text Description may ask you to collect troubleshooting information. KAPM04176-E Failed to get the war file name. Failed to get the war file name. file=aa...aa To determine the cause and resolve aa...aa: File name the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM04177-E Failed to read javavm.properties file. Failed to read javavm.properties file. An attempt to exchange javavm.
Message ID Message Text Description required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM04208-E KAPM04209-E The system cannot open the file. The process cannot access the file because it is being used by another process. The system cannot open the file. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information.
Message ID Message Text Description may ask you to collect troubleshooting information. KAPM04216-E Failed to get template webusers.xml file name. Failed to get template web-users.xml file name. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM04217-E Failed to get template javavm.properties file name. Failed to get template javavm.properties file name.
Message ID Message Text Description required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM04224-E KAPM04225-E KAPM04226-E The librarypath option is invalid. The librarypath option is invalid. The javaoption option is invalid. The javaoption option is invalid. The Xms option is invalid. The Xms option is invalid. To determine the cause and resolve the problem, detailed investigation is required.
Message ID Message Text Description may ask you to collect troubleshooting information. KAPM04232-E An attempt to register the program type in the registry failed. program type = aa...aa aa...aa: Program type KAPM04233-E An attempt to delete the program type in the registry failed. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information.
Message ID Message Text Description may ask you to collect troubleshooting information. KAPM04239-E KAPM04240-E An attempt to get the service control manager execution file path failed. An error occurred when the environment settings folder was created. An attempt to get the service control manager execution file path failed. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information.
Message ID KAPM04245-E KAPM04246-E KAPM04247-E Message Text Description An error occurred when registering and updating Tomcat. An error occurred when registering and updating Tomcat. An error occurred when the usrconf.properties file was merged. An error occurred when the usrconf.properties file was merged. An attempt to acquire the number of file lines has failed. An attempt to acquire the number of file lines has failed.
Message ID Message Text Description required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM04252-E An error occurred in an internal function. (call function = aa...aa, use function = bb...bb, note = cc...cc, error code = dd...dd) aa...aa: Call function bb...bb: Use function An error occurred in an internal function. To determine the cause and resolve the problem, detailed investigation is required.
Message ID Message Text Description may ask you to collect troubleshooting information. KAPM04258-E KAPM04259-E An error occurred during execution of the hcmds64srv command. An error occurred during execution of the hcmds64srv command. An attempt to create the boot shell has failed. An attempt to create the boot shell has failed. For details, refer to the hcmds64srv command log. To determine the cause and resolve the problem, detailed investigation is required.
Message ID Message Text Description may ask you to collect troubleshooting information. KAPM04266-E The contents of the directory are invalid. (Directory path = aa...aa) aa...aa: Directory path KAPM04267-W An attempt to delete the hwc directory has failed. (Directory path = aa...aa) The contents of the directory are invalid. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information.
Message ID Message Text Description To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM04279-E An attempt to add a service description has failed. This message is displayed if an attempt to add a service description has failed. Take the appropriate action based on the preceding message. KAPM04280-E A memory allocation error occurred.
Message ID KAPM04289-E Message Text An attempt to access the service explanation definition file has failed. Description This message is displayed if an attempt to access the service explanation definition file has failed. Please see the message that follows. KAPM04290-E The service name was not specified. This message is displayed if the service name is not specified. Please see the message that follows. KAPM04291-I Registration of the aa...aa Web application will now start.
Message ID Message Text Description KAPM04311-E An attempt to acquire an An attempt to acquire an installation installation path for aa...aa has path for aa...aa has failed. failed. Manually delete the Manually delete the installation installation directory. directory. aa...aa: Product name KAPM04312-E An attempt to acquire registry information has failed. An attempt to acquire registry information has failed. KAPM04313-E An attempt to acquire the registry information has failed.
Message ID Message Text Description required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM04381-E IllegalDataException occurred. An IllegalDataException has occurred. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM04382-E IllegalOptionException occurred. An IllegalOptionException has occurred. Specify a valid option to execute the command.
Message ID Message Text Description Windows: Copy the file hcmdsrepClient.dtd and hcmdsrepServer.dtd from HitachiCommand-Suite-Common-Componentinstallation-folder\sample\confto Hitachi-Command-Suite-CommonComponent-installation-folder\conf Solaris or Linux: Copy the file hcmdsrepClient.dtd and hcmdsrepServer.dtd from /opt/ HiCommand/Base/sample/conf to /opt/HiCommand/Base/conf KAPM04411-I KAPM04421-E HTTP:POST from aa...aa aa...aa: IP address The IP address of the requesting client.
Message ID Message Text Description To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM04440-E Token has timed out. Token has timed out. Execute hcmdsrep again. KAPM04446-I Starting information registration... Repository registration is now starting. KAPM04455-W aa...aa has already registered in Repository. aa...aa was already registered in the repository. aa...
Message ID Message Text Description The database might be corrupted. detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information. KAPM04489-E This version does not support the add option. This version does not support the add option. The add option cannot be used. KAPM04499-E Detail of exception: aa...aa Detail of exception. aa...aa: Contents of the exception KAPM04510-E Option is invalid.
Message ID Message Text Description Specify a valid option. KAPM04522-E Invalid Group or Role. Invalid Group or Role. Specify the name and password of a user who belongs to the GROUP "Global" and ROLE "Admin". KAPM04523-E KAPM04524-E KAPM04525-E KAPM04526-E Username or password is invalid. Username or password is invalid. Failed to connect to HiCommand Suite Single Sign On Service. Failed to connect to Hitachi Command Suite Single Sign On Service. Failed to connect to HiCommand Device Manager.
Message ID Message Text Description required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM04554-E Not support tag type detected. An unsupported tag type was detected. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM04555-E Value is too long. The value is too long. Enter a string that does not exceed the character limit.
Message ID Message Text Description may ask you to collect troubleshooting information. KAPM04602-E Command format is invalid. invalid-param=aa...aa aa...aa: Invalid parameter KAPM04603-E File is not found. filename=aa...aa aa...aa: File name KAPM04604-E Directory is not found. directory-name=aa...aa aa...aa: Directory name KAPM04605-E Bundle PP Name is invalid. name=aa...aa aa...aa: Invalid value KAPM04606-E The command format is invalid.
Message ID Message Text KAPM04615-E Failed to delete server. Description An attempt to delete the server has failed. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM04616-E KAPM04623-E Server is running. pid=aa...aa The server is running. aa...aa: Process ID To determine the cause and resolve the problem, detailed investigation is required.
Message ID KAPM04631-I Message Text The service was successfully deleted. (service name = aa...aa) Description The service was successfully deleted. aa...aa: Service name KAPM04632-I The hcmdsweb command successfully registered an application. The hcmdsweb command successfully registered an application. KAPM04633-I The hcmdsweb command successfully deleted an application. The hcmdsweb command successfully deleted an application. KAPM04634-E The configuration information is incorrect. (cause = aa..
Message ID Message Text Description required. Contact customer support, who may ask you to collect troubleshooting information. KAPM04642-I The server was successfully deleted. (server name = aa...aa) The server was successfully deleted. aa...aa: Server name KAPM04643-E Deletion of the server failed. (server name = aa...aa) aa...aa: Server name KAPM04644-E An attempt to acquire the RMI naming port failed. (server name = aa...aa) aa...
Message ID KAPM04653-I Message Text The application was successfully deployed. (server name = aa...aa, application name = bb...bb) Description The application was successfully deployed. aa...aa: Server name bb...bb: Application name KAPM04654-E Deployment of the application failed. (server name = aa...aa, application name = bb...bb) aa...aa: Server name bb...bb: Application name KAPM04655-E Deletion of the web application directory failed. (path = aa...aa) aa...
Message ID Message Text Description who may ask you to collect troubleshooting information. KAPM04662-I The service was successfully deleted from Service Control Manager. (service name = aa...aa) The service was successfully deleted from Service Control Manager. aa...aa: Service name KAPM04663-E Deletion of the service from Deletion of the service from Service Service Control Manager failed. Control Manager failed. (service name = aa...aa) To determine the cause and resolve aa...
Message ID KAPM04673-E KAPM04674-E KAPM04675-W Message Text Description aa...aa: Path To determine the cause and resolve the problem, detailed investigation is required. Contact customer support, who may ask you to collect troubleshooting information. Creation of the service control file failed. (path = aa...aa) Creation of the service control file failed. aa...aa: Path To determine the cause and resolve the problem, detailed investigation is required.
Message ID Message Text Description To determine the cause and resolve the problem, detailed investigation is required. Contact customer support, who may ask you to collect troubleshooting information. KAPM04681-E Execution of the chkconfig command failed. (error code = aa...aa) aa...aa: Error code KAPM04682-E KAPM04684-E An error occurred in the SAX parser. An attempt to change the file access permissions failed. (path = aa...aa) aa...
Message ID KAPM04691-I Message Text A command will now be executed. (command line = aa...aa) Description A command will now be executed. aa...aa: Command line KAPM04692-I The hcmdsweb command finished successfully. The hcmdsweb command finished successfully. KAPM04693-E The hcmdsweb command failed. The hcmdsweb command failed. A service is starting up. (service name = aa...aa) A service is starting up. KAPM04694-E aa...aa: Service name KAPM04695-E The application data has already been deleted.
Message ID KAPM04705-E Message Text The option "aa...aa" is not supported. aa...aa: Option KAPM04706-E KAPM04707-E KAPM04710-E Description The option "aa...aa" is not supported. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. The option "aa...aa" appears 2 times or more. The option "aa...aa" appears 2 times or more. aa...
Message ID Message Text Description Storage Mgmt Web Service has started, confirm that the hostname in hsso.conf is correct. Windows: Hitachi-Command-SuiteCommon-Component-installationfolder\conf\hsso.conf Solaris or Linux: /opt/HiCommand/ Base/conf/hsso.conf KAPM04716-E Failed to connect to the host specified in hsso.conf. Failed to connect to the host specified in hsso.conf. Confirm that the host name in hsso.conf is correct.
Message ID KAPM04724-E Message Text Invalid server information was detected. Description Invalid server information was detected. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM04800-E Authentication information is insufficient. Authentication information is insufficient. Use a SOAP Client that send Authentication information. KAPM04801-E Authentication has failed.
Message ID KAPM04806-E Message Text The received XML element aa...aa contains an unexpected value cc...cc for attribute bb...bb. The expected value is dd...dd. TARGET=ee...ee aa...aa: XML tag name including unexpected value bb...bb: Name of attribute unexpected value is set Description The received XML element aa...aa contains an unexpected value cc...cc for attribute bb...bb. The expected value is dd...dd. To determine the cause and resolve the problem, detailed investigation is required.
Message ID KAPM04812-E KAPM04813-E Message Text Failed to connect to HiCommand Device Manager. Failed to connect to Device Manager. An exception occurred. TARGET=aa...aa An exception occurred. aa...aa: Information for processing KAPM04814-W Description Confirm that the service is running and check the value of HDVM.host in the init.conf file. To determine the cause and resolve the problem, detailed investigation is required.
Message ID KAPM04826-I Message Text The instance has been updated. TARGET=aa...aa Description The instance has been updated by the set operation. aa...aa: Information for processing KAPM04827-I A new instance has been created. TARGET=aa...aa A new instance has been created by the set operation. aa...aa: Information for processing KAPM04828-I The class is empty. TARGET=aa...aa The result of the enumerate operation shows the class is empty. aa...
Message ID KAPM04835-W Message Text The received XML element bb...bb has no child element aa...aa. TARGET=cc...cc aa...aa: Required tag name Description The received XML element bb...bb has no child element aa...aa. Specify the bb...bb element for the aa...aa element in the XML file. bb...bb: Tag name of parent element cc...cc: Information for processing KAPM04836-E The received XML element aa...aa with attribute bb...bb=cc...cc is duplicated. TARGET=dd...dd aa...
