Programming Reference Guide

Enter/Exit Programming Mode

195

Docking Beep

Enables/disables a beep indication when the handheld is placed in the Base Station.

Leash Alarm

This setting specifies the number of seconds to sound the Leash Mode beeps (three per

second) when the handheld goes out of range. This is especially useful in instances where

the scanner might inadvertently have been placed in a bag or cart.

For this mode to be effective, the scanner must

be linked to the Base Station. If the scanner

is asleep or disconnected from the Base Station, there is no way for it to know where it is

relative to the Base Station because communication is not active between the devices.

Docking Beep = Disable

Docking Beep = Enable

$CBTCB00(CR)

$CBTCB01(CR)

DEFAULT

Leash Alarm = Disabled

Leash Alarm = 1 Second

Leash Alarm = 2 Seconds

DEFAULT

$CBTLB00(CR)

$CBTLB01(CR)

$CBTLB02(CR)