Datasheet

QuickSpecs

HP Z24s 23.8-inch IPS UHD Display

Options and Accessories

c04622500 — 15253 — Worldwide — Version 2 — April 1, 2015

Page 10

ENERGY STAR is a registered mark owned by the U.S. government. All specifications represent the typical specifications provided

by HP's component manufacturers; actual performance may vary either higher or lower. The only warranties for HP products and

services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be

construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained

herein.

1. MHL 2.0 port will charge a MHL compatible smart phone and tablet battery. Requires the smart phone or tablet to be enabled for MHL or

have an HDMI dongle to connect to the monitor. See your mobile device specifications.

2. External power supplies, power cords, cables and peripherals are not Low Halogen. Service parts obtained after purchase may not be

Low Halogen.

3. EPEAT® registered where applicable/supported. EPEAT registration varies by country. See www.epeat.net for registration status by

country.

4. Service levels and response times for HP Care Pack Services may vary depending on your geographic location. Service starts from date

of hardware purchase. Restrictions and limitations apply. See www.hp.com/go/cpc for details.

5. The HP Quick Release has been designed to support a maximum of up to 24 lbs (10.9 kg) for all devices mounted. Because mounting

surfaces vary widely and the final mounting method and configuration may vary, mounting fasteners are not supplied (other than the

VESA-compliant screws). HP recommends that you consult with a qualified engineering, architectural or construction professional to

determine the appropriate type and quantity of mounting fasteners required for your application and to ensure that your mounting

solution is properly installed to support applied loads.