Message ID KAPM04901-E Message Text Description aa...aa: Information for processing required. Contact Support Center, who may ask you to collect troubleshooting information. The parameter is invalid. The parameter is invalid. Set the valid parameter. KAPM04902-E A fatal error occurred. A fatal error occurred. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information.
Message ID Message Text Description KAPM04953-I PrintWriter has closed. PrintWriter has closed. KAPM04954-W PrintWriter cannot be closed. PrintWriter is null. PrintWriter cannot be closed. PrintWriteris null. KAPM04955-I BufferedReader has closed. BufferedReader has closed. KAPM04956-W BufferedReader cannot be closed. BufferedReader is null. BufferedReader cannot be closed. BufferedReader is null. KAPM04957-E The specified application command is not registered. application name = "aa...
Message ID Message Text KAPM04976-E IllegalOptionException occurred. Description = "aa...aa" aa...aa: Error details KAPM04977-E InconsistencyException occurred. Description = "aa...aa" aa...aa: Error details Description IllegalOptionException occurred. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. InconsistencyException occurred.
Message ID KAPM05008-E KAPM05009-I Message Text Description Failed to stop service. servicename=aa...aa An attempt to stop the service has failed. aa...aa: Service name To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. Already stopped service. service-name=aa...aa The service is already stopped. aa...aa: Service name KAPM05010-E KAPM05011-E Failed to query service. service-name=aa...
Message ID KAPM05015-E Message Text An internal function has failed. Function name=aa...aa, error code=bb...bb aa...aa: Internal function name Description An internal function has failed. Take action according to the proceeding message. bb...bb: Maintenance code KAPM05016-I Succeeded in starting of service. service-name=aa...aa A request to start the service was accepted. aa...aa: Service name KAPM05017-I Succeeded in stopping of service. service-name=aa...
Message ID Message Text KAPM05024-W Failed to initialize trace. Reason=aa...aa aa...aa: Reason KAPM05025-I The start type has been successfully changed. servicename = aa...aa Description Failed to initialize trace. Processing is continued without a trace. The start type has been successfully changed. aa...aa: Service name KAPM05026-E An attempt to change the start type has failed. service-name = aa...aa aa...aa: Service name KAPM05027-E An attempt to start the DBMS service has failed.
Message ID KAPM05038-W Message Text The error has occurred in aa...aa command. code=bb...bb Description The error has occurred in aa...aa command. aa...aa: Command bb...bb: Error code KAPM05201-E The memory is insufficient. (aa...aa) aa...aa: Variable name KAPM05202-E KAPM05203-E The memory is insufficient. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information.
Message ID Message Text Description may ask you to collect troubleshooting information. KAPM05208-E The error occurred in the HandlerRoutine. An error occurred during list addition of the process's handler function. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM05209-I The service_stop_thread is started. A service stop request thread was opened.
Message ID KAPM05216-E Message Text The error occurred in the start of service. Description An attempt to start the service failed or the service stopped abnormally. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM05217-E Failed to get to the option definition file value. An attempt to get the value of the option definition file has failed.
Message ID KAPM05224-E KAPM05225-E Message Text Description aa...aa: Registry key or registry path To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. The error occurred in the LoadLibrary. An attempt to load the DLL has failed. The error occurred in the GetProcAddress. To determine the cause and resolve the problem, detailed investigation is required.
Message ID Message Text Description To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM05231-E KAPM05232-E KAPM05234-E An attempt to execute the thread-dump acquisition command has failed. The service stopped abnormally. (service name = aa...aa) An attempt to execute the threaddump acquisition command has failed.
Message ID KAPM05256-E Message Text A fatal error occurred. Description A fatal error occurred. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM05257-E Log initialization has failed. Log initialization has failed. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information.
Message ID Message Text Description KAPM05281-I Deletion of a secret has succeeded. Deletion of a secret has succeeded. KAPM05282-E An option is invalid. An option is invalid. Specify a valid option. KAPM05285-E An internal error occurred. An internal error occurred. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM05286-E A fatal error occurred. A fatal error occurred.
Message ID Message Text Description required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information. KAPM05301-E The license has expired. The license has expired. Use a license key that has not expired. KAPM05302-E The system environment is incorrect. The system environment is incorrect. The entered license key is invalid. The entered license key is invalid. KAPM05304-I Processing ended normally.
Message ID KAPM05316-E KAPM05317-E Message Text Description The specified directory name aa...aa is invalid. The specified directory name aa...aa is invalid. aa...aa: Invalid directory name Confirm that the specified directory is correct. aa...aa is not registered. bb...bb is available. aa...aa is not registered. bb...bb is available. aa...aa: Program product name Specify the registered program specified in option product name. bb...
Message ID KAPM05325-E Message Text An attempt to execute hcmdsras failed. Description An attempt to execute hcmdsras failed. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM05326-E An attempt to execute jar has failed. An attempt to execute jar has failed. KAPM05328-I The hcmdsbasebackup processing has succeeded. The hcmdsbasebackup processing has succeeded.
Message ID Message Text Description Center and acquire a new license key file. KAPM05337-I The license key that should be entered does not exist in the license key file. The license key that should be entered does not exist in the license key file. KAPM05390-I The hcmdsras processing has succeeded. The hcmdsras processing has succeeded. KAPM05392-W An attempt to get the System Log failed. An attempt to get the System Log failed. Confirm that the specified license key file is correct.
Message ID Message Text KAPM05410-E An exception occurred. Description An exception occurred. See the following message KAPM49001-E for details. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM05411-E KAPM05413-E The file "aa...aa" could not be read. The file "aa...aa" could not be read. aa...
Message ID Message Text Description To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM05422-W KAPM05423-E KAPM05424-E aa...aa error(s) were detected in the response. aa...aa error(s) were detected in the response. aa...aa: Number of errors To determine the cause and resolve the problem, detailed investigation is required.
Message ID Message Text Description To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM05434-E I/O of XML has failed. I/O of XML has failed. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM05435-E KAPM05436-E An error occurred in the SAX parser.
Message ID Message Text Description may ask you to collect troubleshooting information. KAPM05441-W An attempt to check the result has failed. An attempt to check the result has failed. Confirm the value in the user definition application file. KAPM05442-E The registered information was not found. The registered information was not found. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information.
Message ID Message Text Description The continuation will overwrite the Hitachi Command Suite Common Component database. KAPM05505-E KAPM05506-E KAPM05507-I The aa...aa file does not exist or is not readable. The HiCommand Server database was not altered. The aa...aa file does not exist or is not readable. The Hitachi Command Suite Common Component database was not altered. aa...aa: File name Confirm that aa...aa file exists. Alternatively, check the permission of the aa...aa file. The aa...
Message ID Message Text Description KAPM05512-I Backup has succeeded. Backup has succeeded. KAPM05513-E An attempt to back up has failed. An attempt to back up has failed. KAPM05514-I Restoration has succeeded. Restoration has succeeded. KAPM05515-E An attempt to restore has failed. An attempt to restore has failed. The setup of the specified database is invalid. The setup of the specified database is invalid.
Message ID Message Text Description KAPM05541-I Re-creation of the RD area has ended. Re-creation of the RD area has ended. KAPM05544-E An attempt to back up the database has failed. An attempt to back up the database has failed. Confirm that there are no errors in the directory specification. If there are no errors, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
Message ID Message Text Description aa...aa: File name KAPM05555-E KAPM05556-E An attempt to set the environment variable has failed. An attempt to set the environment variable has failed. An attempt to create the backup file has failed. An attempt to create the backup file has failed. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information.
Message ID Message Text Description KAPM05566-E An attempt to partially restore the database has failed. An attempt to partially restore the database has failed. KAPM05567-E An exception occurred. An exception occurred. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM05568-E aa...aa:bb...bb Message for debugging. aa...aa: Command name bb...bb: Message KAPM05569-E aa...
Message ID Message Text Description To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM05580-I Re-creation of the database has started. Re-creation of the database has started. KAPM05581-I Re-creation of the database has ended. Re-creation of the database has ended. KAPM05582-I Unsetup of aa...aa has started. Unsetup of aa...aa has started. aa...
Message ID KAPM05594-E Message Text aa...aa: File name Confirm that HiRDB is set up. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information. The aa...aa file could not be read. The aa...aa file could not be read. aa...aa: File name KAPM05595-E KAPM05596-E Description Confirm that HiRDB is set up.
Message ID Description KAPM05601-I The acquisition of HiRDB detail logs has started. The acquisition of HiRDB detail logs has started. KAPM05602-I The acquisition of HiRDB detail logs was successful. The acquisition of HiRDB detail logs was successful. KAPM05603-I The acquisition of the HiRDB RDAREA has started. The acquisition of the HiRDB RDAREA has started. KAPM05604-I The acquisition of the HiRDB RDAREA was successful. The acquisition of the HiRDB RDAREA was successful.
Message ID KAPM05612-E Message Text product and the product to be installed.) To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. The version of the specified product could not be acquired. (product name = aa...aa) An attempt to execute the version acquisition function has failed. aa...
Message ID Message Text Description KAPM05619-I The hcmdsppcheck command has ended. The version check function has ended. KAPM05620-I The hcmdsppvrs command was The version acquisition function was successful. successful. KAPM05621-E The hcmdsppvrs command failed. An attempt to execute the version acquisition function has failed. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information.
Message ID Message Text Description To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM05628-I A file already exists at the specified output destination. Upgrade permission file already exists. KAPM05629-E A folder already exists at the specified output destination. A folder already exists at the output destination specified by the version check function.
Message ID KAPM05647-E KAPM05648-E Message Text Description An attempt to acquire the HiCommand Suite Common Component installation path has failed. An attempt to acquire the Hitachi Command Suite Common Component installation path has failed. An attempt to initialize the log has failed. An attempt to initialize the log has failed. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information.
Message ID KAPM05659-E Message Text The program product specified by the type option is invalid. Description The value specified for the type option is invalid. Enter a correct value. KAPM05660-E The user ID specified by the newid option is invalid. The value specified for the newid option is invalid. Enter a correct value. KAPM05661-E The password specified by the newpass option is invalid. The value specified for the newpass option is invalid. Enter a correct value.
Message ID Message Text Description may ask you to collect troubleshooting information. KAPM05678-I The current memory size is aa...aa. The current memory size is displayed. aa...aa: Memory size KAPM05679-E KAPM05680-E The current memory size is unknown. The current memory size is unknown. An option is invalid. An option is invalid. Use the hcmdschgheap command to reset the memory size. Specify a valid option, and then reexecute the command. KAPM05681-E An entered argument is invalid.
Message ID KAPM05689-E Message Text Execution of the hcmdsweb2 command has failed. Description Execution of the hcmdsweb2 command has failed. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM05690-E In Windows x86 version, you cannot specify Large. In Windows x86 version, you cannot specify Large. Specify a valid option, and then reexecute the command.
Message ID KAPM05807-E Message Text The specified value is invalid. (value = aa...aa) aa...aa: Specified value KAPM05808-E KAPM05809-E Specify a valid value. The file aa...aa does not exist. aa...aa: File name Confirm that there are no errors in the file specification. If there are no errors, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information. The directory aa...aa does not exist.
Message ID Message Text Description may ask you to collect troubleshooting information. KAPM05816-E KAPM05817-E An error occurred while executing the hcmdsauthmode command. There is no RD area in the system. An error occurred while executing the hcmdsauthmodecommand. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. There is no RD area in the system.
Message ID Message Text Description See the message KAPMxxxxx-E. KAPM05829-E A fatal error occurred. A fatal error occurred. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM05830-E An attempt to establish a connection has failed. An attempt to establish a connection has failed. To determine the cause and resolve the problem, detailed investigation is required.
