Operation Manual

ENWW 2-13
7 Click Parallel.
Note If the Express Install using HP recommended defaults check box is
selected, the installation program uses default options. If you want to
specify the installation options, clear this check box.
8 Follow the instructions on the screen to complete the installation.
9 Connect the parallel cable to the computer and the printer.
Connecting the printer using a network connection
Note When setting up the printer using a network connection, connect the
printer to the network first, and then install the software.
1 Install the HP Jetdirect print server in the printer. The print server
must be installed before you install the printer software. For more
information about installing the HP Jetdirect print server, see
“Installing optional accessories.”
Note The HP Jetdirect print server is pre-installed in the HP Business Inkjet
2600dn printers.
2 Connect the network cable between the HP Jetdirect print server
and a network port.
3 Start Windows and make sure no other Windows applications are
running.
4 Insert the Starter CD into your CD-ROM drive. The CD menu runs
automatically.
If the CD menu does not run automatically, click Start, click Run,
and at the command line box, type the letter of your computer's CD-
ROM drive followed by :\SETUP (for example, type D:\SETUP).
5 Click Install Printer Driver from the CD menu.
6 Choose your language, and then click OK.
7 Follow the instructions on the screen.
8 Click Connected to the network, and then click Next.
9 Click Basic Server or Peer-to-Peer Network Setup, and then click
Next.
10 Follow the instructions on the screen to complete the installation.