User's Manual
Table Of Contents
- Contents
- Notebook Features
- Pointing Devices and Keyboard
- Battery Packs
- Running the Notebook on Battery Power
- Identifying Battery Packs
- Inserting or Removing a Primary Battery Pack
- Inserting or Removing a MultiBay Battery Pack
- Charging a Battery Pack
- Monitoring the Charge in a Battery Pack
- Managing Low-Battery Conditions
- Calibrating a Battery Pack
- Battery Conservation Procedures and Settings
- Storing a Battery Pack
- Disposing of a Used Battery Pack
- Finding More Power Information
- Drives
Drives
Hardware Guide 4–2
Adding a Drive to the System
Removable drives enable you to store and access data.
■ A standard drive can be added to the system by inserting the
drive into the notebook MultiBay or optional Advanced Port
Replicator.
■ A diskette drive can also be added.
■ A USB drive can be added by connecting the drive to a USB
connector on the notebook or optional Port Replicator.
For information about connecting a USB drive, see the
“External Devices” chapter in this guide.
The notebook has 2 drive bays:
■ The hard drive bay supports only a hard drive. The hard drive
in the hard drive bay is the primary hard drive.
■ The MultiBay supports any optional MultiBay device,
including the following:
❏ Hard drive (inserted into a MultiBay hard drive adapter)
❏ CD-ROM or CD-RW drive
❏ DVD-ROM or DVD/CD-RW or DVD+RW
❏ Diskette drive
❏ MultiBay battery pack
348383-001.book Page 2 Friday, September 12, 2003 10:50 AM