Instruction Manual

RESTART OA
• Command:
RESTART OA [<bay number>]
• Description:
Resets the Onboard Administrator module specified by <bay number>. If no bay number is
given, then the Onboard Administrator the user is logged in to is restarted.
• Access level/Bay level:
OA Administrator, OA Operator
• Restrictions:
None
SET DISPLAY EVENTS
• Command:
SET DISPLAY EVENTS {ON | OFF}
• Description:
Turns the displaying of events that are triggered by status changes in the system on or
off.
◦
◦ This command is specific to the CLI session, and must be issued for every CLI session to
display events in that session.
• Access level/Bay level:
All
• Restrictions:
Only for bays for which you have privileges
SET ENCLOSURE ASSET
• Command:
SET ENCLOSURE ASSET [TAG] "<asset tag>"
• Description:
Sets the enclosure asset tag◦
◦ The default enclosure asset tag is blank
• Access level/Bay level:
OA Administrator, OA Operator
• Restrictions:
The <asset tag> must be 0 to 32 characters long and includes all alphanumeric, underscore
(_), and dash (-) characters.
RESTART OA 73