Programming Reference Guide

Enter/Exit Programming Mode
56 HP Wireless Barcode Scanner
Pick Mode
Specifies the ability of the scanner to decode labels only when they are close to the center of
the aiming pattern. This allows the scanner to accurately target labels when they are placed
close together, such as on a pick sheet.
Stand Mode Sensitivity
Sets the sensitivity level for stand mode wakeup. Choices are low, medium and high.
This feature is not compatible with Multiple Labels Reading in a Volume.
Pick Mode = Disable
Pick Mode = Enable
DEFAULT
$CSNPM00(CR)
$CSNPM01(CR)
Stand Mode Sensitivity = Low
Stand Mode Sensitivity = Medium
Stand Mode Sensitivity = High
$CSMSE00(CR)
$CSMSE01(CR)
DEFAULT
$CSMSE02(CR)