Programming Reference Guide

Enter/Exit Programming Mode QR Code
182 HP Wireless Barcode Scanner
QR Code Set Length 2
This feature specifies one of the barcode lengths for QR Code Length Control. Length 2 is
the maximum label length if in Variab
le Length Mode, or the second fixed length if in Fixed
Length Mode. Characters can be set from 0001 to 7,089 characters in increments of 0001
(pad with zeroes).
See page 219 for detailed instructions on setting this feature.
Select QR Code Length 2 Setting
To configure this feature, s
can the ENTER/EXIT PRO-
GRAMMING MODE barcode above, then the barcode at
l
eft followed by the digits from the Alphanumeric char-
acters in
Appendix D, Keypad representing your
desired character(s). End by scanning the ENTER/EXIT
b
arcode again.
Make a mistake? Scan the CANCEL barcode to abort and
not
save the entry string. You can then start again at the
beginning.
CANCEL
$CQRL2
~
DEFAULT
Length 2 is 7,089 Characters