Programming Reference Guide

1D Code Selection

157

Plessey Set Length 2

This feature specifies one of the barcode lengths for Plessey Length Control. Length 2 is the

maximum label length if in Variable Length Mode, or the second fixed length if in Fixed

Length Mode. Length includes the barcode’s check,

data, and full-ASCII shift characters.

The length does not include start/stop c

haracters.

The length can be set from 1 to 50 characters. A setting of 0

specifies to ignore this length

(only one fixed length).

Table 24 provides examples for setting Length

2. See page 219 for detailed instructions on

setting this feature.

Table 24. Plessey Length 2 Setting Examples

STEP ACTION EXAMPLES

1 Desired Setting

00 (Ignore This

ngth)

07 Characters 15 Characters 50 Characters

2 Scan ENTER/EXIT PROGRAMMING MODE

3 Scan SELECT PLESSEY LENGTH 2 SETTING

Scan Two Characters From

Appendix D, Keypad

‘0’ and ‘0’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’

5 Scan ENTER/EXIT PROGRAMMING MODE

Select Plessey Length 2 Setting

Make a mistake? Scan the CANCEL barcode to

abort and not save the entry string. You can

then start again at the beginning.

CANCEL

$CPLL2

DEFAULT

50 = Length 2 is 50 Characters