Programming Reference Guide

Enter/Exit Programming Mode

MULTIPLE LABEL READING

In standard (default) mode, when the scanner’s aiming system is activated (by a trigger pull,

motion or other method depending on the mode), it then acquires and processes each image

in the area in front of it (the Volume). In this case, the scanner stops processing the image

once it decodes a label. If several labels are present in the volume, only the first label

encountered is decoded and sent.

When Multiple Reading Mode is enabled, t

he scanner keeps on processing the image until

all the labels present are decoded. The scanner then sorts the data from all the barcodes (if

configured to do so) before transmitting it.

Multiple Labels per Frame

Specifies the ability of the scanner to decode and transmit a set of code labels in a specific

volume and in a single frame of time. When in Multiple Labels per Frame the scanner beeps

and turns on the good read LED indication for each code read in a frame.

When Multiple Labels Mode is enabled, ISBT pairing,

ABC Codabar pairing, and

composites are not allowed.

Multiple Labels per Frame = Disable

Multiple Labels per Frame = Enable

DEFAULT

$CSNML00(CR)

$CSNML01(CR)