Programming Reference Guide

Enter/Exit Programming Mode
Programming Reference Guide 199
Erase Batch Memory
When the scanner is configured in Manual Batch Mode, use the following barcode to erase
any labels stored in batch memory.
RF Batch Mode Transmit Delay
Specifies the delay in 10 msec increments between transmitting labels stored in batch
memory.
Do not scan an ENTER/EXIT PROGRAMMING MODE label in conjunction
with this barcode.
Erase Batch Memory
RF Batch Mode Transmit Delay = No Delay
RF Batch Mode Transmit Delay = 50 mS
RF Batch Mode Transmit Delay = 100 mS
RF Batch Mode Transmit Delay = 0.5 seconds
RF Batch Mode Transmit Delay = 1 second
DEFAULT
$CBTTD00(CR)
$CBTTD05(CR)
$CBTTD0A(CR)
$CBTTD32(CR)
$CBTTD64(CR)