Intel vPro Processor Technology Setup and Configuration for the HP Z1, Z210, Z420, Z620 and Z820 Workstations

26
b. Provisioning Record. This menu displays provision record data of the
system. No changes can be made at this menu.
Default setting: Not present
The record for a system with PSK provisioning will include the following
information:
-- TLS Provisioning Mode
-- Provisioning IP
-- Date of Provisioning
The provisioning record for a system with PKI provisioning will include the
following information:
-- TLS Provisioning Mode
-- DNS
-- Host Initiated
-- Hash Data
-- Serial Algorithm
-- ISDefault Bit
-- Time Validity Pass
-- FQDN
-- Provisioning IP
-- Date of Provisioning
c. RCFG. This option is for Remote Configuration (RCFG) also known as Zero
Touch Configuration (ZTC) or Host Based provisioning. Refer to the RCFG
section for more information.
d. Provisioning Server IPV4/IPV6. Enter the address for the Provisioning
server.
Default setting: 0.0.0.0
Recommended setting: (Network dependent)
This option is used in Enterprise mode when an Intel AMT Setup and
Configuration (Provisioning) Server is available. It points to the IP address
of the SCS. If the IP is left as the default, the ME will look for
“ProvisionServer” on DNS. The default port for many SCSs is at 9971.
Some ISV’s may require additional settings, such as the SCS port number
and SCS IP address. Contact your Management Console ISV for more
details.
e. Provisioning Server FQDN. Enter the address for the FQDN server.
Default setting: (None)
Recommended setting: (Network dependent)
This option is used in Enterprise mode when an Intel AMT Setup and
Configuration (Provisioning) Server is available. It points to the Fully
Qualified Domain Name (FQDN) of the SCS.