Intel vPro Processor Technology Setup and Configuration for the HP Z1, Z210, Z420, Z620 and Z820 Workstations

12
a. Username and password. This option allows users and passwords to be
added from the WebGUI. If it is disabled, then only the administrator has
MEBx remote access
Default (and recommended) setting: Enabled.
b. SOL. This option enables/disables Serial Over LAN (SOL) functionality.
Default (and recommended) setting: Enabled
c. IDE Redirection. This option enables / disables IDE Redirection (IDE-R)
functionality.
Default (and recommended) setting: Enabled
d. Legacy Redirection Mode. This option allows the Redirection feature to
work with the pre-AMT 6.0 remote consoles.
Default (and recommended) setting: Disabled
e. KVM Configuration.
Default (and recommended setting: Enabled
12. User Consent menu (Figure 11) .
Figure 11. Intel AMT User Consent Configuration Screen
a. User Opt-in.
Default setting: KVM
Recommended setting: (User dependent)
b. Opt-in Configuration from Remote IT. This option disables/enables the
Remote User’s ability to select User OPT-IN Policy. If set to disabled, only
the local user can control the opt-in policy.
Default setting: Enabled Remote Control of KVM Opt-in Policy
Recommended setting: (User dependent)