Programming Reference Guide

Enter/Exit Programming Mode Label ID
36 HP Wireless Barcode Scanner
Label ID
A Label ID is a customizable code of up to three ASCII characters (convert to Hex using the
ASCII Chart on the inside back cover of this manual), used to identify a barcode symbology
type. It can be appended previous to or following the transmitted barcode data depending
upon how this option is enabled. This feature provides options for configuring custom Label
IDs or individually per symbology (see "Individually Set Label ID" on page 37). If you wish
to program the scanner to always include an indus
try standard label identifier for ALL
symbology types, see the previous feature "Global AIM ID" on page 33.
See Label ID, starting on page 223 of “References” for more informa
tion on setting this
feature.
Label ID: Pre-Loaded Sets
The scanner supports two pre-loaded sets of Label IDs. See Label ID: Pre-loaded
Sets, starting on page 223 for details on the USA set and EU set.
CAUTION
When changing from one Label ID set to another, all other scanner
configuration settings, including the host interface type, will be
erased and set to the standard factory defaults. Any custom config-
uration or custom defaults will be lost.
Label ID Pre-loaded Set = USA Set
Label ID Pre-loaded Set = EU Set
$AE(CR)
$Ae(CR)
DEFAULT