Programming Reference Guide

Enter/Exit Programming Mode

201

BLUETOOTH-SPECIFIC FEATURES

The features in this section are specific to Bluetooth wireless operation. Also reference the

Setup section for instructions on Linking the BT Scanner to a PC, starting on page 7.

RF Address Stamping

These features allow configuration of source radio data inclusion.

Source Radio Address Transmission

Enables/disables the ability of source radio address information to be transmitted to the host

and, if so, at what position with respect to the label data. See page 238 in “References” for

detailed information and examples

for setting this feature.

When included as a prefix, the source-radio ID is displayed after all label

formatting has been applied. The 6 byte hex address is sent as 12 ascii char-

acters, i.e., an address of 00 06 66 00 1A ED will be sent as (shown in hex):

30 3

0 30 36 36 36 30 30 31 41 45 44

Source Radio Address Transmission = Do Not Include

Source Radio Address Transmission = Prefix

DEFAULT

$CBTAS00(CR)

$CBTAS01(CR)