Owner manual

Table Of Contents
iPAQ Pocket PC H3800 Series Reference Guide 35
Communicating
9. If you need to enter the TCP/IP settings, tap Advanced and tap TCP/IP
10. Select Use specific IP address
11. Enter your IP address
12. Tap OK
13. Tap Next
14. Enter the phone number for your Internet Service Provider and tap Next
15. Tap Finish to set up the modem connection
Set up a remote connection using an Ethernet/LAN card
To connect to the Internet or to your network with an Ethernet/LAN card, you need
a computer with an Ethernet card
a computer set up for TCP/IP and the Client for Microsoft Networks
an Ethernet hub or a crossover cable to plug in your Compaq iPAQ Pocket PC
a Single-slot or Dual-slot PC Card Expansion Pack or a CompactFlash (CF) Card
Expansion Pack
1. Insert your Ethernet/LAN card into your Compaq iPAQ Pocket PC
If your Ethernet/LAN card is not recognized, follow your Ethernet card manufacturer’s
instructions to install the Ethernet card driver
2. If you are using a DHCP server, the network settings should be entered for you
automatically