Programming Reference Guide

Enter/Exit Programming Mode
62 HP Wireless Barcode Scanner
Partial Label Reading Control
Enable/Disable to ignore partial labels to be read within the boundary of the field of view.
Decode Negative Image
Enable/Disable the ability to decode a negative image for all symbologies. When this feature
is enabled, you will be unable to read normally-printed labels or programming labels in this
manual. Scan the “Disable” barcode below to return the scanner to its default for this
feature. To set decoding for only 2D codes, go to 2D Normal/Inverse Symbol Control" on
page 161. For additional options, see the HP Configuration application.
Image Capture
For information and a list of options for Image Capture, use the HP Configuration
application, available for free download from the HP website.
Partial Label Reading Control = Disable
Partial Label Reading Control = Enable
IPPL00
IPPL01
Unlike some programming features and options, Decode Negative Image selec-
tions require that you scan only one pro
gramming barcode label. DO NOT scan
an ENTER/EXIT barcode prior to scanning a Decode Negative Image barcode.
CAUTION
When this feature is enabled, you will be unable to read other programming
labels in this manual.
Decode Negative Image = Disable
Decode Negative Image = Enable
$P,CIPVR00,P(CR)
DEFAULT
$P,CIPVR01,P(CR)