User Guide - HP Retail Integrated Barcode Scanner
Conguring the Interface
The scanner supports USB as the host interface. Upon completing the physical connection between the
scanner and its host, select the desired Interface option (USB HID KBD is default) by scanning the appropriate
bar code to select your system’s interface type.
If you want to customize additional settings and features associated with the USB interface, proceed to the
corresponding chapter in the HP Retail Integrated Barcode Scanner PRG.
NOTE: Unlike some other programming features and options, USB type selections require that you scan only
one programming bar code label. DO NOT scan an ENTER/EXIT barcode prior to scanning an interface
selection bar code.
USB-COM
USB Com to simulate RS-232 standard interface
Figure 4-3 Select USB-COM-STD
NOTE: Install the correct USB Com driver from the CD included with your product.
Keyboard Interface
Select options for USB Keyboard Interfaces.
USB Keyboard with alternate key encoding
Figure 4-4 Select USB Alternate Keyboard
USB Keyboard with standard key encoding
Figure 4-5 Select USB Keyboard
Scancode Tables
See the HP Retail Integrated Barcode Scanner Programming Reference Guide (PRG) for information about
control character emulation which applies to keyboard interfaces.
Using the Scanner 9