HP Point of Sale (POS) Peripherals Configuration Guide

Page 11 of 522
1 Introduction
This document contains setup and quick testing information for HP Point of Sale (POS) peripherals and
systems.
Note: All HP Point of Sale (POS) peripherals are not available worldwide; please check with the HP
reseller in your area for the available HP peripherals.
2 General Information
2.1.1 Where to obtain the latest software for the HP POS Peripherals
The latest released versions of software for the HP peripherals are available on the HP.COM
web site. Once you have navigated to your HP Point of Sale platform on the HP.COM web site
and have selected the operating system you will see the “download by category” section (as
shown below). Please go to the appropriate category to obtain the software package.
The “Software – POS” section is a generic section that is used for HP POS drivers that do not
have their own category section on the web site. For example, the “OPOS Common Control
Objects” Softpaq would be found there.
2.1.2 OPOS and CCO Drivers/Application
On the HP Point of Sale System that have HP’s Microsoft Windows operating image, the OPOS
drivers for the HP branded peripherals have been installed in the image (thermal receipt printers
/ stand-alone MSR / hand scanner / POS keyboard with integrated MSR / pole display). The
Common Control Object (CCO) version 1.9.000 (or later) have also been installed/registered in
the HP Windows operating system image.
3 Port Information
To identify the type and number of ports available on the system, refer to the Hardware Reference
Guide included in the HP factory image and available from the Product Information support section
of HP.COM.