HP rp5800 Retail System - Maintenance & Service Guide

Front Fan
Description Spare part number
Front fan 653024-001
1. Prepare the computer for disassembly (Preparation for Disassembly on page 42).
2. Remove the access panel (
Access Panel on page 43).
3. Remove the fan duct
Fan Duct on page 86.
4. Disconnect the fan control cable from the system board connector labeled CHFAN.
5. Press the tabs (1) that secure the fan assembly to the front of the chassis.
6. Pull the assembly toward the rear of the unit (2), and then lift it out of the chassis.
Figure 7-52 Removing the Front Fan
To install the front fan, reverse the removal procedures.
88 Chapter 7 Removal and Replacement Procedures