Message ID Message Text Description may ask you to collect troubleshooting information. KAPM05840-E The option is invalid. The option is invalid. Specify correct options, and then reexecute the command. KAPM05841-E The option is invalid. Code=[aa...aa], Data=[bb...bb] aa...aa: Generated code The option is invalid. Specify correct options, and then reexecute the command. bb...bb: Generated option and value KAPM05842-I hcmds64banner [aa...aa]{, [bb...bb],......[.....
Message ID Message Text Description may ask you to collect troubleshooting information. KAPM05852-I Setting of the banner message display has been completed. The setting of the banner message has been completed. KAPM05860-W The banner message display has already been cancelled. The banner message has already been deleted. KAPM05861-E An attempt to cancel the banner message display has failed. An attempt to delete the banner message has failed.
Message ID Message Text Description To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM05883-E A fatal error occurred. A fatal error occurred. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information.
Message ID Message Text Description To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM05895-E The registry key that must be acquired does not exist. The registry key that must be acquired does not exist. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information.
Message ID Message Text Description aa...aa: Code indicating generation location bb...bb: Generated option and value KAPM05904-I hcmds64dbtrans [aa...aa]{, [bb...bb],......[.....]} The options specified for the command are displayed. aa...aa: Command line argument bb...bb: Command line argument KAPM05905-E The path specified in the aa...aa option is not an absolute path. aa...aa: Option KAPM05906-E KAPM05909-E KAPM05910-E KAPM05911-E The path specified in the aa...
Message ID KAPM05913-E Message Text Description aa...aa: Product name If the aa...aa data is necessary, install aa...aa, and then re-execute the command. Processing to register aa...aa will stop because it is not installed. Processing to register data will stop because aa...aa, specified in the type option, is not installed. aa...aa: Product name If registration of aa...aa is necessary, install aa...aa and then re-execute the command. If operation is possible without registering the aa...
Message ID KAPM05919-E Message Text Description The hcmds64dbtrans command The hcmds64dbtrans command cannot cannot be executed because be executed because the database is the database is currently in currently in use. use. Stop the Hitachi Command Suite product connected to HiRDB, and then retry the operation. Even after retrying the operation, if the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem.
Message ID Message Text Description Revise the path specified in the workpath option. KAPM05925-E KAPM05926-E The work directory is not empty. The work directory is not empty. The format of the registration data in the work directory is incorrect. A file or directory required by the hcmds64dbtrans command is not in the work directory specified by the workpath option. Specify an empty directory or uncreated directory as the work directory.
Message ID Message Text Description aa...aa: Product name KAPM05933-I The archive file will now be created. The archive file will now be created. KAPM05934-I The archive file has been created. The archive file has been created. KAPM05935-I The archive file will now be extracted. The archive file will now be extracted. KAPM05936-I The archive file has been extracted. The archive file has been extracted. KAPM05937-I aa...aa will now be imported. aa...aa will now be imported. aa...
Message ID Message Text Description Please specify the correct product name, and then re-execute the command. KAPM05956-E The processing of the hcmdsvrsutil library failed. The processing of the version acquisition function failed. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM05957-E There is no registry key for the specified product.
Message ID Message Text Description who may ask you to collect troubleshooting information. KAPM05973-I The hcmdsppvrs command has started. The version acquisition function started. KAPM05974-I The hcmdsppvrs command has ended. The version acquisition function ended. KAPM05975-E A fatal error occurred. A fatal error occurred. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information.
Message ID KAPM05981-E Message Text A folder already exists at the specified output destination. Description The folder already exists at the output destination specified by the version acquisition function. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM05982-E The file-creation function failed. The function that creates the file for writing the version value failed.
Message ID Message Text aa...aa: Version acquisition function return code bb...bb: Version acquisition function error message KAPM05990-E The version file does not exist. (command line = aa...aa) aa...aa: command-line KAPM05991-E The argument is invalid. Description To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. The version file does not exist.
Message ID KAPM06010-E Message Text An attempt to backup of the database has failed. Description An attempt to backup the database has failed. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM06011-E An attempt to restore of the database has failed. An attempt to restore the database has failed. To determine the cause and resolve the problem, detailed investigation is required.
Message ID Message Text Description Confirm that InterBase is running. If InterBase is running, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information. KAPM06019-E An attempt to set up the autocommit function has failed. An attempt to set up the auto-commit function has failed. Confirm that InterBase is running.
Message ID KAPM06024-E Message Text An error occurred during an attempt to read a file. Description An error occurred during an attempt to read a file. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM06025-E An attempt to acquire the database version has failed. An attempt to acquire the database version has failed. Confirm that InterBase is running.
Message ID Message Text Description Restore the repository from a backup file, and then retry the operation. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information. KAPM06032-E An attempt to acquire the database version has failed. An attempt to acquire the database version has failed.
Message ID Message Text Description bb...bb: Version KAPM06038-E An attempt to acquire the user names of users who access the database has failed. An attempt to acquire the user names of users who access the database has failed. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM06039-E The version of the target database is unknown. The version of the target database is unknown.
Message ID Message Text Description To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM06045-I The SQL will now be executed. (SQL = aa...aa) aa...aa: SQL statement KAPM06046-I Processing to upgrade the database version started. (version = aa...aa) This message is displayed when the SQL statement is to be executed during processing to upgrade the database version.
Message ID Message Text Description KAPM06101-I The hcmds64chgurl command successfully ended. The hcmds64chgurl command successfully ended. KAPM06102-E The hcmds64chgurl command abnormally ended. The hcmds64chgurl command abnormally ended. To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information. KAPM06103-I An attempt to back up the database has succeeded.
Message ID Message Text KAPM06116-E CIMException occurred. Description = "aa...aa" aa...aa: Error details KAPM06117-E An unexpected error occurred. Description = "aa...aa" aa...aa: Error details Description CIMException occurred. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. An unexpected error occurred.
Message ID KAPM06140-E Message Text Memory is insufficient. Description Memory is insufficient. Check the memory capacity for the operation environment. If necessary, increase the memory. KAPM06141-E KAPM06142-E The HiRDB environment already exists. Free disk space is insufficient. The HiRDB environment already exists. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information.
Message ID KAPM06159-E Message Text An attempt to acquire a cluster configuration file has failed. Description An attempt to acquire a cluster configuration file has failed. Check the cluster configuration file. KAPM06160-E The value of hcmds.home cannot be acquired. The value of hcmds.home cannot be acquired. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information.
Message ID Message Text Description investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information. KAPM06169-E An attempt to log in as an internal user has failed. An attempt to log in as an internal user has failed. See the next message. KAPM06170-I The hcmds64dbstatus command has started. The hcmds64dbstatus command has started. KAPM06171-I The hcmds64dbstatus command has ended.
Message ID Message Text Description To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM06183-I Command execution results: "aa...aa" Execution result of command. aa...aa: Displayed output of the executed command KAPM06184-E KAPM06185-E An attempt to execute the command has failed. An exception occurred. The execution of the command failed.
Message ID KAPM06191-E Message Text An attempt to set a parameter failed. (file name = aa...aa, key = bb...bb, value = cc...cc) An attempt to acquire, from the file, the parameter value that corresponds to the key failed. aa...aa: File path The file from which the parameter was to be acquired might have been inaccessible when the hcmdsdbsetup command was executed. bb...bb: Key value for setting the value cc...cc: Value corresponding to the key KAPM06192-I Description The command was executed.
Message ID Message Text Description Make sure that InterServer is running. KAPM06216-E KAPM06217-E An argument contains a null value. An argument contains a null value. The option is invalid. The option is invalid. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. To determine the cause and resolve the problem, detailed investigation is required.
Message ID KAPM06224-E Message Text Description aa...aa: Value To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. The specified arguments are insufficient. The specified arguments are insufficient. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information.
Message ID Message Text Description may ask you to collect troubleshooting information. KAPM06232-E An SQL exception occurred. An SQL exception occurred. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM06234-E KAPM06235-E KAPM06239-E A table name in XML is null or 0 bytes. A table name in XML is null or 0 bytes. An unexpected XML tag (aa...aa) has been detected.
Message ID Message Text HiRDB limit. (data type of excessively long data, length) = (aa...aa, bb...bb) aa...aa: Data type of the excessively long data Description To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. bb...bb: Length of the excessively long data KAPM06245-E HiRDB has not started. HiRDB has not started. Please start HiRDB. KAPM06246-I The table aa...aa was successfully created.
Message ID Message Text Description may ask you to collect troubleshooting information. KAPM06255-I Processing to initialize database conversion is being performed. Processing to initialize database conversion is being performed. KAPM06256-E The specified file could not be created. (file = aa...aa) The specified file could not be created. aa...aa: File name KAPM06257-I Data is now being read from the old database. (progress = aa...aa/bb...
Message ID Message Text Description If the file option is not specified, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information. KAPM06268-E The sslc.cnf file is invalid. This message is output when the format of the sslc.cnf file is invalid. Confirm the permissions for the sslc.cnf file or the permissions of the user who executed the command, and then re-execute the command.
Message ID Message Text Description required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM06276-I Processing to create a selfThis message is output when signed certificate in DER format processing to create a self-signed has started. certificate in DER format starts. KAPM06277-I Processing to create a selfThis message is output when signed certificate in DER format processing to create a self-signed has ended. certificate in DER format ends.
Message ID Message Text Description required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM06286-E The private key was not found. The private key was not found in the storage destination after it was created. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM06287-E The self-signed certificate was not found.
Message ID Message Text Description aa...aa: Option name KAPM06306-E KAPM06307-E KAPM06308-E KAPM06309-E The option "aa...aa" appears 2 times or more. The option "aa...aa" appears 2 times or more. aa...aa: Option name Check the specification of the option. The combination of options is invalid. The combination of options is invalid. An argument contains a null value. An argument contains a null value. An exception occurred. An exception occurred.
Message ID KAPM06318-E Message Text An error occurred in the SAX parser. Description An error occurred in the SAX parser. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM06319-I Processing ended normally. KAPM06321-E The "bb...bb" file to be used by The bb...bb file to be used by aa...aa "aa...aa" does not exist. does not exist. aa...aa: Command name, class name, etc.
Message ID Message Text Description aa...aa: Method name KAPM06332-E The database of the specified product has not been set up. The database of the specified product has not been set up. Use the hcmdsdbsetup command to set up the database of the specified product. KAPM06333-E KAPM06334-E HiRDB cannot be stopped because a Suite product is connected to HiRDB. HiRDB cannot be stopped because a Suite product is connected to HiRDB. InterBase is not running. InterBase is not running.
Message ID KAPM06344-E Message Text The port is already being used. Description The port is already being used. Check hcmdsdbinitsetup[n].log. KAPM06345-E KAPM06346-E An unexpected exception occurred. An unexpected exception occurred. The file "aa...aa" already exists. The file aa...aa already exists. aa...aa: File name KAPM06347-W The specified file system area "aa...aa" already existed, so it was deleted. Check hcmdsdbinitsetup[n].log. If the target file is hcmdsdbsetRDArea.
Message ID Message Text Description prmfile option, and then re-execute the command. KAPM06355-W Database unsetup processing failed. (product name = aa...aa) aa...aa: Product name This message is output when unsetup fails for the product specified in the type option of the hcmdsdbsetupcommand. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information.
Message ID Message Text Description KAPM06368-I The service is now being paused. The service is now being paused. KAPM06369-I The service is paused. The service is paused. KAPM06370-I The service does not exist. The service does not exist. KAPM06371-W The service is disabled. The service is disabled. KAPM06372-W Acquisition of the service status Acquisition of the service status failed. failed. KAPM06373-W The service status is currently unknown. The service status is currently unknown.
