Creating RAID arrays in the EFI shell - White Paper

711747-001 7
------------------------------------------------------------------------
Controller information
------------------------------------------------------------------------
Controller type : SAS2308_1
BIOS version : 7.23.02.00
Firmware version : 12.00.02.00
Channel description : 1 Serial Attached SCSI
Initiator ID : 0
Maximum physical devices : 255
Concurrent commands supported : 3072
Slot : 1
Segment : 0
Bus : 2
Device : 0
Function : 0
RAID Support : Yes
------------------------------------------------------------------------
IR Volume information
------------------------------------------------------------------------
------------------------------------------------------------------------
Physical device information
------------------------------------------------------------------------
Initiator at ID #0
Device is a Hard disk
Enclosure # : 1
Slot # : 0
SAS Address : 4433221-1-0000-0000
State : Ready (RDY)
Size (in MB)/(in sectors) : 715404/1465149167
Manufacturer : ATA
Model Number : WDC WD7500AALX-6
Firmware Revision : 1H18
Serial No : WDWCATR3740757
GUID : 50014EE2AFBB4C36
Protocol : SATA
Drive Type : SATA_HDD
Device is a Hard disk
Enclosure # : 1
Slot # : 1
SAS Address : 5000CCA-0-1215-EF49
State : Ready (RDY)
Size (in MB)/(in sectors) : 572325/1172123567
Manufacturer : HITACHI
Model Number : HUC106060CSS600
Firmware Revision : HPH0
Serial No : PPGD1YVB
GUID : 5000CCA01215EF48
Protocol : SAS