User's Guide

System Feature Description
SIM Card 3V, SIM standards, Phase 1, 2, 2+, CPHS, SIM Toolkit
GSM / GPRS / EDGE Technology Global voice and data wireless network [Global System for
Mobile Communications (GSM), General Packet Radio
Services (GPRS), Enhanced Data rates for Global Evolution
(EDGE)]
GSM Voice Features
Half Rate, Full Rate, Enhanced Full Rate, Adaptive Multi-
Rate (HR,FR/EFR/AMR)
Echo cancellation and noise reduction
Full duplex hands-free
GPRS Data Features Class B GPRS Multi slot Class 10, Quadband
Coding Schemes: CS1 to CS4, Network Mode 1-4
EDGE Features Class 10, Support for E-GPRS coding schemes MCS1 to
MCS9 in both the uplink and downlink
Circuit Switched Data Normal Single Slot GSM Circuit Switched Data @ 9.6 Kbps
Transparent and Nontransparent data
Supplementary Services Supported Call Forwarding, Call Barring, Multiparty, Calling Line Identity,
Call Waiting, and Call Hold
Unstructured Supplementary Service Data USSD Phase 2 (MO & MT)
Encryption GEA1
Authentication Password Authentication Protocol (PAP) or Challenge
Authentication Protocol (CHAP)
Messaging Services
Short Message Service (SMS) messaging for GSM, both
mobile-originated and mobile-terminated
Multimedia Messaging Service (MMS)
Cell Broadcast
Ring Tone file formats Simple MIDI Type 0, WMA, WAV, MP3, polyphonic MIDI
LED Indicators:
Charge and Notification LED
Flashing green indicates your HP iPAQ is in a mobile
phone coverage area.
Flashing amber indicates an event notification or alarm
on your HP iPAQ.
Solid amber indicates unit is charging.
Solid green indicates unit is fully charged.
Flashing red indicates the battery needs immediate
recharging. 1200 mAh battery can take up to four hours
to fully charge
ENWW System Specifications 169