Message ID Message Text Description KAPM06405-I Processing ended normally. KAPM06407-E The "bb...bb" file to be used by The bb...bb file to be used by aa...aa "aa...aa" does not exist. does not exist. aa...aa: Command name, class name, etc. bb...bb: Name of the file that does not exist KAPM06408-I Execution of the "aa...aa" command ended normally. Processing ended normally. To determine the cause and resolve the problem, detailed investigation is required.
Message ID Message Text Description Please review the specification of the option. KAPM06438-I The HiRDB service has started. The HiRDB service has started. KAPM06439-I The HiRDB service has stopped. The HiRDB service has stopped. KAPM06440-I The HiRDB service has already started. The HiRDB service has already started. KAPM06441-I The HiRDB service has already stopped. It is already stopped by HiRDB service. KAPM06442-E The HiRDB service has not been set up.
Message ID Message Text Description detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information. KAPM06459-E An unexpected exception occurred. An unexpected exception occurred. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information.
Message ID Message Text Description KAPM06502-I The method has finished. The method has finished. KAPM06503-E The option is invalid. The option is invalid. Specify the option correctly. KAPM06504-E KAPM06505-E A specified option is insufficient. A specified option is insufficient. The value specified in the option is invalid. (option = aa...aa) The value specified in the option is invalid. aa...aa: Option name KAPM06506-E KAPM06507-E KAPM06508-E The specified directory cannot be created.
Message ID Message Text bb...bb: Return code Description cc...cc: Error message required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information. KAPM06514-I Processing ended normally. Processing ended normally. KAPM06515-E An IOException occurred. (details = aa...aa) An IOException occurred. aa...aa: Exception details KAPM06516-E An exception occurred. (details = aa...aa) aa...
Message ID Message Text Description KAPM06524-I Initialization for moving the database is being performed. Initialization for moving the database is being performed. KAPM06525-I The data for aa...aa will now be The data for aa...aa will now be moved. moved. aa...aa: Product name KAPM06526-I Processing to import data has started. Processing to import data has started. KAPM06527-I The table definitions of the database are being imported. The table definitions of the database are being imported.
Message ID Message Text Description Please check that the data to be imported exists in the directory specified by the datapath option. Also, if import data of multiple products exists in different directories, specify the type option, and then import the data for each product one product at a time. KAPM06543-I The database was exported successfully. The database was exported successfully. KAPM06544-E An attempt to export the database has failed. An attempt to export the database has failed.
Message ID KAPM06571-E Message Text The specified options are insufficient. Description This message is displayed when a required option is not specified or an unnecessary option is specified. Specify a valid option, and then try again. KAPM06572-E The specified option value is invalid. This message is displayed when the specified value of the option is invalid. Specify a valid option value, and then try again. KAPM06573-E The specified directory name already exists as a file name. (file name = aa...
Message ID KAPM06580-E Message Text An attempt to clear a DBMS environment variable has failed. Description This message is displayed when an attempt to delete the DBMS client environment variable has failed. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM06581-E The DBMS has not stopped. This message is displayed when the DBMS did not stop when the command was executed.
Message ID Message Text Description Support Center, who may ask you to collect troubleshooting information. KAPM06589-E An attempt to import data has failed. This message is displayed when an attempt to import data has failed. Remove the cause of the failure, and then try again. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
Message ID KAPM06604-E Message Text The database has not started. Description The database has not started. Make sure the database has started. KAPM06605-E An attempt to communicate An attempt to communicate with the with the server or database has server or database has failed. failed. Make sure the following have started: the HBase Storage Mgmt Common Service or HBase Storage Mgmt Web Service, and the database. KAPM06606-E An error has occurred. An error has occurred.
Message ID Message Text Description primary side is not running, start it, and then restart the single sign-on server on the secondary side. If the single sign-on server on the primary side is running, make sure that the single sign-on server on the secondary side is running. 2. For a non-distributed environment: Make sure that the single sign-on server is running. 3. KAPM06640-E A fatal error occurred during processing.
Message ID Message Text Description bb...bb: Problematic option and its value KAPM06645-I hcmdsdbpath [aa...aa]{, [bb...bb],......[.....]} The options specified for the command are displayed. aa...aa: Command line argument bb...bb: Command line argument KAPM06654-E The specified backup directory is invalid. Path=[aa...aa], Code=[bb...bb] aa...aa: Path to the backup directory bb...bb: Code indicating the error location KAPM06659-E aa...aa aa...
Message ID KAPM06673-E Message Text Description aa...aa: Command name To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. The DBMS did not start. The DBMS did not start. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM06674-E The DBMS did not stop.
Message ID Message Text Description To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM06692-W Execution of the command aa...aa has failed. aa...aa: Command name Execution of the command has failed. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information.
Message ID Message Text Description required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM06709-E An internal error occurred. An internal error occurred. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM06710-I The service is stopped. The service is stopped. KAPM06711-I The service is running. The service is running.
Message ID Message Text Description KAPM06761-I A method has finished. A method has finished. KAPM06762-I The hcmds64ssltool command has started. The hcmds64ssltool command has started. KAPM06763-I The hcmds64ssltool command has ended. The hcmds64ssltool command has ended. KAPM06764-I The hcmds64ssltool command ended successfully. The hcmds64ssltool command ended successfully. KAPM06765-E An option is invalid. An option is invalid. Check the options.
Message ID Message Text Description problem. Contact the Support Center, who may ask you to collect troubleshooting information. KAPM06770-E An internal error occurred. An internal error occurred. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM06771-W Failed to delete a key store. Failed to delete a key store.
Message ID KAPM06782-I Message Text Enter Organization Name [default=aa...aa]: Description Enter Organization Name. aa...aa: Host name KAPM06783-I Enter your City or Locality: Enter your City or Locality: KAPM06784-I Enter your State or Province: Enter your State or Province. KAPM06785-I Enter your two-character country-code: Enter your two-character countrycode. KAPM06786-I Is aa...aa correct? (y/n) [default=n]: The Distinguished Name is confirmed. aa...
Message ID KAPM06795-E KAPM06796-E Message Text Description A CertificateException occurred. A CertificateException occurred. An UnrecoverableKeyException occurred. An UnrecoverableKeyException occurred. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. To determine the cause and resolve the problem, detailed investigation is required.
Message ID Message Text Description may ask you to collect troubleshooting information. KAPM06909-E An attempt to stop the service has failed. This message is displayed when an attempt to stop the service fails. Stop any suite products connected to the DBMS, and then retry the operation. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
Message ID Message Text Description To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM06915-E An attempt to release the connection of the connection pool has failed. This message is displayed when an attempt to release the connection of the connection pool fails. To determine the cause and resolve the problem, detailed investigation is required.
Message ID Message Text Description may ask you to collect troubleshooting information. KAPM06925-E A system environment variable is invalid. A system environment variable was invalid. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM06926-E The aa...aa command will stop because setting an environment variable failed. (details = bb...bb) aa...aa: Command name bb...
Message ID Message Text Description KAPM07004-E The executing user does not The executing user does not have have permission to execute the permission to execute the method. method. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM07005-E The specified user does not exist. The specified user does not exist. The specified user already exists. The specified user already exists.
Message ID Message Text Description To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM07014-E An attempt to update user information has failed, because a problem occurred during update processing. An attempt to update user information has failed, because a problem occurred during update processing.
Message ID KAPM07021-E Message Text Description A problem occurred during an A problem occurred during an attempt attempt to acquire HiCommand to acquire Hitachi Command Suite application information. application information. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information.
Message ID Message Text A character that cannot be used for this entry has been entered. Description Use only characters that are valid for this item. aa...aa: Input item KAPM07030-E Input Item:aa...aa The number of characters in this entry exceeds the maximum. The number of characters in this entry exceeds the maximum. Input a character string of a length less than or equal to the maximum. aa...aa: Input item KAPM07031-E KAPM07032-E The password entries do not match.
Message ID KAPM07230-I Message Text The user was registered successfully. (operator = aa...aa, user ID = bb...bb, function = cc...cc) Description This is an audit log showing that the user has been registered successfully. aa...aa: Operator name bb...bb: Processed user ID cc...cc: Function name KAPM07231-I The user was deleted successfully. (operator = aa...aa, user ID = bb...bb, function = cc...cc) This is an audit log showing that the user has been deleted successfully. aa...aa: Operator name bb...
Message ID Message Text Description aa...aa: Operator name bb...bb: Processed user ID cc...cc: Function name KAPM07238-E The specified e-mail is too long. (operator = aa...aa, user ID = bb...bb, function = cc...cc) This is an audit log that shows that the e-mail string that is too long is specified. aa...aa: Operator name bb...bb: Processed user ID cc...cc: Function name KAPM07239-E The old password is incorrect. (operator = aa...aa, user ID = bb...bb, function = cc...
Message ID Message Text Description aa...aa: User ID KAPM07247-I The authorization group was This is an audit log that shows all the added successfully. (operator = authorization groups that have been aa...aa, distinguished name = added successfully. bb...bb, function = cc...cc) aa...aa: Operator name bb...bb: Distinguished name cc...cc: Function name KAPM07248-E An attempt to execute the aa...aa operation has failed. (operator = bb...bb, distinguished name = cc...cc, function = dd...
Message ID KAPM07254-E Message Text An attempt to delete the authorization group has failed. (distinguished name = aa...aa) Description This is an audit log that shows all the authorization groups that have failed to be deleted. aa...aa: Distinguished name KAPM07255-I The authorization group's permissions were changed successfully. (distinguished name = aa...aa) This is an audit log that shows all the authorization group permissions that have been changed successfully. aa...
Message ID KAPM07261-I Message Text Description The resource group was This audit log entry shows that the successfully updated. (resource resource group was successfully group name = aa...aa, device updated. type = bb...bb, device number = cc...cc) aa...aa: Resource group name bb...bb: Device type cc...cc: Device number KAPM07262-E Updating of the resource group This audit log entry shows that failed. (resource group name = updating of the resource group failed. aa...aa, device type = bb...
Message ID KAPM07267-I Message Text The user group was successfully updated. (user group name = aa...aa, device type = bb...bb, device number = cc...cc) Description This audit log entry shows that the user group was successfully updated. aa...aa: User group name bb...bb: Device type cc...cc: Device number KAPM07268-E Updating of the user group failed. (user group name = aa...aa, device type = bb...bb, device number = cc...cc) This audit log entry shows that updating of the user group failed. aa...
Message ID Message Text Description device type = bb...bb, device number = cc...cc) aa...aa: Role name bb...bb: Device type cc...cc: Device number KAPM07274-E Updating of the role failed. (role name = aa...aa, device type = bb...bb, device number = cc...cc) This audit log entry shows that updating of the role failed. aa...aa: Role name bb...bb: Device type cc...cc: Device number KAPM07275-I The user account was successfully assigned to the user group. (user group name = aa...aa, user ID = bb...
Message ID Message Text Description bb...bb: Resource group name cc...cc: Role name KAPM07280-E Assignment processing failed for a user group and an external authentication group, a resource group, and a role. (user group name and external authentication group name = aa...aa, resource group name = bb...bb, role name = cc...cc) This audit log entry shows that assignment processing failed for the following: • A user group and an external authentication group • A resource group • A role aa...
Message ID Message Text Description KAPM07310-I Importing of the certificate has started. Importing of the certificate started. KAPM07311-I Importing of the certificate has ended. Importing of the certificate ended. KAPM07312-E The host name or the port number is invalid. The host name is invalid. An attempt to communicate with the HPSIM server has failed. Communication with the HPSIM server failed. The format of the certificate acquired from the HPSIM server is invalid.
