Intel vPro Processor Technology Setup and Configuration for the HP Z1, Z210, Z420, Z620 and Z820 Workstations

15
15. At the previous menu (Figure 13), select TCP/IP Settings and view the AMT
TCP/IP Settings screen (Figure 14). AMT 7.1 supports IPV4 and IPV6 interface.
Fo l l ow s te p s 15 a -15 f t o c on f ig u re f o r I P V4 a n d 15 g -15 h f or I P V 6 .
Figure 14. Intel AMT TCP/IP Settings Screen
a. Wired LAN IPV4 Configuration:
DHCP Mode
Default (and recommended) setting: Enabled
If DHCP is disabled, then steps 15b through 15f are required to configure
the IPv4 static IP address for Intel AMT.
Figure 15. Intel AMT Wired LAN IPV4 DHCP Disabled Configuration Screen