Programming Reference Guide

Enter/Exit Programming Mode Maxicode

172 HP Wireless Barcode Scanner

Maxicode Length Control

This feature specifies either variable length decoding or fixed length decoding for this

symbology.

Variable Length:

For variable length decoding, a minimum and maximum length may be set.

Fixed Length:

For fixed length decoding, two different lengths may be set.

Maxicode

Set Length 1

Specifies one of the barcode lengths for Maxicode Length Control. Length 1 is the minimum

label length if in V

ariable Length Mode, or the first fixed length if in Fixed Length Mode.

Characters can be set from 0001 to 0145 characters in increments of 0001 (pad with zeroes).

See page 219 for detailed instructions on setting this feature.

Maxicode Length Control = Variable Length

Maxicode Length Control = Fixed Length

DEFAULT

$CMXLC00(CR)

$CMXLC01(CR)

Select Maxicode Length 1 Setting

To configure this feature, scan the ENTER/EXIT PRO-

GRAMMING MODE barcode above, then the barcode at

eft followed by the digits from the Alphanumeric char-

acters in

Appendix D, Keypad representing your

desired character(s). End by scanning the ENTER/EXIT

arcode again.

Make a mistake? Scan the CANCEL barcode to abort and

not

save the entry string. You can then start again at the

beginning.

CANCEL

$CMXL1

DEFAULT

0001 = Length 1 is 1 Character