HP Z Workstations - 22-in-1 Media Card Reader Installation

Reassembling the computer
To reassemble the computer after installation:
1. Reinstall the card support, if removed.
2. Reinstall the airflow guide, if removed.
3. Reinstall the side access panel.
4. Reconnect power to the computer and all external devices.
5. Restore power to the computer and all external devices.
Identifying media slots
Front panel components
The media slots accept the following cards:
Figure 6 HP 22-in-1 USB Media Card Reader
Slot ID Media
xD-Picture Card (xD)
2
● Micro SD (T-Flash)
●
Micro SDHC
Status Light
●
Secure Digital Card (SD)
●
Secure Digital High Capacity (SDHC)
●
MiniSD
●
MiniSDHC
●
MultiMediaCard (MMC)
●
Reduced Size MultiMediaCard (RS MMC)
●
MMC Micro (adapter required)
●
MultiMedia Card 4.2 (MMC Plus, including MMC Plus HC)
●
Reduced Size MultiMedia Card 4.2 (MMC Mobile, including MMC Mobile HC)
USB Connector
6 HP 22-in-1 Media Card Reader ENWW