Instruction Manual
Table Of Contents
- HP iPAQ Product Information Guide
- Welcome
- Box Contents
- Components
- Getting Started CD Contents
- Navigation Quick Start
- Continuing Setup
- Entering Text
- Resetting Your HP iPAQ
- Entertainment
- Mobile Office
- WLAN
- Bluetooth
- Protecting the HP iPAQ Screen from Cracking or Damage
- Obtaining Services for a Cracked or Damaged Screen
- Additional Guidelines for Using Your HP iPAQ
- Frequently Asked Questions
- Finding More Information
- Index
Navigation Quick Start
The Travel Companion can be used as a GPS navigation system right out of the box. The sections that
follow provide instruction to prepare and use the Travel Companion immediately after purchase.
CAUTION Drive with due care and attention when using the Travel Companion for navigation.
Installing the Battery
The battery provides power for the Travel Companion to operate. The Travel Companion comes with a
mini-USB synchronization cable, which you must use with a power adapter to charge the device.
To install the battery:
1. Turn the Travel Companion over so you can see the back battery cover.
2. Press the battery release button (1).
3. Slide the battery compartment cover down about 1/2 inch, and then lift the cover off the Travel
Companion (2).
4. Insert the battery into the compartment (1) so that the connectors on the battery mate with the pins
in the battery compartment, and then press down until the battery locks into place (2). As you insert
the battery, be sure to pull the battery removal tab out so it is on the outside of the battery.
8