Programming Reference Guide

Enter/Exit Programming Mode
192 HP Wireless Barcode Scanner
Wireless Beeper Features
Several options are available to configure beeper behavior for RF operation.
Good Transmission Beep
Enables/disables the Good Transmission Beep indication. When enabled, a beep occurs
when a Label is correctly transmitted to the base.
Beep Frequency
Adjusts radio-specific beep indications to sound at a low, medium or high frequency,
selectable from the list below (controls the beeper’s pitch/tone).
Good Transmission Beep = Disable
Good Transmission Beep = Enable
$CBTAB00(CR)
$CBTAB01(CR)
DEFAULT
Beep Frequency = Low
Beep Frequency = Medium
Beep Frequency = High
DEFAULT
$CBTBF00(CR)
$CBTBF01(CR)
$CBTBF02(CR)