Programming Reference Guide

Enter/Exit Programming Mode

ACK Character

This setting specifies an ASCII character or hex value to be used as the ACK character. ASCII characters or

any hex value from 0 to 0xFF can be selected. See page 211 for more information.

NAK Character

This setting specifies an ASCII character or hex value to be used as the NAK character. ASCII characters or

any hex value from 0 to 0xFF can be selected. See page 212 for more information.

Setting to previously defined characters such as XON, XOFF, or host commands conflicts with normal

operation of this character.

Select ACK Character Setting

Setting to previously defined characters such as XON, XOFF, or host commands conflicts with normal

operation of this character.

Select NAK Character Setting

$CR2AC

DEFAULT

0x06 ‘ACK’ Character

$CR2NA

DEFAULT

0x15 ‘NAK’ Character