Programming Reference Guide

Enter/Exit Programming Mode

208 HP Wireless Barcode Scanner

Motion Sensitivity

Defines discrete set of levels for scanner motion sensitivity when in handheld use.

Motionless Timeout

Specifies the waiting time in 100 millisecond ticks to assume that the scanner is in a

motionless condition. The selectable range is 500 msec to 25.5 Seconds. When no motion

event is detected for a period of time longer than this timeout, the software assumes the

scanner is in a motionless condition. This normally results in returning the scanner to Stand

Mode. This option relates to such features as Aimer On and Stand Mode Object Sense

scanning with respect to motion. See "Mo

tionless Timeout" on page 240 in References.

Motion Sensitivity = Low

Motion Sensitivity = Medium

Motion Sensitivity = High

$CMOSY00(CR)

$CMOSY01(CR)

DEFAULT

$CMOSY02(CR)

Select Motionless Timeout Setting

To configure this feature, scan the ENTER/EXIT PRO-

GRAMMING MODE barcode above, then the barcode at

eft followed by three digits from the Alphanumeric

characters in

Appendix D Keypad representing your

desired character(s). End by scanning the ENTER/EXIT

arcode again.

Make a mistake? Scan the CANCEL barcode to abort and

not

save the entry string. You can then start again at the

beginning.

CANCEL

$CMOTO

DEFAULT

020 = Motionless Timeout = 2 seconds