Data Sheet

SPEC NO: DSAA9497 REV NO: V.7 DATE: MAR/21/2006 PAGE: 1 OF 3

APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI

Package Dimensions

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.25(0.01") unless otherwise noted.

3. Lead spacing is measured where the leads emerge from the package.

4. Specifications are subject to change without notice.

Description

The Yellow source color devices are made with

Gallium Arsenide Phosphide on Gallium Phosphide

Yellow Light Emitting Diode.

P/N: L-934YD YELLOW

T-1 (3mm) SOLID STATE LAMP

Features



LOW POWER CONSUMPTION.



POPULAR T-1 DIAMETER PACKAGE.



GENERAL PURPOSE LEADS



RELIABLE AND RUGGED.



LONG LIFE - SOLID STATE RELIABILITY.



AVAILABLE ON TAPE AND REEL.



RoHS COMPLIANT.

PAGE 1
T-1 (3mm) SOLID STATE LAMP P/N: L-934YD Features YELLOW Description LOW POW ER CONSUMPTION. The Yellow source color devices are made with POPULAR T-1 DIAMETER PACKAGE. Gallium Arsenide Phosphide on Gallium Phosphide GENERAL PURPOSE LEADS Yellow Light Emitting Diode. RELIABLE AND RUGGED. LONG LIFE - SOLID STATE RELIABILITY. AVAILABLE ON TAPE AND REEL. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3.
PAGE 2
Selection Guide Part No. Dice L-934YD Iv (mcd) [2] @ 10mA Lens Type YELLOW (GaAsP/GaP) YELLOW DIFFUSED Viewing Angle [1] Min. Typ. 2θ θ1/2 5 15 60° Notes: 1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous Intensity/ Luminous Flux: +/-15% Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Yellow λD[1] Dominant Wavelength ∆λ1/2 Typ. Max.
PAGE 3
Yellow L-934YD SPEC NO: DSAA9497 REV NO: V.7 DATE: MAR/21/2006 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.