Programming Reference Guide

Enter/Exit Programming Mode

58 HP Wireless Barcode Scanner

Stand Illumination Control

Controls the illumination status while the reading mode is stand mode and the scanner is

attempting to detect objects.

Motion Still Timeout

Motion Still Timeout specifies the waiting time after which no motions is detected. When no

motion is detected for period of time longer than the set Motion Still Timeout period, the

scanner assumes it is in a motionless condition. The selectable setting are from 500 to

25,500 milliseconds in 100 millisecond increments. The default is 2 seconds. This option

relates to such features and the Aimer On timing and Stand Mode Object Sense scanning

with respect to motion. See page 240 in "References" for detailed informat

ion on setting this

feature.

Stand Illumination Control = OFF

Stand Illumination Control = ON

Stand Illumination Control = Dim

DEFAULT

$CSMIL00(CR)

$CSMIL01(CR)

$CSMIL02(CR)

Select Motion Still Timeout Setting

To configure this feature, scan the ENTER/EXIT PRO-

GRAMMING MODE barcode above, then the barcode at

eft followed by the digits from the Alphanumeric char-

acters in

Appendix D, Keypad representing your

desired character(s). End by scanning the ENTER/EXIT

arcode again.

Make a mistake? Scan the CANCEL barcode to abort and

not

save the entry string. You can then start again at the

beginning.

CANCEL

$CMOTO/r