Message ID Message Text Description KAPM07322-I Processing to display the certificate list has ended. Processing to display the certificate list ended. KAPM07323-I The certificate is not stored. The certificate is not stored. KAPM07324-E A problem occurred while displaying the certificate list. A problem occurred while displaying the certificate list. To determine the cause and resolve the problem, detailed investigation is required.
Message ID Message Text Description KAPM07344-I GET processing for "/Proxy/ Getkey" has started. The GET processing of "/Proxy/ GetKey" started. KAPM07345-I GET processing for "/Proxy/ Getkey" has ended. The GET processing of "/Proxy/ GetKey" ended. KAPM07346-I The request from "aa...aa" was accepted. The request from aa...aa was accepted. aa...aa: Host name KAPM07347-I The one-time key was issued. (key = aa...aa) The one-time key was issued. (key = aa...aa) aa...
Message ID Message Text Description may ask you to collect troubleshooting information. KAPM07359-I Parameter output: "aa...aa" = "bb...bb" Parameter output: aa...aa = bb...bb aa...aa: Parameter bb...bb: Value KAPM07360-E An attempt to load the keystore has failed. An attempt to load the keystore has failed. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information.
Message ID Message Text KAPM07379-E An attempt to load the keystore file has failed. Description An attempt to load the keystore file has failed. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM07380-I The certificate of aa...aa has been imported. The aa...aa certificate has been imported. aa...aa: Alias KAPM07381-E KAPM07382-E The certificate of aa...aa has not been imported.
Message ID KAPM07389-E Message Text "US-ASCII" is not supported. Description "US-ASCII" is not supported. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM07390-I Generation of the HSSO token has started. Generation of the HSSO token started. KAPM07391-I Generation of the HSSO token has ended. Generation of the HSSO token ended.
Message ID KAPM07406-E Message Text Description The format of the certificate The format of the certificate acquired acquired from HPSIM is invalid. from HPSIM is invalid. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM07407-E An attempt to output the keystore file has failed. An attempt to output the keystore file has failed.
Message ID Message Text Description To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM08002-E KAPM08003-E KAPM08004-E Illegal parameters have been specified to create HSSO Context. Illegal parameters have been specified to create HSSO Context. A CIMException was generated during Console screen display processing. A CIMException was generated during Console screen display processing.
Message ID KAPM08008-E Message Text Description An error occurred on the HSSO Server. An error occurred on the HSSO Server. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM08009-I The logout process has completed. The logout process has completed. KAPM08010-E An internal error occurred. An internal error occurred.
Message ID KAPM08020-E Message Text An attempt to communicate with the SSO server has failed. Description An attempt to communicate with the SSO server has failed. Logout, and then login again. KAPM08021-E The DBMS is stopped. The DBMS is stopped. Make sure the DBMS has started. KAPM08022-E The Common Component database is blocked. The Common Component database is blocked. Please contact the server administrator. KAPM08100-E KAPM08101-E Null is specified for the argument.
Message ID KAPM08106-E Message Text The tree information cannot be acquired. (aa...aa) The tree information cannot be acquired. aa...aa: Node key To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM08107-E The node information is invalid. The node information is invalid. (aa...aa, bb...bb) To determine the cause and resolve aa...
Message ID Message Text Description required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM08114-W An invalid argument was specified during node creation. (aa...aa, bb...bb) bb...bb: Acquired value To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. An internal error occurred. An internal error occurred. aa...
Message ID KAPM08200-E Message Text The request parameter required for the display of the Application Bar area is invalid. Description The request parameter required for the display of the Application Bar Area is invalid. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM08201-E An internal error occurred. An internal error occurred.
Message ID KAPM08304-E Message Text An attempt to access the resource file has failed. Description An attempt to access the resource file has failed. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM08308-E An internal error occurred. An internal error occurred. To determine the cause and resolve the problem, detailed investigation is required.
Message ID Message Text Description In Linux: Hitachi-Command-SuiteCommon-Component-installationdirectory/Base/conf/sec/ resource 2. Delete the following folder if it exists: In Windows: Hitachi-CommandSuite-Common-Componentinstallation-directory\Base\conf \sec\resource \bannerresource.properties In Solaris: /opt/HiCommand/Base/ conf/sec/resource/ bannerresource.properties In Linux: Hitachi-Command-SuiteCommon-Component-installationdirectory/Base/conf/sec/ resource/ bannerresource.properties 3.
Message ID Message Text Description \sec\resource \bannerresource.properties In Solaris: /opt/HiCommand/Base/ conf/sec/resource/ bannerresource.properties In Linux: Hitachi-Command-SuiteCommon-Component-installationdirectory/Base/conf/sec/ resource/ bannerresource.properties 2. KAPM08406-E The specified file name already exists as a directory name. (directory name = aa...aa) aa...aa: Directory name KAPM08407-E The specified directory name already exists as a file name. (file name = aa...aa) aa...
Message ID Message Text Description Hitachi-Command-Suite-CommonComponent-installation-directory/ Base/conf/sec KAPM08409-E An attempt to delete the warning banner message has failed. This message is output to the log when an attempt to delete a warning banner message from the security GUI window fails. Check that the following file exists: Windows: Hitachi-Command-Suite-CommonComponent-installation-directory\Base \conf\sec\resource \bannerresource.
Message ID Message Text Description Hitachi-Command-Suite-CommonComponent-installation-directory/ Base/conf/sec/bannertaglist.conf KAPM08431-E An attempt to register the security settings information has failed. When failing from security GUI screen to the security configuration registration will be displayed. Perform the following procedure: 1.
Message ID Message Text Description to collect troubleshooting information. KAPM08910-E An exception occurred. An exception occurred. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM08911-E A fatal error occurred during processing. A fatal error occurred during processing. To determine the cause and resolve the problem, detailed investigation is required.
Message ID KAPM08918-E Message Text Failed to start service. Description An attempt to start the service has failed. To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information. KAPM08919-E Failed to stop service. An attempt to stop the service has failed. To determine the cause and resolve the problem, detailed investigation is required.
Message ID Message Text Description ServerName directive of the httpsd.conf file. • Check that the host name in the ServerName directive of the httpsd.conf file can be resolved to an IP address. • Check that the host name specified in the ServerName directive of the httpsd.conf file is the same as the Common Name of the certificate specified in the SSLCertificateFile directive.
Message ID Message Text Description Support Center, who may ask you to collect troubleshooting information. KAPM09065-E The file format is invalid. The file format is invalid. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM09066-E An error occurred during file I/O processing. An error occurred during file I/O processing.
Message ID KAPM09091-E Message Text An error occurred during reading of a library. library path = aa...aa aa...aa: library path KAPM09092-E A timeout was generated during lock acquisition. Description An error occurred during reading of a library. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. A timeout was generated during lock acquisition. Retry execution.
Message ID KAPM09104-E Message Text Description The value entered the first time The value entered the first time does does not match the value not match the value entered the entered the second time. second time. Enter valid values. KAPM10000 - KAPM19999 The following table describes messages KAPM10000 to KAPM19999, which are related to Hitachi Command Suite Common Component.
Message ID KAPM10016-E Message Text A DNS error has occurred. (distinguished name = aa...aa, domain name = bb...bb) Description A DNS error has occurred. Revise the DNS settings. aa...aa: distinguished-name bb...bb: domain-name KAPM10017-W The length of the specified distinguished name is invalid. (line number = aa...aa, distinguished name = bb...bb) aa...aa: line number The length of the specified distinguished name is invalid. Revise the length of specified distinguished name. bb...
Message ID Message Text Description authentication server, and then grant the proper permissions to the group. KAPM10034-E No groups that the user belongs to exist. (user name = aa...aa) aa...aa: User name No groups that the user belongs to exist. Add the user to an appropriate group on the external authentication server. KAPM10035-E The format of the specified The format of the specified Distinguished Name is invalid. Distinguished Name is invalid. (Distinguished Name = aa...
Message ID Message Text Description investigation is required to determine the cause and resolve the problem. Contact the support center, who may ask you to collect troubleshooting information. KAPM10044-E Authentication of the JP1 token Authentication of the JP1 token failed. failed. (JP1 token = aa...aa) To determine the cause and resolve aa...aa: JP1 token the problem, detailed investigation is required. Contact the support center, who may ask you to collect troubleshooting information.
Message ID Message Text Description aa...aa: Value KAPM10050-E Acquisition of the JP1/Base version failed. Acquisition of the JP1/Base version failed. Verify that JP1/Base on the primary server is running properly. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the support center, who may ask you to collect troubleshooting information.
Message ID Message Text Description ask you to collect troubleshooting information. KAPM10057-W The format of the value is invalid. (value = aa...aa) The format of the value is invalid. aa...aa: Value KAPM10058-W The permissions do not The permissions do not correspond to correspond to the suite product the suite product permissions. permissions. (permissions = aa...aa) aa...aa: Permissions KAPM10059-W The permissions could not be converted to suite product permissions. (permissions = aa...
Message ID Message Text Description investigation is required to determine the cause and resolve the problem. Contact the support center, who may ask you to collect troubleshooting information. KAPM10065-E Authentication of the JP1 token Authentication of the JP1 token failed. failed. (JP1 token = aa...aa) To determine the cause and resolve aa...aa: JP1 token the problem, detailed investigation is required. Contact the support center, who may ask you to collect troubleshooting information.
Message ID Message Text Description ee...ee: BaseDN KAPM10103-E Acquisition of group information failed. (userId = aa...aa, domain name = bb...bb, host = cc...cc, port = dd...dd, protocol = ee...ee, basedn = ff...ff) Acquisition of group information has failed. Revise the settings in the configuration file for the external authentication server (exauth.properties). aa...aa: User ID bb...bb: Domain name cc...cc: Host dd...dd: Port ee...ee: Protocol ff...
Message ID Message Text Description configuration file for the (exauth.properties) or a search user external authentication server setting is invalid. (exauth.properties) or a search Revise the exauth.properties file or user setting is invalid. the search user definition. KAPM10115-E The Kerberos realm, KDC, or a The Kerberos realm, KDC, or a search search user definition is invalid. user definition is invalid. (realm name = aa...aa) Check and, if necessary, revise the aa...aa: realm-name exauth.
Message ID KAPM10121-E Message Text Communication with the Kerberos server failed to be established. (KDC = aa...aa) aa...aa: KDC Description Information output to the audit log indicating that communication with the Kerberos server failed to be established. KAPM10122-I Communication with the DNS server was successfully established. Information output to the audit log indicating that communication with the DNS server was successfully established.
Message ID KAPM10128-I Message Text Description A user was successfully Information output to the audit log authenticated by the directory indicating that a user was successfully server. (user ID = aa...aa, host authenticated by the directory server. = bb...bb, port = cc...cc, protocol = dd...dd) aa...aa: User ID bb...bb: Host name cc...cc: Port number dd...dd: Protocol KAPM10129-W No users are registered on the directory server. (user ID = aa...aa, host = bb...bb, port = cc...cc, protocol = dd...
Message ID KAPM10133-I Message Text A user was successfully authenticated by the Kerberos server. (Kerberos principal = aa...aa, KDC = bb...bb) Description Information output to the audit log indicating that a user was successfully authenticated by the Kerberos server. aa...aa: Kerberos principal name bb...bb: KDC KAPM10134-W A user failed to be authenticated by the Kerberos server. (Kerberos principal = aa...aa, KDC = bb...
Message ID Message Text Description KAPM10139-I JP1/Base was successfully connected to. This audit log entry reports that JP1/ Base was successfully connected to. KAPM10140-E An attempt to connect to JP1/ Base failed. This audit log entry reports that an attempt to connect to JP1/Base failed. KAPM10141-I User authentication in JP1/Base This audit log entry reports that user was successful. (aa...aa = authentication in JP1/Base was bb...bb) successful. aa...aa: Key bb...
