Programming Reference Guide

Enter/Exit Programming Mode

204 HP Wireless Barcode Scanner

BT PIN Code

After enabling Security Mode (see "BT Security Mode" on page 203), specify whether you

want to set a 4-digit or a 16-digit PIN Code. See page 239 for detailed information and

examples for setting this feature.

Select PIN Code Length

Set PIN Code

Determine the desired characters for the PIN code, then convert to hexadecimal using the

ASCII Chart on

the inside back cover of this manual. See page 239 for detailed information

and examples for setting this feature.

Select 4-character BT PIN Code

Select 16-character BT PIN Code

$CBTPS00\r

DEFAULT

~$CBTPS01\r

Set 4-character BT PIN Code

To configure this feature, s

can the ENTER/EXIT PRO-

GRAMMING MODE barcode above, then the barcode at

eft followed by the digits from the Alphanumeric char-

acters in

Appendix D. Keypad representing your

desired character(s). End by scanning the ENTER/EXIT

arcode again.

Set 16-character BT PIN Code

CANCEL

Make a mistake? Scan the CANCEL barcode to

abor

t and not save the entry string. You can then

start again at the beginning.

$CBTPC

$CBTP6

DEFAULT

31323334 = Default PIN Code is 1234