HP SureStore AutoBackup Administrator's Guide - Not Orderable

Load Cartridge Button
Press the Load Cartridge button to load the selected cartridge from the magazine into
the drive and then put the autoloader into stacker mode. In stacker mode, the loaded
cartridge is used first; when it is full, or the host computer sends an UNLOAD
command, the autoloader replaces it with the cartridge from the next highest
numbered slot in the magazine. See Autoloader Modes of Operation for more
information on stacker mode.
HP SureStore DAT40x6 and Language
Selection
HP SureStore DAT40x6 models allow you to localize the LED display so that
messages are displayed in the desired language.
Switch on the autoloader and hold down the Select button on the front panel
for five seconds to access the Language? feature.
1.
Press the Select button to scroll through the available languages. The selected
language is displayed in the LCD display.
If you select Numeric, messages will be displayed as numerical codes, which
are defined below.
2.
Press the Load button to store the selected language and exit the language
selection utility.
3.
To exit the language selection facility without selecting a language, press the Enter
button. If the Select button is not pressed for two minutes, the drive will
automatically exit the language selection facility without selecting a language.
Eject Button
Front Panel Lights, Autoloader
file:///D|/ADMIN_~1/eng/tape/lights_a.htm (5 of 17) [5/3/2000 3:33:42 PM]