HP SATA/SAS hard drive and Solid State Drive installation

Step 1—Preparing for component installation
NOTE: Computer models vary. All illustrations are examples only.
Accessing the internal components of the computer
1. If you need help preparing the computer for this installation, refer to the:
●
Removal and replacement procedures in the Maintenance and Service Guide for your
computer at
http://www.hp.com/support/manuals, or
●
Removal and replacement videos applicable to your specific computer at
http://www.hp.com/go/sml.
2. Power down the computer, then disconnect the power cord.
3. Power down all external devices, then disconnect them from the computer.
4. Remove the side access panel.
Precautions for handling the drive
●
Do not move the drive during operation.
●
Avoid placing the drive in a location that is subject to extreme temperatures or mechanical
vibration.
●
Keep the original packing materials for future transportation of the drive.
●
If any object or liquid falls into the cabinet, immediately unplug the computer and have it checked
by an authorized service provider.
4 HP SATA/SAS hard drive and Solid State Drive installation