Specifications

HP Integrity rx2600 server and HP workstation zx6000 Operation and Maintenance Guide 15
Overview
Optical drives One open bay for 8x slimline DVD or CD-RW/DVD
SCSI controller Two Ultra 320 SCSI channels
One external SCSI port (rear panel):
• 68-pin standard, high density SCSI connector
• Must use cables designated as U320-capable with U320 devices
• 12 m maximum bus length
•SCSI ID:
• May not use SCSI ID 2 when a drive is installed in internal bay 2
• May use SCSI ID 2 for the external port if there is no drive in bay 2
•Termination:
•Must be terminated if there are devices attached
•Must not be terminated if no devices are attached (automatically
terminates if no devices are attached)
• Device support:
•LVD devices
•Legacy SE devices
•SE, narrow devices
IDE controller Ultra ATA-100 capable controller
Supports one IDE optical drive (CD/DVD)
Graphics
controllers
zx6000 workstation supports one of the following options:
•AGP graphics card
• iLO MP card VGA port
rx2600 server:
• iLO MP card VGA port
Accessory card
slots
zx6000 workstation:
• One AGP Pro 4
× 32-bit slot supporting 1.5V AGP cards
• Three 64-bit 133 MHz Peripheral Component Interconnect
(PCI-X 1.0) slots, supporting all bridges and multifunction PCI-X devices; all
three PCI-X slots comply with PCI-X 1.0 specification
rx2600 server:
• Four 64-bit 133 MHz Peripheral Component Interconnect (PCI-X 1.0) slots
Feature Description