Programming Reference Guide

Enter/Exit Programming Mode 1D Code Selection

148 HP Wireless Barcode Scanner

Code 93 Set Length 2

This feature specifies one of the barcode lengths for Code 93 Length Control. Length 2 is the

maximum label length if in Variable Length Mode, or the second fixed length if in Fixed

Length Mode. Length includes the barcode’s check,

data, and full-ASCII shift characters.

The length does not include start/stop characters. The

length can be set from 1 to 50

characters. A setting of 0 specifies to ignore this length (only one fixed length).

Table 20 provides examples for setting Length

2. See page 219 for detailed instructions on

setting this feature.

Table 20. CODE 93 Length 2 Setting Examples

STEP ACTION EXAMPLES

1 Desired Setting

00 (Ignore This

ngth)

07 Characters 15 Characters 50 Characters

2 Scan ENTER/EXIT PROGRAMMING MODE

3 Scan SELECT CODE 93 LENGTH 2 SETTING

Scan Two Characters From

Appendix D, Keypad

‘0’ and ‘0’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’

5 Scan ENTER/EXIT PROGRAMMING MODE

Select Code 93 Length 2 Setting

Make a mistake? Scan the CANCEL barcode to

abort and not save the entry string. You can

then start again at the beginning.

CANCEL

$CC9L2

DEFAULT

50 = Length 2 is 50 Characters