Specifications

HP Integrity rx2600 server and HP workstation zx6000 Operation and Maintenance Guide 71

Removing and Replacing Components

Align the Front Bezel

Removing and Replacing Hot-Swappable and

Hot-Pluggable Devices

The rx2600 and zx6000 have hard disk drives that are hot-pluggable and power supplies and fans

that are hot-swappable. This section explains how to swap the following devices while the server

is running:

■ System fans

■ Power supplies

■ Hard drives

System Fans

There are four system fans that keep the server cool when it is running. The system fans are

hot-swappable. This enables you to replace a fan while the server is running.

CAUTION: When the server is running, you must replace the top cover within four minutes to prevent

components from overheating.

Removing a System Fan

To remove a system fan, follow these steps

1. Remove the server covers.

2. Remove the fan.

a. Grasp the appropriate fan and lift it out of the fan socket to remove it:

◆ fan 1A, 1B, 2, or 3 from a rack-mounted server, or

◆ fan 3 from a pedestal-mount server