User's Manual

Hardware Upgrades
Hardware Guide 8–11
5. To remove a memory module from the memory
expansion slot:
a. Pull the retention clips 1 away from each side of the
module. The module tilts upward when released.
b. Lift the edge of the memory module 2 and gently
remove it from the slot.
Your model might vary slightly from this illustration.
Ä
To protect a memory module after it has been removed,
place it in a static-safe container.
Repeat step 5 to remove the memory module from the primary
memory slot, if necessary.
348383-001.book Page 11 Friday, September 12, 2003 10:50 AM