Message ID KAPM14005-E Message Text Command execution failed. Description Command execution failed. See the message KAPMxxxxx-E. KAPM14006-E An option is invalid. An option is invalid. Check and, if necessary, revise the specified options. KAPM14007-E KAPM14008-E The command cannot be The command cannot be executed executed because the database because the database is down. is down. Make sure of the following, and then retry the command: Command execution failed. (command name = aa...aa) aa...
Message ID KAPM14014-E Message Text Description The value of hcmds.home could The value of hcmds.home could not be not be acquired. acquired. To determine the cause and resolve the problem, detailed investigation is required. Contact the Support Center, who may ask you to collect troubleshooting information. KAPM14015-E An attempt to delete the product information has failed. (product name = aa...aa) aa...aa: product name KAPM14016-E An attempt to delete the association information has failed.
Message ID Message Text Description required.Contact Support Center, who may ask you to collect troubleshooting information. KAPM14022-E An error occurred during DBMS An error occurred during DBMS access access processing. processing. To determine the cause and resolve the problem, detailed investigation is required.Contact Support Center, who may ask you to collect troubleshooting information. KAPM14030-I The hcmdsServiceCtrl command started. The hcmdsServiceCtrl command started.
Message ID Message Text Description KAPM14040-E The service is running. (service The service is running. name = aa...aa) To determine the cause and resolve aa...aa: Service name the problem, detailed investigation is required. Contact customer support, who may ask you to collect troubleshooting information. KAPM14041-I The service operation was executed. (operation name = aa...aa) The service operation was executed. aa...aa: Operation name KAPM15002-I The hcmds64checkauth command will now start.
Message ID KAPM15011-I Message Text The server aa...aa can be connected to normally. Description The connection to the server has been checked successfully. aa...aa: Server name KAPM15012-E KAPM15013-E The result of checking the connection to the server aa...aa indicated an error. An attempt to check the connection to the server has failed. aa...aa: Server name Refer to error message KAPM15010-I and the related messages that follow it. A connection error occurred. A connection error occurred.
Message ID Message Text Description authentication server and the secret set for the client. KAPM15014-E 3. Make sure that the network is correctly connected. 4. Check the firewall settings. 5. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information. An authentication error occurred. An authentication error occurred.
Message ID KAPM15022-W Message Text Description An optional parameter has An optional parameter has been been omitted. (value = aa...aa) omitted. (value = aa...aa) aa...aa: Value KAPM15023-W KAPM15024-E A property key cannot be identified. (line number = aa...aa) A property key cannot be identified. aa...aa: Line number Check and, if necessary, review the settings in the configuration file for the external authentication server. A secret does not exist. A secret does not exist.
Message ID Message Text aa...aa: Server name Description Perform one of the following procedures: For LDAP: 1. Confirm whether the authentication server can be accessed by using the host, port, and protocol set in exauth.properties, and check the settings of the external authentication server and the status of the network. 2. Use the hcmds64ldapuser command to confirm that the information for the server names specified for the auth.server.name attribute in exauth.properties is registered. 3.
Message ID Message Text Description aa...aa: Server name Use the hcmds64ldapuser command or the hcmds64radiussecret command to reconfigure the authentication information. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information. KAPM15035-I Authentication information has been acquired. Authentication information has been acquired.
Message ID Message Text Description 6. If an OCSP is enabled, check the following: - Make sure that the certificate is valid. 7. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information. For RADIUS: KAPM15041-E Authentication has failed. (server name = aa...aa) aa...aa: Server name KAPM15042-E A syntax error occurred. (server name = aa...aa) aa...
Message ID KAPM15046-E Message Text Description aa...aa: Key Specify the value of the parameter aa...aa, and then retry the operation. An invalid value has been specified for a parameter. (key = aa...aa) An invalid value has been specified for a parameter. aa...aa: Key If necessary, revise the value of the parameter aa...aa, and then retry the operation. KAPM15047-I The authentication method will now be internal authentication. The authentication method will now be internal authentication.
Message ID Message Text Description correct, and then re-execute the command hcmds64ldapuser. For LDAP flat model: Using the hcmds64ldapuser command, confirm that the information for the server name specified to the auth.server.name attribute of exauth.properties is not registered. KAPM15052-E Authentication of the specified user has failed. Authentication of the specified user failed.
Message ID Message Text Description 7. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information. For RADIUS: KAPM15053-E The specified user was not found. 1. Make sure that the user is specified correctly. 2. Make sure that the password for the specified user is correct. 3.
Message ID Message Text Description auth.server.name attribute in exauth.properties is registered. - Make sure that the user account used for information searching has the necessary permissions. KAPM15054-E The specified user was not found. (error code = aa...aa) aa...aa: Error code 5. If an LDAP flat model is used, use the hcmds64ldapuser command to confirm that the information for the server name specified for the auth.server.name attribute of exauth.properties is not registered. 6.
Message ID Message Text Description confirm that the information for the server name specified for the auth.server.name attribute of exauth.properties is not registered. • KAPM15056-E The specified user was not found. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information. The specified user was not found. Perform the following: 1.
Message ID Message Text Description aa...aa: Key bb...bb: Value KAPM15059-E aa...aa aa...aa: Error code details This message displays details of the previous error message. Take action according to the preceding message. KAPM15060-I The file targeted for generation The file specified by the command was management was successfully saved successfully. saved. KAPM15061-E No file targeted for generation management exists. The file specified by the command does not exist.
Message ID Message Text Description Support Center, who may ask you to collect troubleshooting information. KAPM15066-W The specified number of generations exceeds the maximum (99). The value of the option that specifies the number of generations exceeds the maximum. Specify a value from 2 to 98 for the number of generations. KAPM15067-E Creation of the directory has failed. Creation of the directory has failed.
Message ID KAPM15074-E Message Text The value specified for an option is invalid. Description This message indicates that the value specified for an option is invalid. Revise the values specified for the options. KAPM15080-E Authentication of the user account used for information searching has failed. (server name = aa...aa) Authentication of the user account used for information searching failed. aa...
Message ID Message Text Description authentication server and is enabled. 4. Check, and if necessary, revise the values of basedn and attr for the corresponding server in exauth.properties. 5. If an LDAP hierarchical structure model is used, check the following: - Using the hcmds64ldapuser command, confirm that the information for the server name specified to the auth.server.name attribute of exauth.properties is registered.
Message ID Message Text Description be specified using only the user name, not the DN format. 2. Make sure that the specified user is registered in the external authentication server and is enabled. 3. Check and, if necessary, revise the values of basedn and attr in exauth.properties for the corresponding server. 4. If an LDAP hierarchical structure model is used, do the following: - Use the hcmds64ldapuser command to confirm that the information for the server names specified for the auth.server.
Message ID Message Text Description the corresponding server in exauth.properties. 3. If an LDAP hierarchical structure model is used, check the following: - Using the hcmds64ldapuser command, confirm that the information for the server name specified to the auth.server.name attribute of exauth.properties is registered. - Make sure the user who is used for searching for information has the correct permissions. KAPM15087-E A dn value is invalid. (server name = aa...aa) A dn value is invalid. aa...
Message ID KAPM15095-E KAPM15096-E Message Text The results of the individualrealm check include abnormal values. The results of the individual-realm check include abnormal values. The same value already exists. (line number = aa...aa, value = bb...bb) The same value already exists. aa...aa: Line number bb...bb: Value KAPM15097-E KAPM15098-I Description See the message KAPMxxxxx-E. There are duplicate bb...bb values on line aa...aa.
Message ID Message Text Description required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM15111-E A command option is invalid. A command option is invalid. Check the options. KAPM15112-E No value has been specified for No value has been specified for an an option. option. Check the options. KAPM15113-E A fatal error occurred. A fatal error occurred. To determine the cause and resolve the problem, detailed investigation is required.
Message ID Message Text Description may ask you to collect troubleshooting information. KAPM15120-E An exception occurred. An exception occurred. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM15170-E Acquisition of the installation path has failed. Acquisition of the installation path has failed. To determine the cause and resolve the problem, detailed investigation is required.
Message ID Message Text aa...aa: Function bb...bb: Error code KAPM15200-I A connection was successfully established. (KDC = aa...aa) Description To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. A connection was successfully established. aa...aa: KDC KAPM15201-E An attempt to connect failed. (KDC = aa...aa) aa...aa: KDC KAPM15202-E An attempt to connect to the DNS server failed.
Message ID Message Text Description may ask you to collect troubleshooting information. KAPM15205-E The KDC resolution failed. (KDC = aa...aa) aa...aa: KDC KAPM15206-E An attempt to authenticate failed. (KDC = aa...aa) aa...aa: KDC KAPM15207-E The specified user was not found. (KDC = aa...aa) aa...aa: KDC KAPM15208-E The specified password is invalid. (KDC = aa...aa) aa...aa: KDC KAPM15209-E The time difference between servers exceeds the specified value in exauth.properties. (KDC = aa...aa) aa.
Message ID Message Text Description KAPM15214-E The command cannot be executed on the secondary server. The command cannot be executed on the secondary server. KAPM15215-E Creation of the file failed. (file name = aa...aa) Creation of the file failed. (file name = aa...aa) aa...aa: File name Perform one of the following procedures: KAPM15216-E A syntax error occurred. • Make sure the file path is correct. • Make sure you have permission to create a file on the specified path.
Message ID Message Text aa...aa: Realm name KAPM15223-E KAPM15224-W KAPM15225-W Perform one of the following procedures: • Make sure that the realm name is correct. • Make sure that there is a KDC corresponding to the realm name. An unexpected error occurred. (KDC = aa...aa) An unexpected error occurred. (KDC = aa...aa) aa...aa: KDC Retry execution. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem.
Message ID Message Text Description aa...aa: Property name bb...bb: Property value cc...cc: Host name dd...dd: Port number ee...ee: Protocol KAPM15230-I Group acquisition was successful. Group acquisition was successful. KAPM15231-E Group acquisition failed. Group acquisition failed. Perform one of the following actions: KAPM15232-E The group was not registered. • Make sure that the specified user is registered in a group.
Message ID Message Text Description specified for the auth.server.name attribute in exauth.properties is registered. KAPM15236-E KAPM15237-I 3. If StartTLS is used, check the SSL settings. 4. If an OCSP is enabled, make sure that the certificate is valid. 5. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information.
Message ID Message Text Description bb...bb: Property value KAPM15242-E An unexpected error occurred on the DNS server. (aa...aa = bb...bb) aa...aa: Property name bb...bb: Property value KAPM15243-E KAPM15244-I An unexpected error occurred on the DNS server. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. The common items cannot be checked because they are not set correctly.
Message ID Message Text Description For RADIUS: KAPM15247-E 1. Make sure that the host or IP address, port, and protocol specified in exauth.properties are correct. 2. Check and then respecify the client secret set for the external authentication server and the secret set for the client. 3. Make sure that the network is correctly connected. 4. Check the firewall settings. 5. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem.
Message ID Message Text Description attribute of exauth.properties is not registered. KAPM15249-E Authentication of the specified user has failed. (aa...aa = bb...bb) Authentication of the specified user failed. aa...aa: Property name Perform one of the following procedures: bb...bb: Property value For LDAP: 1. Make sure that the user is specified correctly. The user must be specified using only the user name, not the DN format. 2. Make sure that the password for the specified user is correct.
Message ID KAPM15250-E Message Text Description 3. Make sure that the specified user is registered in the external authentication server and is enabled. 4. Make sure that the PAP and CHAP settings are valid. 5. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information. The specified user was not found. (aa...aa = bb...bb) The specified user was not found.
