HP Workstations for Linux - User Guide

7. After an array has been created, the utility gives options for managing it through the View
Existing Array menu. Viewing the array displays various properties of the RAID array, including
the disks present and their status.
Figure 6-6 LSI Logic MPT Setup Utility – View array
8. Select Manage Array and press Enter to use the management features. From here, the disks that
are configured to be hot spares can be managed, the array can be activated, deactivated, or
deleted, and if the array is not at an Optimal status due to a disk failure or other problem, it can
be synchronized from this menu.
Figure 6-7 LSI Logic MPT Setup Utility – Manage array
LSI 3041E and Integrated LSI 1064/1068 Setup
27