Programming Reference Guide

Enter/Exit Programming Mode
198 HP Wireless Barcode Scanner
Batch Features
Batch Mode
This option specifies whether to store labels in the handheld while disconnected from the
base. Options are as follows:
• Disabled — The handheld will not store/
batch labels.
• Automatic — The handheld will store labels to memor
y when the handheld goes out of
range and is disconnected from the remote device.
• Manual — The handheld will always store labels to
Flash memory. The user must
manually send the stored labels to the remote device using a special "batch send" label.
Send Batch
When the scanner is configured in Manual Batch Mode, use the following barcode to initiate
sending of labels stored in batch memory.
Batch Mode = Disabled
Batch Mode = Automatic
Batch Mode = Manual
DEFAULT
$CBTBM00(CR)
$CBTBM01(CR)
$CBTBM02(CR)
Do not scan an ENTER/EXIT PROGRAMMING MODE label in conjunction
with this barcode.
BatchSend
Send Batch