Message ID KAPM15251-E Message Text Description The specified user was not found. (aa...aa = bb...bb) The specified user was not found. aa...aa: Property name 1. Make sure that the specified user is registered in the external authentication server. 2. Check, and if necessary, revise the basedn and attr values for the corresponding server in exauth.properties. 3. If an LDAP hierarchical structure model is used, check the following: bb...
Message ID Message Text Description Verify that JP1/Base on the primary server is running properly. If the problem cannot be resolved, detailed investigation is required to determine the cause and resolve the problem. Contact the support center, who may ask you to collect troubleshooting information. KAPM15256-E An attempt to connect to JP1/ Base failed. An attempt to connect to JP1/Base failed. Verify that JP1/Base on the primary server is running properly.
Message ID KAPM15264-E KAPM15265-E Message Text Description Permissions have not been assigned to the user in JP1/ Base. Permissions have not been assigned to the user in JP1/Base. JP1/Base is not installed. JP1/Base is not installed. Assign permissions to the user from JP1/Base. Install JP1/Base on the primary server. KAPM15266-E KAPM15267-E Acquisition of user permission information from JP1/Base failed. Acquisition of user permission information from JP1/Base failed.
Message ID Message Text Description may ask you to collect troubleshooting information. KAPM15308-E Log initialization failed. Log initialization failed. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM15309-I The license was successfully displayed. The license was successfully displayed. KAPM15310-E An attempt to display the license failed.
Message ID KAPM15322-E Message Text Exclusion processing failed. (function = aa...aa, detailed error code = bb...bb) Exclusion processing failed. bb...bb: Detailed error code Retry the operation. If the problem is not resolved, a detailed investigation is required to determine the cause and resolve the problem. Exclusive control has failed. Exclusive control has failed. aa...aa: Function KAPM15323-E Description Collect failure information, and then contact the Support Center.
Message ID Message Text Description bb...bb: error code cc...cc: license information KAPM15334-E The license key file that was entered could not be found. The license key file that was entered could not be found. Enter a valid license key file. KAPM15335-E The license key file that was entered is invalid. The license key file that was entered is invalid. Enter a valid license key file. KAPM15336-E KAPM15337-E The license key to be processed does not exist in the license key file.
Message ID Message Text Description To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM15423-E The specified value of option is invalid. (option = aa...aa) aa...aa: option name KAPM15424-E The directory aa...aa does not exist. aa...aa: directory name KAPM15425-E A file with the same name as the specified directory already exists. (file = aa...aa) aa...
Message ID Message Text Description required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM15430-E An attempt to write to the license information file failed. (license information file = aa...aa) aa...aa: license information file KAPM15431-E KAPM15433-E An attempt to write to the license information file failed. To determine the cause and resolve the problem, detailed investigation is required.
Message ID Message Text do not match. (line number = aa...aa) aa...aa: line number of the license information file at the transfer source KAPM15437-E The PPID values of the transfer source and transfer destination do not match. (transfer source = aa...aa, transfer destination = bb...bb) aa...aa: PPID value of the transfer source Description To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information.
Message ID Message Text Description aa...aa: license capacity of the transfer source may ask you to collect troubleshooting information. bb...bb: license capacity of the transfer destination KAPM15443-E The expiration dates of the transfer source and the transfer destination do not match. (transfer source = aa...aa, transfer destination = bb...bb) aa...aa: expiration date of the transfer source The expiration dates of the transfer source and the transfer destination do not match.
Message ID KAPM15449-E KAPM15450-I Message Text An unexpected exception occurred. hcmdslicenseconvert [aa...aa] {,[bb...bb],......[.....]} aa...aa: command line argument Description An unexpected exception occurred. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. This message displays the command line arguments that were specified for the command. bb...
Message ID KAPM15467-E Message Text Allocation of memory to store the log file path failed. Description Allocation of memory to store the log file path failed. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM15468-E Log initialization failed. Log initialization failed. To determine the cause and resolve the problem, detailed investigation is required.
Message ID Message Text Description appear as a choice in the JDK selection window. To change the JDK that is used, select Use the Java Development Kit bundled with the product or Set the installation path to a Java Development Kit. KAPM15477-E Detection of a JDK failed. Detection of a JDK failed. Make sure that a JDK is installed. If this error occurs again, directly enter the JDK installation path. KAPM15478-I JDK version = aa...aa Indicates the JDK version. aa...
Message ID KAPM15490-E KAPM15491-I Message Text Description The specified JDK could not be used. The specified JDK could not be used. Detected JDK: name = aa...aa, installation path = bb...bb Indicates the detected JDK. Check the status of the installed JDK. aa...aa: JDK type bb...bb: JDK installation path KAPM15492-E The file system at the installation destination is not NTFS. The file system at the installation destination is not NTFS. KAPM15493-E An error occurred during execution of the aa..
Message ID KAPM15501-I Message Text The command was executed. (command name = aa...aa, return code = bb...bb) Description The command was executed. aa...aa: Command name bb...bb: Return code KAPM15502-E The error has occurred in aa...aa command. code=bb...bb aa...aa: Command bb...bb: Error code KAPM15503-I aa...aa aa...aa: Command line argument The error has occurred in aa...aa command. Confirm that there are no syntax errors in the command specification.
Message ID KAPM15511-E Message Text Execution of the hcmdsdbpdls command failed. Description Execution of the hcmdsdbpdls command failed. See the KAPMxxxxx-E message output right before this message. KAPM15512-E An option is invalid. An option is invalid. Specify a valid option, and then reexecute the command. KAPM15513-E The directory does not exist. (directory path = aa...aa) aa...aa: Directory path KAPM15514-E KAPM15515-E Hitachi Command Suite Common Component has not been installed.
Message ID Message Text Description To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM15523-E KAPM15524-W An attempt to set the environment variable has failed. An attempt to set the environment variable failed. An attempt to delete the file failed. (file path = aa...aa) An attempt to delete the file failed. aa...
Message ID Message Text Description required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM15530-W An attempt to output the execution results of the pdls command to the log file failed. An attempt to output the execution results of the pdlscommand to the log file failed. KAPM15550-E Acquisition of the version of aa...aa failed. Acquisition of the product version failed. aa...
Message ID Message Text Description the cause and resolve the problem. Contact the Support Center, who may ask you to collect troubleshooting information. KAPM15555-W Deletion of a directory failed. (directory name = aa...aa) Deletion of a temporary directory used by this command failed. aa...aa: Directory path Confirm the following points, manually delete the directory, and then reexecute the command: • Confirm that the directory is not in use. • Confirm that you have the proper permissions.
Message ID Message Text Description bb...bb: Host name after change KAPM15561-I The set host name will now be displayed. (host name = aa...aa) The set host name will now be displayed. (host name = aa...aa) aa...aa: Host name KAPM15562-E KAPM15563-E KAPM15564-E One or more arguments are invalid. One or more arguments are invalid. The specified host name is invalid. The specified host name is invalid. The configuration file could not be accessed. The configuration file could not be accessed.
Message ID Message Text Description To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM15570-E Log initialization failed. Log initialization failed. To determine the cause and resolve the problem, detailed investigation is required. Contact Support Center, who may ask you to collect troubleshooting information. KAPM15580-E KAPM15581-E One or more arguments are invalid.
Message ID KAPM15586-E Message Text Description The service will not be started because the status of the service could not be confirmed. (service name = aa...aa) The service will not be started because the status of the service could not be confirmed. aa...aa: Displayed service name KAPM15587-E Acquisition of the displayed service name failed. (service name = aa...aa) aa...aa: Service name KAPM15588-E To determine the cause and resolve the problem, detailed investigation is required.
Message ID KAPM15613-E KAPM15614-E Message Text Information about supported JDK versions could not be acquired. Information about supported JDK versions could not be acquired. Execution of the aa...aa function failed. (error code = bb...bb) Execution of the aa...aa function failed. aa...aa: Function name bb...bb: Error code KAPM15615-W Description To determine the cause and resolve the problem, detailed investigation is required.
Message ID Message Text Description Specify valid backup data, and then re-execute the command. KAPM15629-E A fatal error occurred. A fatal error occurred. To determine the cause and resolve the problem, detailed investigation is required. Contact the Support Center, who may ask you to collect troubleshooting information. KAPM15630-I The parameter definition file has been backed up. The parameter definition file has been backed up.
Message ID Message Text Description installed product, and then re-execute the command. KAPM15639-W The installed product and backed-up product versions do not match. The installed product and backed-up product versions do not match. KAPM15640-W If you continue, the database might become corrupted. Do you want to continue? (y/n) [default=n] If processing continues, the database might become corrupted.
Message ID Message Text Description KAPM15650-E You cannot continue because the parameter definition file is insufficient. You cannot continue because the parameter definition file is insufficient. KAPM15651-W Processing of the hcmds64dbrepair command was interrupted. Processing of the hcmds64dbrepair command was interrupted. KAPM15652-I Version information is output. (product name = aa...aa, installed product version = bb...bb, backup data version = cc...cc) Version information is output. aa...
Message ID Message Text Description who may ask you to collect troubleshooting information. KAPM15660-I Processing ended normally. Processing ended normally. KAPM15661-E An attempt to clear a DBMS environment variable has failed. An attempt to clear a DBMS environment variable has failed. An attempt to stop the service or the DBMS has failed. An attempt to stop the service or the DBMS has failed. KAPM15662-E To determine the cause and resolve the problem, detailed investigation is required.
Message ID Message Text Description KAPM15723-I The hcmds64dbuser command will now start. The hcmds64dbuser command will now start. KAPM15724-I The command hcmds64dbuser will now finish. The command hcmds64dbuser will now finish. KAPM15726-E An option is invalid. An option is invalid. Specify valid options. KAPM15727-E KAPM15728-E The command cannot be The command cannot be executed executed because the database because the database is down. is down.
Message ID KAPM15748-E Message Text aa...aa: File name Retry. If you cannot resolve the problem, collect maintenance information, and then contact the Support Center. The file format is invalid. (file name = aa...aa) The file format is invalid. aa...aa: File name KAPM15749-E Description An attempt to output a file failed. (file path = aa...aa) aa...aa: File path To determine the cause and resolve the problem, detailed investigation is required.
Message ID Message Text Description information, and then contact the Support Center. KAPM15757-I Registration processing was successful. (target = aa...aa, return code = bb...bb) Registration processing was successful. aa...aa: Information for processing bb...bb: Return code KAPM15758-I Deletion processing was successful. (target = aa...aa, return code = bb...bb) Deletion processing was successful. aa...aa: Information for processing bb...
Message ID Message Text Description Support Center, who may ask you to collect troubleshooting information. KAPM15765-E The ID or password is invalid. The ID or password is invalid. Perform the following: KAPM15766-E KAPM15767-I 5-352 1. Confirm that the specified ID and password are correct. 2. Confirm that the ID and password do not contain any invalid characters. 3. Confirm that the ID and password do not exceed the maximum length. 4.
Message ID Message Text Description KAPM15768-I Common Component is not set to the default settings. Common Component is not set to the default settings. KAPM15769-E The specified ID cannot be used, because it is reserved. The specified ID cannot be used, because it is reserved. Specify a different ID, and then try again. KAPM15770-I Confirm that the Common Component settings are the default settings. Confirm that the Common Component settings are the default settings.
Message ID Message Text Description KAPM15802-I Are you sure you want to execute the hcmdsdbchgwork command? (Y/N) This message is output to confirm that you want to execute the command. KAPM15804-I The size of the work area is aa...aa. This message outputs the current size of the work area. aa...aa: Set size KAPM15805-I The size of the system file area This message outputs the current size is aa...aa. of the system file area. aa...aa: Set size KAPM15808-I The command will now be executed.
