User's Manual

Communication Devices
Hardware Guide 6–6
To connect the network cable:
1. Check that the existing LAN supports Ethernet
10BASE-T/100BASE-TX connections.
2. Plug the network cable 1 into the RJ-45 network jack on the
notebook.
3. Plug the other end of the cable 2 into a network jack.
Your model might vary slightly from this illustration.
4. Start or restart the notebook.
✎
See Windows Help for information about setting up and using
LAN connections. Select Start > Help and Support. Contact your
network administrator for network information.
348383-001.book Page 6 Friday, September 12, 2003 10:50 AM