HP SureStore AutoBackup Administrator's Guide - Not Orderable

Press the Eject button to start the unload process. The drive unloads any cartridge
that is currently loaded, and the changer mechanism returns the cartridge to the
magazine. The magazine is then ejected.
You can also use the Eject button to force an ejection in an emergency. See Forcing
Ejection for more information on when and why you might do this.
Note: The host computer can disable the Eject button by issuing a SCSI PREVENT
MEDIA REMOVAL command.
Front Panel Messages
This section describes:
Status Messages
Error Messages
Information Messages
HP SureStore DAT40x6 and Number Codes
Messages
Note: the HP SureStore DAT40x6 autoloader also displays the URL of our World
Wide Web Support page with certain messages.
Status Messages
The status messages that appear on the front panel inform you of activity in five
areas:
The self-test
Magazine activity -- if the magazine is being checked or ejected
Cartridge activity -- if a cartridge is being loaded or unloaded, or if the heads
are being cleaned
Tape activity -- reading, writing, searching, rewinding and so on
Firmware upgrading
Error Messages
The front panel display can display a range of error messages relating to the
Front Panel Lights, Autoloader
file:///D|/ADMIN_~1/eng/tape/lights_a.htm (6 of 17) [5/3/2000 3:33:42 PM]