HP rp5800 Retail System - Maintenance & Service Guide

Front Bezel Security
The front bezel can be locked in place by installing a security screw provided by HP. To install the
security screw:
1. Prepare the computer for disassembly (
Preparation for Disassembly on page 42).
2. Remove the access panel (
Access Panel on page 43).
3. Remove the front bezel (
Front Bezel on page 44).
4. Remove one of the five silver 6-32 standard screws located on the front of the chassis behind
the bezel.
Figure 7-3 Retrieving the Front Bezel Security Screw
5. Replace the front bezel.
Front Bezel Security 45