User Guide - HP Retail Integrated Barcode Scanner
Reading Parameters
The scanner default is Automatic Object Sense Reading mode. Simply present the bar code label in front of
the scanner and center the aiming pattern and illumination system to capture and decode the image. See
Using the Scanner on page 8 for more information.
The aiming system will briey switch o after the acquisition time, and if no code is decoded will switch on
again before the next acquisition. While movement and the object are being sensed, illumination will remain
on until the symbol is decoded.
As you read code symbols, adjust the distance at which you are holding the object to optimize reading
performance.
Aiming System
A number of options for customizing control of the Aiming System are available. See the HP Retail Integrated
Barcode Scanner Programming Reference Guide (PRG) for more information and programming bar codes.
Good Read Green Spot Duration
Successful reading can be signaled by a good read green spot indication.
Use the bar codes that follow to specify the duration of the good read pointer beam after a good read.
Figure 5-2 ENTER/EXIT PROGRAMMING MODE
Figure 5-3 Disabled
Figure 5-4 Short (300 ms)
Figure 5-5 Medium (500 ms)
Figure 5-6 Long (800 ms)
12 Chapter 5 Programming the Scanner