Owner's manual
General I/O Devices
This section displays information about the following I/O devices:
• Diskette Drives—This section lists and describes the device diskette drives.
• Serial and Parallel Ports—This section displays the serial ports and the parallel ports that have
been enabled for this unit, along with their corresponding I/O addresses.
The industry-standard addresses for parallel ports are as follows:
◦ Primary Port set to 378h
◦ Secondary Port set to 3BCh
The industry-standard addresses for serial ports are as follows:
◦ COM1 set to 3F8h
◦ COM2 set to 2F8h
These addresses are sometimes changed due to conflicts with another device. Communication
ports that have been disabled do not show up in this window.
• Universal Serial Bus Port—This section displays the Universal Serial Bus (USB) ports that have
been enabled for this unit.
Following information is displayed in the USB table:
◦ Port—displays the USB port numbers.
◦ Device Description—displays the device name when the USB device is attached to the
port.
◦ Status—displays the status of the USB device whether it is Present or Absent or N/A.
Default value is displayed as N/A against each available ports on this machine.
• Memory Modules—This section lists detailed information about the memory boards and
modules installed in the system. The following items may be displayed:
◦ Socket Number—displays the socket number for the memory module.
◦ Type—displays the following values depending on the type of memory module selected.
◦ Not installed
◦ Board—The memory module is permanently mounted (not modular) on a system board
or memory expansion board.
◦ Single width module
◦ Double width module
◦ SIMM (Single Inline Memory Module)
◦ PCMCIA (Personal Computer Memory Card International Association technology memory
module)
◦ Compaq/HP specific memory module
◦ DIMM (Dual Inline Memory Module)
◦ Size—Displays the size of the memory module.
◦ Speed—Displays the speed of the memory module.
◦ Technology—Displays the possible values for the memory module technology, including:
– FPM (Fast-Page Mode)
– EDO (Extended Data Out)
– BEDO (Burst Extended Data Out)
130 Agent information