Operation Manual

49
E
•Press the Shutter button on the left side of the HP iPAQ or tap the
Shutter button
on the screen.
4. After creating the film, you can:
• End the video clip, tap or press the Shutter icon on the screen again.
• View the video clip, tap the Play icon .
• Stop the video clip, tap the Stop icon .
• Exit the video clip and camera application,
tap the Close icon .
Taking a Photo with GPS Information Attached
To attach a GPS location to photos as you capture them:
1. Tap Programs > Photosmart Camera.
2. Tap the GPS button to turn on the GPS feature.
3. Start taking photos as usual.
Whenever the HP Photosmart Camera is launched, the GPS feature can take a few
minutes to obtain a location fix. The GPS feature displays on-screen indicators in
the following ways:
The GPS feature relies on information from satellites to obtain a location fix. It
works best when your HP iPAQ has a clear view of the sky. If the sky is obstructed
by trees, tall buildings, structures or bad weather, it may be difficult to obtain a
location fix. It is quite difficult to obtain a location fix indoors.
To take indoor photos with location information, obtain a fix outdoors. Be sure to
keep the camera application open, and then take the photos indoors. Your images
are stamped with the last known location that you obtained earlier.
Indicator Status
No fix (White text) No location information is available (Images will not
be tagged with the GPS location.)
Fix (Green text) Location information is available (Images will be
tagged with the GPS location.)
Lost fix (Yellow text) Location information was available but is no longer
current. Your images will be tagged with the last
available location.)