User Guide - HP Retail Integrated Barcode Scanner
INDICATION DESCRIPTION LED BEEPER
acknowledges each portion as
it is successfully scanned.
Label Programming Mode
Acceptance of Programming
Conguration option(s) have
been successfully programmed
via labels and the scanner has
exited Programming Mode.
N/A Scanner sounds one high
frequency beep and 4 low
frequency beeps followed by
reset beeps.
Label Programming Mode
Cancel Item Entry
Cancel label has been scanned. N/A Scanner sounds two times at
low frequency and current
volume.
Error Codes
Upon startup, if the scanner sounds a long tone, this means the scanner has not passed its automatic Selftest
and has entered FRU (Field Replaceable Unit) isolation mode. If the scanner is reset, the sequence will be
repeated.
NOTE: To reset the scanner, insert a straightened paper clip into the reset hole and push rmly.
The following table describes the LED ashes/beep codes associated with an error found.
Number of LED Flashes/Beeps Error Corrective Action
1 Conguration Contact Help desk for assistance
2 Interface PCB Contact Help desk for assistance
6 Digital PCB Contact Help desk for assistance
11 Imager Contact Help desk for assistance
20 Appendix B Technical Specications