Message ID Message Text Description ask you to collect troubleshooting information. KAPM15823-E An internal error occurred. An internal error occurred. To determine the cause and resolve the problem, detailed investigation is required. Contact the Support Center, who may ask you to collect troubleshooting information. KAPM15824-E KAPM15825-E KAPM15826-E KAPM15827-E KAPM15828-E An unexpected exception occurred. An unexpected exception occurred. Starting of the HiRDB service failed.
Message ID KAPM15830-E Message Text hcmdsdbchgwork command execution failed. Description hcmdsdbchgwork command execution failed. To determine the cause and resolve the problem, detailed investigation is required. Contact the Support Center, who may ask you to collect troubleshooting information. KAPM15831-E Command execution failed. (return code = aa...aa) aa...aa: Return code KAPM15832-E An invalid value is set in the aa...aa file. aa...
Message ID KAPM15846-E Message Text Acquisition of the HBase64 installation path failed. Description Acquisition of the HBase64 installation path failed. Retry the operation. If the problem cannot be resolved, detailed investigation is required to determine the cause and solve the problem. Contact the support center, who may ask you to collect troubleshooting information. KAPM15847-E HBase is not installed. HBase is not installed. Make sure that HiCommand Suite Common Component is installed.
Message ID Message Text Description aa...aa: type KAPM15856-E Modification of the file attribute Modification of the file attribute failed. (file = aa...aa) failed. aa...aa: path KAPM15857-E Retry the operation. If the problem cannot be resolved, detailed investigation is required to determine the cause and solve the problem. Contact the support center, who may ask you to collect troubleshooting information. An error occurred in an internal An error occurred in an internal function.
Message ID Message Text Description bb...bb: The incorrect option and its value KAPM15874-I hcmds64dbconvert [aa...aa]{, [bb...bb],...[...]} aa...aa: Command line arguments This message displays the options specified for the hcmds64dbconvert command. bb...bb: Command line arguments KAPM15875-I The hcmds64dbconvert command started. The hcmds64dbconvert command started. KAPM15876-I The hcmds64dbconvert command finished normally. The hcmds64dbconvert command finished normally.
5-360 Messages with IDs Beginning with KAPM Hitachi Global Link Manager Messages
6 Messages with IDs Beginning with KDJE This chapter describes messages related to Hitachi Command Suite Common Component.
KDJE40000 - KDJE49999 The following table describes messages related to Hitachi Command Suite Common Component. Table 6-1 KDJE40000 - KDJE49999 (Messages Output by Hitachi Command Suite Common Component) Message ID KDJE41000-E Message Text Failed to connect to Web container. errno=aa...aa, bb...bb, cc...cc An attempt to connect to the Web container has failed. aa...aa: System-specific error number 1. The worker port number is correct. 2. The worker host name or IP address is correct. 3.
Message ID KDJE41004-E Message Text Could not redirect the request to a worker because request header was too long. Output destinations: syslog/ Eventlog KDJE41005-E Could not redirect the request to a worker because worker name which is specified in the mapping definition file was not defined to worker.list parameter in the workers definition file. (worker name=aa...aa) aa...
Message ID Message Text Description Output destinations: syslog/ Eventlog KDJE41009-E Could not create worker because it is out of memory. The worker could not be created because memory is insufficient. Output destinations: syslog/ Eventlog Memory has become insufficient. Secure more memory for the system, and restart the web server. This happens when a value specified in the worker definition file parameter (worker.worker-name.cachesize) is too large. The worker.workername.
7 Messages with IDs Beginning with KFPx This chapter describes messages related to HiRDB.
Details of KFPx Messages This section lists and describes the error messages related to HiRDB. Table 7-1 Description of Error Messages Output by HiRDB Table Table Title Table 7-2 HiRDB Messages HiRDB (KFPH) Messages (KFPH) on page 7-4 Table Contents Message Description and Action Messages are classified by prefix and described in each table. Follow the instructions in the Description and Action column for each message.
Table Table Title Table 7-8 HiRDB Messages (Require Reexecuting the Operation ) on page 7-11 HiRDB Messages (which require reexecution of the operation) Table 7-9 HiRDB Messages (Require Restoring the Database ) on page 7-12 HiRDB Messages (which require restoration of the database) Table 7-10 HiRDB Messages (Require Restartin g the System and Reexecuting the Operation ) on page 7-12 HiRDB Messages (which require the system to be restarted, and reexecution of the operation) Table Contents Message D
7-7 to Table 7-9 HiRDB Messages (Require Restoring the Database) on page 7-12) KFPImmmmm-z message-text (see Table 7-8 HiRDB Messages (Require Re-executing the Operation) on page 7-11 and Table 7-9 HiRDB Messages (Require Restoring the Database) on page 7-12) KFPKmmmmm-z message-text (see Table 7-7 HiRDB Messages (Require Collecting Maintenance Information and Contacting Customer Support) on page 7-9) KFPLmmmmm-z message-text (see Table 7-6 HiRDB Messages (No Action Required) on page 7-7 to Table 7-10 HiRDB
Message ID Message Text Description collect maintenance information, and then contact customer support. KFPH20004-E Server SDS01 termination During termination of the server failed, function=aa....aa, return SDS01, a bbbb error occurred in code=bbbb aa....aa. The system stops termination of the server SDS01. aa....aa: Function resulting in the error bbbb: Return code Output destination: syslog or the event log KFPH23006-E Failed to allocate semaphore, errno=aa....aa aa....
Message ID Message Text Description ccc: Value of errno for the shmget system call Output destination: syslog or the event log re-execute the operation. If the same message is output, take appropriate actions according to the value of errno for the shmget system call (see Note). Note: The table below shows the cause of the error and actions to be taken for each errno. Cause Errno 12 Windows Systems Resources are insufficient.
Table 7-4 HiRDB Messages (KFPR) Message ID KFPR26032-E Message Text Description Unable to remove temporary A temporary file cannot be deleted. file, host=aa....aa, file=bb....bb The system continues processing. aa....aa: Name of the host where the file that cannot be deleted is located bb....bb: Name of the file that cannot be deleted After the operation finishes, delete the file bb....bb. If the same message is output, collect maintenance information, and then contact customer support.
Prefi x Message ID KFPH23030-I, KFPH23201-W, KFPH23202-W, KFPH24004-I, KFPH26001-I, KFPH26010-I, KFPH29005-W, KFPH29006-W, KFPH29008-I 7-8 KFPL KFPL00700-I, KFPL00705-I, KFPL00712-I, KFPL00717-I, KFPL00723-I, KFPL00728-I, KFPL00736-I, KFPL00800-I, KFPL25700-I, KFPL00701-I, KFPL00707-I, KFPL00713-I, KFPL00719-I, KFPL00724-I, KFPL00732-I, KFPL00738-I, KFPL00810-I, KFPL50000-I, KFPL00702-I, KFPL00708-I, KFPL00714-I, KFPL00720-I, KFPL00725-I, KFPL00733-I, KFPL00739-I, KFPL00900-I, KFPL50001-I KFPL00703-I
Prefi x KFPX Message ID KFPX14045-W, KFPX14046-W, KFPX14047-W, KFPX14078-W, KFPX14245-W, KFPX14246-W, KFPX14247-W, KFPX14250-I, KFPX18507-W, KFPX24012-I, KFPX24013-I, KFPX24212-I, KFPX24213-I, KFPX24225-I, KFPX24226-I, KFPX24237-I, KFPX24239-I, KFPX24261-I, KFPX24402-E, KFPX24404-I, KFPX28400-I, KFPX28401-I, KFPX28402-I Table 7-7 HiRDB Messages (Require Collecting Maintenance Information and Contacting Customer Support) Prefi x Message ID KFPA KFPA20005-E, KFPA20006-E KFPC KFPC00102-E, KFPC00103-I, K
Prefi x Message ID KFPL25999-E, KFPL26339-E, KFPL26340-E, KFPL26342-E, KFPL27100-E, KFPL27500-E, KFPL28000-E, KFPL28002-E, KFPL28101-E, KFPL28102-E, KFPL28103-E, KFPL28104-E, KFPL51203-E 7-10 KFPO KFPO00100-E, KFPO00109-E, KFPO00111-E, KFPO00112-E, KFPO00115-E KFPR KFPR16003-E, KFPR16126-E, KFPR16301-E, KFPR16328-E, KFPR16339-E, KFPR26008-E, KFPR26015-E, KFPR26024-E, KFPR26031-E, KFPR26056-E, KFPR26205-E, KFPR26210-E, KFPR26220-E, KFPR26227-E, KFPR26234-E, KFPR26239-E, KFPR26255-E, KFPS KFPS00345-W,
Prefi x Message ID KFPX14302-W, KFPX18502-E, KFPX18506-E, KFPX18508-E, KFPX18550-E, KFPX18551-E, KFPX18555-E, KFPX18560-E, KFPX18562-E, KFPX18563-E, KFPX18566-E, KFPX24004-E, KFPX24005-E, KFPX24006-E, KFPX24007-E, KFPX24009-W, KFPX24011-W, KFPX24018-E, KFPX24019-E, KFPX24020-E, KFPX24022-E, KFPX24025-W, KFPX24026-E, KFPX24028-W, KFPX24029-W, KFPX24030-E, KFPX24202-E, KFPX24204-E, KFPX24205-E, KFPX24206-E, KFPX24207-E, KFPX24211-W, KFPX24218-E, KFPX24219-E, KFPX24220-E, KFPX24222-E, KFPX24223-E, KFPX24227-E
Table 7-9 HiRDB Messages (Require Restoring the Database) Prefi x Message ID KFPH KFPH00306-E, KFPH22001-E, KFPH23007-E, KFPH25001-E, KFPH00307-E, KFPH00308-E, KFPH00309-E, KFPH20005-E, KFPH22003-E, KFPH22018-W, KFPH22025-E, KFPH22026-E, KFPH23023-I, KFPH23100-E, KFPH23101-E, KFPH25000-E, KFPH27006-E, KFPH27007-E, KFPH27008-E KFPI KFPI21561-E, KFPI21562-E KFPL KFPL20020-E KFPR KFPR26072-E KFPS KFPS01180-E, KFPS01202-E, KFPS01260-E, KFPS01270-E, KFPS02220-E KFPX KFPX24017-E, KFPX24217-E KFPS01
Acronyms and abbreviations The following acronyms and abbreviations might be used in this guide.
DTD Document Type Definition G GUI Graphical User Interface I I/O Input/Output IP Internet Protocol K KDC Key Distribution Center L LDAP Lightweight Directory Access Protocol LU Logical Unit LUN Logical Unit Number M MSCS Microsoft Cluster Service # A B C D E F G H I J K L M N O P Q Acronyms-2 Hitachi Global Link Manager Messages R S T U V W X Y Z
O OS Operating System R RADIUS Remote Authentication Dial In User Service S SAX Simple API for XML SCSI Small Computer System Interface SNMP Simple Network Management Protocol SOAP Simple Object Access Protocol U URL Uniform Resource Locator W WWN World Wide Name X XML Extensible Markup Language # A B C D E F G H I J K L M N O P Q R S T U V W X Y Z Acronyms-3 Hitachi Global Link Manager Messages
# A B C D E F G H I J K L M N O P Q Acronyms-4 Hitachi Global Link Manager Messages R S T U V W X Y Z
Hitachi Global Link Manager Messages
Hitachi Data Systems Corporate Headquarters 2845 Lafayette Street Santa Clara, California 95050-2639 U.S.A. www.hds.com Regional Contact Information Americas +1 408 970 1000 info@hds.com Europe, Middle East, and Africa +44 (0)1753 618000 info.emea@hds.com Asia Pacific +852 3189 7900 hds.marketing.apac@hds.
