Operation Manual

ENWW 7-13
To print using the PCL 5C printer driver
1 Click File, and then click Print.
2 Make sure the printer is selected, and then click Properties or
Setup. (The options might be different for your application.)
3 Select the media size on which you want to print from the Size is
drop-down menu,
4 Select the type of media on which you want to print from the
Type is drop-down menu.
5 Select the location of the media on which you want to print in the
Source is drop-down menu.
• If the paper type and paper size on which you want to print has
been configured in the LCD control panel, select Auto Select.
The printer automatically selects the appropriate tray for the
media. For information about configuring the paper type and
paper size settings in the LCD control panel, see “Load paper
and configure media types and sizes.”
• If you want to print an envelope, card, or other special media
using the manual feeds, select Manual Feed, and then follow
the instructions on the LCD control panel. For information about
loading the manual feeds, see “Loading the manual feed units.”
• If you want to print to a specific tray, select Tray 1 or Tray 2.
6 On the Paper tab, click a print mode in the Print Quality section.
7 Change other print settings, if necessary, and then click OK.
8 Click Print.
To print using the Postscript printer driver
1 Click File, and then click Print.
2 Make sure the printer is selected, and then click Properties or
Setup. (The options might be different for your application.)
3 Select the media size on which you want to print:
• Windows 95, Windows 98, and Windows Millennium Edition:
Select the media size in Paper size list.
• Windows NT 4.0: On the Page Setup tab, select the media size
from the Paper Size drop-down menu.
• Windows 2000 and Windows XP: Click Advanced, and then
select the media size from the Size is drop-down menu in the
Paper/Output options.