Manualshelf

Programming Reference Guide

ManualsBrandsHP ManualsDesktopsHP rp5800 Retail System
201202203204205206207208209210
Enter/Exit Programming Mode
Programming Reference Guide
197
Configuration Updates
See page 238 in “References” for detailed information and examples of these features.
Automatic Configuration Update
When this feature is enabled, a scanner and its linked Base Station can automatically ensure
they stay in sync with regard to application hardware and/or configuration. See page 238 for
more information on this feature.
Copy Configuration to Scanner
Scan the following label to copy the current Base Station configuration to the scanner. Use
this method when the Auto Configuration Update feature is disabled and you want a one-time
configuration update to be performed on the scanner.
Copy Configuration to Base Station
Scan the following label to copy the current scanner configuration to the Base Station. Use
this method when the Auto Configuration Update feature is disabled and you want a one-
time configuration update to be performed on the Base Station.
Automatic Configuration Update = Disable
Automatic Configuration Update = Enable
$CBTCU00(CR)
$CBTCU01(CR)
DEFAULT
Do not scan an ENTER/EXIT PROGRAMMING MODE label in conjunction
with this barcode.
Do not scan an ENTER/EXIT PROGRAMMING MODE label with this barcode.
py g
Copy Configuration to Scanner
Copy Configuration to Base Station
Cpycfg2Ba