User's Manual

External Devices
Hardware Guide 7–2
Connecting a Monitor or Projector
To connect an external monitor or projector to the notebook,
insert the monitor cable 1 into the external monitor connector on
the back of the notebook, and connect the other end of the cable
2 to a monitor or projector.
Your model might vary slightly from this illustration.
✎
If a properly connected external monitor or projector does not
display an image, press the
fn+f4 hotkey to switch the image to the
monitor.
348383-001.book Page 2 Friday, September 12, 2003 10:50 AM